|
E-SAVAGE CONVERT TO BRUSHLESS SYSTEM
Can Traxxas vxl-3 velineon brushless power
system combo fit into my E Savage? Anyone run it before? Need advise! Any other brushless system to recommend? Thanks |
It'll fit but you'd have to gear it pretty low, 20t pinion on 2sLipo will give you slightly slower than a stock E-Savage, 17/18t on 3s Lipo will be fairly quick, and would be the highest you could go.
Just watch your motor temps, and upgrade your E-Savage drivetrain appropriately (ie, shim the diffs, upgrade to T-Maxx sliders and stock a few dozen spare spur gears! |
Originally Posted by nexxus
(Post 5523789)
It'll fit but you'd have to gear it pretty low, 20t pinion on 2sLipo will give you slightly slower than a stock E-Savage, 17/18t on 3s Lipo will be fairly quick, and would be the highest you could go.
Just watch your motor temps, and upgrade your E-Savage drivetrain appropriately (ie, shim the diffs, upgrade to T-Maxx sliders and stock a few dozen spare spur gears! |
lol true!
|
Originally Posted by nexxus
(Post 5524225)
lol true!
Originally Posted by pinky2252s
(Post 5523865)
Why not just buy a flux lol
Originally Posted by nexxus
(Post 5523789)
It'll fit but you'd have to gear it pretty low, 20t pinion on 2sLipo will give you slightly slower than a stock E-Savage, 17/18t on 3s Lipo will be fairly quick, and would be the highest you could go.
Just watch your motor temps, and upgrade your E-Savage drivetrain appropriately (ie, shim the diffs, upgrade to T-Maxx sliders and stock a few dozen spare spur gears! |
get an 80A EZrun combo :) it comes with a nice big motor, and will easily pwn a VXL system.
|
| All times are GMT -7. It is currently 12:11 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.