Looking for:
 

Looking for this items ASAP.....

Standard S3003
both ears intact and gears are nt destroyed
Buget price is 500

Any cheap but in gud condition reciver
ung pwde sa 75.530 mhz at channel 67

ESC with No motor limit or 23t Motor Limit or 12t motor limit
ung mura lng if meron
buget is 2k and up

Futaba 2phka,2pcka or 2ph
must cme wd 2 servos
and one reciver
buget 1.5k up

if an1 intrested on my TA03 just text me

Contact number is (09175230791)

FatboyJoe, you can use any tamiya made 4WD touring chassis. even the TRF specials like the TB-Evo series, 414 and 415...

For Sale

2sets

Tamiya Racing Wing Set (brand new never cut or opened)
-direct replacement for tamiya bodyshells with hard plastic wings
-wings made of lexan for less weight
-wing struts can be adjusted for low or high downforce
-same wing as included in the Ferrari 360 Modena Challenge body


will sell each set at 300 pesos or 500 for the 2 sets together (FIXED)



Tamiya Gravel Hound 4WD buggy SOLD!!!

for inquiries on the wings, just PM me.[/QUOTE]

For trade is a mint( barely run shelf queen)TTech Predator P8(model before the X10), buggy has been completely torn down and built from scratch using many new parts, including brand new chassis, gears, gearboxes as well as some other parts that were n.i.p before being fitted. Hence this buggy is as close to new as you're likely to get and is fully upgradeable to X10 spec at a later date. It's not fully assembled as i could not find the time to do it. Willing to trade for a mint RCPD TC3 "O" V2 or X-Factory X-5. Anyone interested for a trade, drop me a pm. Cheers

Good condition CAT 3000(had only 2 runs),bodyshell and under tray sprayed but in good condition.Changed stock upper deck screws to titanum allen screws, extra brand new in pack bodyshell,brand new set of rear arms,Brand new in pack 92t spur.Servo mount is missing(Tamiya or any other servo mount will fit).Box and manual(printed)included.Looking to trade for a good condition XX4 or XXX4.

ALL FORSALE ITEMS ARE FRESH!:

-Team ORION katana 23turn SL motor 80-85% comm.- 700 neg!!

-regulated HSE POWER supply 12v, 12.5amp max load SMALL & LIGHTWEIGHT- 2.5k neg!!! (rarely used almost bnew)

-Futaba 3pj w/ pcm1024 receiver and xtals plus tx bag WITH BOX- 6.5k

text na!!! 0928-6011466

Set of tx and rx xtals:

FM27mhz 27.145 - 350 for both - reserved til friday

FM40mhz 40.715(not used) - 400 for both - or trade to 75mhz tx&rx

LOOKING FOR ASAP:

-Novak XXL 75mhz (fresh and willing pa test)

salamat!!! :nod:

Looking for radio:

3pk, m8 or helios

to trade with

PS2 SLim 2nd release Bnew

1xdualshock2 controller
online startup disc
av cable
power cable and adaptor
box and manual

For sale:

TL01 Stadium Raider
Full ball bearings
Adjustable Tie Rods
Lightweight Kingpins x 3
aluminum Hex hubs
Speed Tuned Gears
Wheels and tires
body
spares (bumper, tie rod, stock gearing system, arms)
will include BYD 1300mah Battery Stick Pack
Mabuchi Stock motor
Mechanical Speed Control, needs rewiring

3.5k

TL01 Universal Shafts good as new 1k or buy it together with the TL01 for 500php

TG10 MK1

Subaru Body WRC 99
Wheels and tires
Fuel Tank
Exhaust system
box and manual
2 speed tranny
VR15S engine
5k if you opt to buy the car only, no engine that would be 2k or give be your best offer.

TGX Mk1 TS
1.8th scale
VR15S engine
few scratches on the chassis
2 speed tranny
with body (good as new Toyota Supra Tamiya brand)
wheels and tires
exhaust system
engine mount
box and manual

6k or trade to personal AMB transponder

looking for:
 

Do you have any of this items?OR KNOW ANYBODY THAT HAVE ONE?

1.BELTS FOR MUGEN MTX-3(FRONT,REAR,SIDE)
2.FOAM TIRES FOR SERPENT VECTOR (FRONT & REAR)
3.29 MHZ FM RECEIVER (UNIVERSAL TYPE) yung pwede sa ko mars.


YOU CAN PM OR TEXT ME....09224849645 :nod: :nod: :nod:

Thank you Tommi, how about the motor? What kind? Thank you :nod:

Looking for a cheap "ready to run" model with remote control kahit walang battery.





LaMusica...

looking for:tamiya c.p.r/m03 hop-ups/baja champ-dagger arms
 

looking for:
any model of tamiya c.p.r. unit
tamiya m03 hop-up parts
baja champ/wild dagger suspension arms
-jay 09179166538

FBJ: mukhang ikaw naman ngayon ang nagbabalak! hehehe ... good luck if you join. for the motor, its likely the Tamiya mod motor. I would think that essentially the only thing that will be "open" is the electronix (including the batts) ... but everything else will have to be tamiya ... that would include the kit and all its components (down to the spurs, pinions, & washers), tires, motors, inserts, etc .... :nod:

9th Tamiya Asia Cup - Philippine Qualifying Championships
Categories and Regulations

General

1. All cars have to be built using only original Tamiya parts and strictly following the instructions provided with those parts.
2. All parts must be used as supplied in the package and/or cut as outlined.
3. Modifications of the original appearance of the car, is not allowed.
4. Motor must be Tamiya brand motor. Only specific motors are permitted by race organizer. Please refer to the individual category regulations.
5. Motor brushes must be from Tamiya.
6. All bodies must be painted and must be cut along the trim lines. No extra vents or holes may be added to the body.
7. Any Tamiya Hop-Up Option and spare part is allowed as long as it is used in the way it designed, and on the vehicle it was designed for.
8. Motor spray, comm drops and bearing oil are allowed.
9. No tire additives are allowed.
10. There must be at least 5 participants in each respective class for the class to be run.
11. Each race will be of 5 minutes duration plus the time to complete the last lap.
12. Drivers must have at least one (1) completed qualifying heat to qualify for the finals.
13. Only the best qualifying heat will be used to determine your grid position in the finals.
14. Your qualified grid position in the finals will be used for all the final heats.
15. For qualifying and final heat, no driver will be allowed to join the race after the heat has been started.
16. Any modifications not described in the regulations are not allowed.
17. Any other issues not clarified in the regulations shall be handled at the discretion of the race organizer.


Stock Touring Class

1. Only TT-01 chassis is permitted to be used in this class.
2. Only CPR01 included in XB2 and TEU-101BK (#45029) are permitted to be used in this class.
3. Any Tamiya battery up to 3600mAh capacity can be used (Stock connectors only)
4. Motors: Mabuchi/Johnson 540 silver can motor only. Any attempt to modify or to influence the ability of the motor is not allowed.
5. Only the following three kinds of tire can be used: #50419 Celica Racing Radial Tire, #50454 Racing Slick Tires, #50810 Racing Semi-Slick Tires
6. Clearance under main chassis parts must exceed 5mm before the race.


M-Chassis Class

1. Allowed Chassis: M-03, M-04
2. Only #53068 RS-540 Sports Tuned Motor can be used. Any attempt to modify or to influence the ability of the motor is not allowed.
3. Any Tamiya battery up to 3600mAh capacity can be used (After market connectors are allowed)
4. Battery wires can be modified at the bottom of connecter to accept other types of speed controller connectors. Wire length must exceed 3cm.
5. Any Brand of ESC can be used.
6. Clearance under main chassis parts must exceed 3mm before the race.
7. Tires: Tamiya M-chassis Tires only
8. Bodies: Tamiya M-chassis bodies only
9. Special Notes: Chassis / Tire / Gear limits
a. M-03 & M-03L / 60D Tires / 20T pinion
b. M-04L / Standard sized 26mm tires / 17T pinion
c. M-04M / 60D Tires / 19T pinion


Buggy Class

1. Cars eligible for qualification are only DF-02 chassis.
2. Clearance under main chassis parts (at the full bottom position) must exceed 5mm before the race.
3. The min. tire diameter (front/rear) must be over 83mm.
4. Only #53068 RS-540 Sports Tuned Motor can be used. Any attempt to modify or to influence the ability of the motor is not allowed.
5. Any Tamiya battery up to 3600mAh capacity can be used (After market connectors are allowed)
6. Battery wires can be modified at the bottom of connecter to accept other types of speed controller connectors. Wire length must exceed 3cm.
7. Any Brand of ESC can be used.
8. Only Kit Supplied tires are allowed.
9. Bodies: Kit supplied bodies only


GT-1 Stock Class

1. The allowable chassis for this class are: TB-01, TB-02, TB-02R TA-04, TA-05 TL-01, TL-01 LA, TA-02, TA-03, FF-01 and FF-02. (Tub Chassis kits only. Carbon plate double deck cars are not permitted in this class)
2. Only the following motors are permitted to be used in this class:
540 Motor, 540 J Motor (#53689), Sports-Tuned Motor (#53068)
Super Stock Type-R Motor (#53476), Super Stock Type-S Motor (#49247), Super Stock Type-T Motor (#53477), Super Stock Type-RR (#49260), Super Stock Type-RR/Gun Metal (#49288), Super Stock Type TZ (#53696), Super Stock Type RZ (#53697)
3. You may use any 6-cell stick pack type battery only. (Matched Packs not allowed)
4. Battery wires can be modified at the bottom of connecter to accept other types of speed controller connectors. Wire length must exceed 3cm.
5. Any Brand of ESC can be used.
6. Clearance under main chassis parts must exceed 5mm before the race.
7. Tires: Tamiya 24mm Tires only
8. Bodies: Tamiya GT bodies only


GT-2 Modified Class

1. Allowed Chassis: TA04, TA-05, TB-02, TB Evolution 1,2,3,4, TRF-414, TRF-415
2. Only the following motors are permitted to be used in this class:
Super Stock Type-R Motor (#53476), Super Stock Type-S Motor (#49247), Super Stock Type-T Motor (#53477), Super Stock Type-RR (#49260), Super Stock Type-RR/Gun Metal (#49288), Super Stock Type TZ (#53696), Super Stock Type RZ (#53697), GT-Tuned Motor (25T) (#53779), Super Modified Motor 11T (#53485 )
3. Batteries: Any 6-cell Brand battery up to 4300mAh capacity. (Matched Packs allowed)
4. Any Brand of ESC can be used.
5. Any motor connector or direct hard wiring to the motor is allowed.
6. Any battery connector or direct hard wiring to the battery is allowed.
7. Clearance under main chassis parts must exceed 5mm before the race.
8. Tires: Tamiya 24mm Tires only
9. Bodies: Tamiya GT bodies & Tamiya Subaru Legacy B4 (made by Ride)

you may also want to download the attached pdf file

9th Tamiya Asia Cup Qualifying Championships Schedule

Qualifying Round/Qualifying Dates/ Venue

Round 1/March 12, 2006/Makati RC Speedway

Round 2/March 26, 2006/JP Raceway

Round 3/April 2, 2006/Makati RC Speedway

Round 4/April 23, 2006/JP Raceway

Round 5/May 7, 2006/JP Raceway

Round 6/May 21, 2006/Makati RC Speedway

Round 7/June 4, 2006/JP Raceway

Round 8/June 18, 2006/Makati RC Speedway

**Race Schedule subject to change**

TAMIYA F201
-schumi type body
-damaged cone (extra cone included)
-all stock
-sports tuned motor
-good condition
2,000.00php

FUTABA MJ radio set
-2 servo
-1 reciever
-1 radio
2,000.00php

sorry sa mga nag-papasend ng pics wla kc ako digi cam or anything that i could use to upload pics