R/C Tech Forums - Tekno MT410

R/C Tech Forums (https://www.rctech.net/forum/)

- Monster Trucks (https://www.rctech.net/forum/monster-trucks-46/)

- - Tekno MT410 (https://www.rctech.net/forum/monster-trucks/968302-tekno-mt410.html)

found this in the eb48 thread. looks like a few mm left of room between esc and motor.

http://www.rctech.net/forum/14582931-post1878.html

Quote:

Originally Posted by Mopar2Ya (Post 14741435)

Are the shocks the same length as the ET(it appears they are)? Would ET shock towers be an upgrade(I know the body mounts wont fit)? Would an EB chassis be an upgrade?

I would get the Tekno aluminum servo horn & shock caps. I have yet to try the Delrin shock parts.

I'll reword part of my question. Are the MT towers/chassis a downgrade from the EB48.3?

Quote:

Originally Posted by teeforb (Post 14743218)

Are these .3 parts?

Will a Truggy sized motor fit? The hw 2250 is Truggy sized.

I cant help w/HW, but here is a pic of my Tekno EB48.3, w/Tekin truggy motor & RX8.
http://www.rctech.net/forum/14616037-post1979.html

Quote:

Originally Posted by celt (Post 14743302)

I think Tekno fully expects this to be an option for folks who want to do just that...

If you look at the "MT410 Body Reference Chart," Tekno speaks to that directly. They list some bodies denoted with a "T" - "Requires truggy chassis and driveshafts (TKR5601 & TKR5676 or TKR5676A)

They even list the required parts for you, how cool is that?

Yeah I saw that. Interesting pick of bodies, whoever made that did their research. This does however require you to buy a $130 chassis + dogbone on top of the kit (Edit: turns out its a bit less than that for both). Shorter wheelbase is good for monster trucking I suppose.

Quote:

Originally Posted by teeforb (Post 14743448)

This is not the Truggy chassis. I believe the eb48/sl chassis.

I believe that's what I implied in my comment. For some reason this truck looks odd to me with the short EB48 wheelbase and wide stance with those MT tires. If you put some thick fluid in the center diff, I'm sure this thing would flip over all the time.

Quote:

Originally Posted by RepEvox (Post 14743561)

I'm sure this thing would flip over all the time.

I think that's the whole point behind the short-wheel-based niche.

build video on RC Netwwork. curiouse as to which vehicle it shares the most parts with ? EB,ET. or SCT ? or o Mutt of all of the above ?

in 4 days ? from the time you posted ordered ?

Quote:

Originally Posted by bob.less (Post 14743750)

in 4 days ? from the time you posted ordered ?

Friday from Tekno RC...fellas are on the ball.

Well
Finally a kit that I want to build\
20+ years and all these RTR's that are out
this truck looks great!

Quote:

Originally Posted by teeforb (Post 14743122)

Will the xr8 fit?

Personally I believe the more accurate answer is "kind of". It definitely won't fit with a truggy can motor and it takes a shoehorn and maybe even some mudguard trimming with a buggy can motor. I love Teknos but their electronics space is uber tight.

Quote:

Originally Posted by kmax1000 (Post 14744724)

The URL I posted above shows both the xr8 and Truggy motor fitting into an EB48. Also Tekno confirmed it will fit as well.

Quote:

Originally Posted by teeforb (Post 14743448)

This is not the Truggy chassis. I believe the eb48/sl chassis.

looked it up this morn. I think its the SCT chassie. had to go thru PT#s for mt. eb and sct

Quote:

Originally Posted by bob.less (Post 14744868)

looked it up this morn. I think its the SCT chassie. had to go thru PT#s for mt. eb and sct

I see!

Kit Is out for delivery. Rest of stuff will be here Friday.

Proline trencher tires
2017 raptor body
Hw xr8
Hw 74cm 2250kv motor
Smc 4s 6700mah lipo

Should be good!