![]() |
Originally Posted by Scionara05
(Post 15938312)
you will be fine I have run the 12c with no fender splitter and a shaved down front bumper. Main thing is shaving the front splitter because it sticks out further then the bumper and put leverage and cracks the front end
|
Beginner Questions: Body Wings and Tire
Hi everyone,
1. For box stock category, are we allowed to change the rear spoiler wings? e.g. Jomurema body with RTRC rear spoiler or Mclaren GT3 body with lexan rear spoiler. 2. Is there a technique to identify tire softness/ degree? i.e. I have a few pairs of PN tires (which I removed from purchased 2nd hand chassis). They are now mixed up in a bag and I don't know if they are soft, super-soft, mediums etc. so I can't pair them properly. I tried squeezing/stretching them and comparing them to the new tires that I have but I still can't make out what hardness they are (partially also because they are half-used). I don't want to throw the used ones away because they are still usable at 22.6mm. |
Class - Box Stock
Date- 15 Sep 2022
Location- Singapore Race Time- 367.755 seconds Fastest Lap- 4.140 Chassis- MR-03 Body- Jomurema Wheelbase- 98mm Tires- (Front PN Medium) / (Rear PN Soft) Motor- Stock Batteries- PN 750mAH Front Springs- PN Green T-Plate- PN Carbon #4 Motor Mount- MM stock Dampener (If applicable)- Stock spring Dampener Fluid (If applicable)- n.a. Gearing- 7T Pinion / Stock gear diff Notes- Tried front purple & white springs but went back to green springs. ==================== Date- 13 Sep 2022 Location- Singapore Race Time- 379.451 seconds Fastest Lap- 4.253 Chassis- MR-03 Body- Jomurema Wheelbase- 98mm Tires- (Front PN Medium) / (Rear PN Soft) Motor- Stock Batteries- PN 750mAH Front Springs- PN Green T-Plate- PN Carbon #4 Motor Mount- MM stock Dampener (If applicable)- Stock spring Dampener Fluid (If applicable)- n.a. Gearing- 7T Pinion / Stock gear diff Notes- Can’t upload photos yet. |
Originally Posted by AlvBo
(Post 15939172)
Hi everyone,
1. For box stock category, are we allowed to change the rear spoiler wings? e.g. Jomurema body with RTRC rear spoiler or Mclaren GT3 body with lexan rear spoiler. 2. Is there a technique to identify tire softness/ degree? i.e. I have a few pairs of PN tires (which I removed from purchased 2nd hand chassis). They are now mixed up in a bag and I don't know if they are soft, super-soft, mediums etc. so I can't pair them properly. I tried squeezing/stretching them and comparing them to the new tires that I have but I still can't make out what hardness they are (partially also because they are half-used). I don't want to throw the used ones away because they are still usable at 22.6mm. 2. There are tools you can buy for this. |
Originally Posted by chjosi
(Post 15939299)
1. On page 1, with the rest of the rules... "Kyosho Autoscale/White body Complete and unmodified must use original wing or no wing at all."
2. There are tools you can buy for this. |
Originally Posted by AlvBo
(Post 15939409)
Thanks Chjosi. Are the tools specific to RC or something I can get at hardware shops?
|
Thanks for the link Chjosi! Those are VERY similar to the depth guage setup I use the reload ammo for my single shots, but with a finer tip. I'm going to try it out to see if it will work.
AlvBo, those are some GOOD TIMES!!!! Can't wait to see them after you have some time and practice under your belt! CCW is still kickin my arse!!! Take Care and Drive Fast! |
Originally Posted by BoxxerBoyDrew
(Post 15940017)
Thanks for the link Chjosi! Those are VERY similar to the depth guage setup I use the reload ammo for my single shots, but with a finer tip. I'm going to try it out to see if it will work.
AlvBo, those are some GOOD TIMES!!!! Can't wait to see them after you have some time and practice under your belt! CCW is still kickin my arse!!! Take Care and Drive Fast! |
Originally Posted by AlvBo
(Post 15940397)
Thanks Drew. I'm enjoying the process. Is anyone else is participating this month?
Best so far today. https://cimg9.ibsrv.net/gimg/www.rct...f35b9592c.jpeg |
Originally Posted by Poor_Boy
(Post 15940427)
I will be putting in times for Stock, 2wd open, 4wd open and Box stock. I am finding this months layout challenging to run clean laps.
Best so far today. https://cimg9.ibsrv.net/gimg/www.rct...f35b9592c.jpeg |
I am seriously challenged with this layout CCW! I had my fastest lap CW after getting the disk damper setup at 4 seconds flat with only twice needing to reverse in 75 laps! But CCW I can't turn 5 laps without sticking it in the wall and my times are almost as slow as I was when I started! I'll try for 75 laps in the Stock class, but I'm not promising ANYTHING!! LOL
|
Class- Stock
Date-09/28/22 Location- Central Texas Race Time- 7:23 / 443.0 seconds Fastest Lap- 4.75 seconds Chassis- MR-03 Body- Jomurema Wheelbase- 98mm Tires- F- Kyo low height slicks 30* / R- PN KS Radial Soft Motor- stock Batteries- Pn 900maAh Front Springs- green T-Plate- #5 Carbon Motor Mount- MM stock Dampener (If applicable)- PN MR2061 Graphite Disk Damper (both disks, purple springs), PN MR2161 Dual Spring center shock (silver springs) Dampener Fluid (If applicable)- none Gearing-8T Pinion/Stock gear diff Notes- Disk damper/dual spring shock CALMED the car down considerably! I continued to have problems CCW. I ran CW directly after running my posted CCW, and had my fastest 75 laps and turned 3.75, 3.76, & 3.79 in a row! My fastest laps EVER!!! I'm confused why I'm having soo much trouble CCW. Ready for new layout and CW! https://cimg0.ibsrv.net/gimg/www.rct...7ce5d08c26.png https://cimg2.ibsrv.net/gimg/www.rct...3cbf761d24.jpg |
I'm back! Sorry for the long absence! I had several ailments earlier in the year and a new job that has kept me preoccupied. I was only able to get a few runs in this month, but hope to be more active going forward. I'll be posting the new layout for October tomorrow. Get those last minute runs in and posted by midnight EDT tonight!
|
Sept Box Stock
Class-Box Stock
Date-9/18/22 Location-Winston-Salem, NC Race Time-277.4 Fastest Lap-3.48 Chassis-MR-03 ASF Body-McLaren F1 LM Wheelbase-98mm Tires-K30LH fronts, Marka V1R10 rears Motor-Stock Batteries-TRP 747s Front Springs-PN Red T-Plate-Kyosho Carbon Med Motor Mount-Stock MM Dampener (If applicable)-None Dampener Fluid (If applicable)-K 15k grease on top shock Gearing-Stock Gear Diff/7T pinion Notes-No changes from previous month. Only a couple of runs with this car. https://cimg2.ibsrv.net/gimg/www.rct...751bed81e9.png https://cimg2.ibsrv.net/gimg/www.rct...57f69d435.jpeg |
Sept Porsche Cup
Class-RM Porsche Cup Class
Date-9/18/22 Location-Winston-Salem, NC Race Time-288.2 Fastest Lap-3.56 Chassis-MR-03 ASF Body-911 GT1 Wheelbase-90mm Tires-K30LH fronts, Marka 10 rears Motor-Stock Batteries-TRP 747s Front Springs-ATM Deep Blue (Soft) T-Plate-Kyosho Carbon Soft Motor Mount-Stock RM Dampener (If applicable)-None Dampener Fluid (If applicable)-None Gearing-Stock Gear Diff/7T pinion Notes-No changes. Only a couple of runs this month. https://cimg7.ibsrv.net/gimg/www.rct...40eec70c38.png https://cimg2.ibsrv.net/gimg/www.rct...93d888d75.jpeg |
| All times are GMT -7. It is currently 11:39 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.