R/C Tech Forums - View Profile: matt prigmore

Go Back  R/C Tech Forums > Members List
Reload this Page >

matt prigmore's Profile

matt prigmore matt prigmore is offline

Tech Apprentice

About Me

  • About matt prigmore
    suffolk uk


Total Posts
Visitor Messages
General Information
  • Last Activity: 12-07-2022 03:48 PM
  • Join Date: 11-07-2010
  • Referrals: 0

Visitor Messages

Showing Visitor Messages 1 to 3 of 3
  1. 03-12-2013 02:48 PM - permalink
    Thanks for the info wacker1
  2. Wacker1
    03-11-2013 05:42 PM - permalink
    Alternatively, if your an Outdoor Racer running a Spool, you could Buy the HotBodies 46mm Steel Driveshafts(Part No 68794), which are currently Available...........as these have the 2.4mm Pins, you will need to Buy the TCX Solid Axle Cups(Part No 61087) as well though!

    Hope this helps mate!


  3. Wacker1
    03-11-2013 05:41 PM - permalink
    Hi Mat,

    I use the HotBodies HD Ver2 44mm Universal Steel Driveshafts(Part No 61398)in the Front of both my TCXX Chassis's. They have the Larger 2.4mm Pin, as they were originally Designed for the Cyclone WC/Hara Edition & Cyclone TC Cars.
    Unfortunately, they dont make them anymore, but if you search around on the Web(UK & Abroad), you might be able to pick some up.........I Bought mine through Ebay around 12months ago!
    I never bothered to try the Kit 2mm Pin Alloy TCXX Driveshafts in mine, but I've heard that they Wear quite quickly!
    If your mainly an Indoor Carpet Racer, I'd Recommend that you try a GearDiff upfront with Blades, as this takes alot of Stress away from the Transmission & your Std Alloy TCXX Driveshafts will last noticeably longer! I always run one Indoors!

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2022 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.