how much did you have to do to fit those arms onto the pede? and how much did ti cost? that seems like something i want to do with mine.

some one needs to make a limopede ?

See its a;ll about 4 wheel drive !!!!! I figured someone would post by now!!!

I have a piece of lexan I am going to put on to keep dirt out. I really does not need any more bracing. The alum angle is more than enough. Actually I may just come off of the angle and make a battery hold down to place the under the chassis. I am waiting till I have some more funds to figure out which lipo I want to get for fitment.

As for the arms, I had to do quite a bit of grinding. It was not that much $$ to do, I got the stuff off og ebay. I used the stock axles, but they are about too short. There is some custom parts I had to make. I had to make a spacer so I could use the stock axles with the Jato hubs,since I wanted the bearings. I made up some suspention limiters so the down travel would not pop out the axles.

Here are a couple more pics
http://i20.photobucket.com/albums/b2...ytruggy048.jpg

http://i20.photobucket.com/albums/b2...ytruggy049.jpg

I had to grind some off of the Jato axles back to make it fit, but they are too short.

have you driven it yet? its pretty cool how wide that is.

Well Im thinking of selling my STAMPEDE???? But thats not the saddest thing Ive ever had to face !!!! This morning my XXX NT got ran over by the mailman so I need cash to repair it .... Good thing about it I can go ahead and upgrade parts needed >>>> It isnt as bad as any ones thinking nothing got bent like shocks or turnbuckles but,, shock tower, front wheels, and fuel tanik got bent on the lid some how? Thats the most rediculous thing ever!!! SUCKS :cry:

damn. how bad is it?

Well the front shock tower decintigrated !!! but the shocks and turnbuckles are ok..... the 2 front tires are crumbled ,,well one was the other was cracked and both tires were chewed in half .... The sport tuned pipe was flat!!! :lol:
And the fuel tank got a hole in it !!! nothing was touched from 3/4 all the way back meaning my steering servo is fine !!! All in ALL I just witnessed an over all durability test (not the way I would like too) and the chasis bulkhead and all that heald up great .. I just lost control of it and it started doing donuts on the street and couldnt stop the guy in time!!! So pits for me !!! Got lucky though kinda... Not to much damage.. Plus I can get that AD2 pipe on it..

get a vantage carbon fiber one
they are supposedly great

Its gonna take me about a month now to get it back up and running and when I drive my pede around its just not the same!!!! how much do those pipes run!

Damn I aint made of that kinda money :lol:
That will be a different motor and everything when I buy one of those!!
I wish I had a picture of it !!! Its so sad to see!! Mailmen arent playin around :)

pede aint as fast no, but im sure its still better than nothing. dont sell that hting off man. you will be glad in the long run.

Nope not goin to I was just goin through some emotions with the tripX nt thing!!! Wife made a deal with me so I ordered my parts today :D
GRREAAT!!! It was only 70.00 bucks .. I ended up with the draked pipe and a set of AD2 front wheels so in a couple of weeks Ill get the match!

haha yeah man. been there done that. well trying to get some XXX-NT parts myself now! gone build me up a pede baby! gonna widen and lengthen it.

Ya there A ARMs are super long it should be nice!!!! I havent acctually looked at what all would have to be made to make it work but it should just fine .... I got my parts at the,,, losi parts house.com site pretty good sight indeed!!! They have everything there...

Which PEDE??? youre nitropede?