"Regular user"
Slapjack - Today, 10:18 pm Post #1: | -Flag |
So I have a brushless eMaxx with the tqi radio and tqi Rx. Everything was working fine.... Then I have a new build I am working on so I bought another tqi Rx so I could use my same radio for both trucks. I tried binding the radio to the Rx earlier. When I did it the Rx light was turning solid green but the radio light was blinking green. An I had no steering. I ended up holding the set button on the radio while it was flashing green and it turned solid green but I still had no steering. I then went over to my other eMaxx and the Rx and radio were both Solid green (which is supposed t mean everything is good) but it wasn't giving me any steering on that truck either. I went back to my new build truck and when I turn it on and the radio on I get all solid green but still no steering. I tried to go right into esc calibration (mamba 2) and it won't let do that either. It just seems like the radio isn't communicating with anything anymore. I did move the multifunction knob and steering knob I don't know if that effected something... I am just lost and am not sure what to do. Does anyone know how to fix this or restore defaults to try redoing it? And them I have my old truck now not working either. I just need I get the controller to communicate with th receivers. I am hoping someone knows what to do here.