RC equipments for Sale
#3406
wah dean.. kereta sudah jual, wang sudah banyak... now shopping sakan plak... bila mau blanja teh..heheh
#3407
Tech Elite
Originally Posted by tornado
Dik....engko punya keta manyak murah..............
huhu.murah tapi bagus i dun need tons of money anyway
#3408
Tech Apprentice
Spektrum for Futaba 3pk for sale
I have one unit Spektrum for 3PK, module and reciever for sale. 2 months old and condition like new. Selling for RM550 including pos laju within malaysia. Compatible With: Futaba 3PK and 3PJ/ Hitec Aggressor CRX, Lynx, and SRX. Anyone who is SERIOUSLY interested only may contact by PM or SMS at 016 8289339
Cheers.
Cheers.
#3409
Tech Elite
iTrader: (1)
Get out of EP sale
Hi guys,
Selling off my EP car.
Yokomo CGM with PLENTY PLENTY of spares (includes: dogbones/cvds, arms, springs, blue alu hop-ups)
RM600 shipped anywhere in Malaysia (nego)
Katana TL 23T motor. 1 cut. Rm50
Batteries:
4 x Gp3300 Plutonium matched batts - Less than 10 cycles each - RM320 for all
3 x IB3600 practice packs - less than 15 cyc. RM150 for all
Take all for RM1000 and i'll throw in a Novak TC2 Esc AND Futaba s9550 servo free!
Don't PM, just email [email protected] for pics OR directly call 012-3168420
Selling off my EP car.
Yokomo CGM with PLENTY PLENTY of spares (includes: dogbones/cvds, arms, springs, blue alu hop-ups)
RM600 shipped anywhere in Malaysia (nego)
Katana TL 23T motor. 1 cut. Rm50
Batteries:
4 x Gp3300 Plutonium matched batts - Less than 10 cycles each - RM320 for all
3 x IB3600 practice packs - less than 15 cyc. RM150 for all
Take all for RM1000 and i'll throw in a Novak TC2 Esc AND Futaba s9550 servo free!
Don't PM, just email [email protected] for pics OR directly call 012-3168420
Last edited by lee82gx; 08-08-2006 at 05:35 PM.
#3410
Originally Posted by nordin
Mr Rizal.. i PMed u oledi.. mau jual ka takmau jual lu punya cinta kristal?!?.. haiyaa!!....
Lepas ni kalau untung jual buggy tak habis lagi, tinggal beli kereta dgn servo je.main atas tarmac, tak payah susah2 nak cuci kereta lepas main.
#3411
Tech Rookie
R/C EP (TT01D) Drift Spect 4 Sales
Hi Buddies,
Tamiya TT01D kit for sales including 2 units 3300 GP Batteries (6 packs each unit) Ready to Run (not include radio only)
*Full Bearing
*CSV Shock
*1 set Tamiya Rim (Radial tyre)
*1 set Rim with ABS tyre (for drifting)
*Tamiya Adjustable Upper Arm (front & rear)
* Aluminium Servo Stay
*Tamiya Blue Alum TT01D Heatsink
*Tamya Blue Centre Shaft
*Blue wheel flange nut
*Tamiya ESC TEU 101BK
*Sport Tunes Motor
All at one price RM350
For more enquiry call/sms 019-3149791
OR e-mail to [email protected]
ITEM SOLD!!!!!!!!!!! 10/8/2006
Tamiya TT01D kit for sales including 2 units 3300 GP Batteries (6 packs each unit) Ready to Run (not include radio only)
*Full Bearing
*CSV Shock
*1 set Tamiya Rim (Radial tyre)
*1 set Rim with ABS tyre (for drifting)
*Tamiya Adjustable Upper Arm (front & rear)
* Aluminium Servo Stay
*Tamiya Blue Alum TT01D Heatsink
*Tamya Blue Centre Shaft
*Blue wheel flange nut
*Tamiya ESC TEU 101BK
*Sport Tunes Motor
All at one price RM350
For more enquiry call/sms 019-3149791
OR e-mail to [email protected]
ITEM SOLD!!!!!!!!!!! 10/8/2006
Last edited by Kamill; 08-11-2006 at 02:04 AM. Reason: ITEM SOLD!!!
#3412
Tech Rookie
wah brother...i thought u play2 oni wanna sell ur TT01d so cheap for RM350 and upgrade to TA05...
i wish i have money to buy ur car lh...
so lucky lh the new owner....
i wish i have money to buy ur car lh...
so lucky lh the new owner....
#3413
Originally Posted by arghh
wah dean.. kereta sudah jual, wang sudah banyak... now shopping sakan plak... bila mau blanja teh..heheh
cheers,
#3414
Tech Adept
New XR 8 1/8 Car Kit For Sell
One unit new ( unassemble ) XR 8 1/8 car kit. I get this kit from a luck draw. Since I'm not going to race a 1/8, I'll like to let go for a real bargain price. Only RM 900.00 including pos laju to within Malaysia. Parts are available at HMS racing or LKH motorsport.
Interest party can pm me for more info
Interest party can pm me for more info
#3415
Tech Master
iTrader: (2)
1. Brand new plane:
Stearmer BiPlane - Just mainden and owner need money.
Cheap = RM 699. Inclusive 2nd hand 46 engine, and 5 servos
Just fuel up, put receiver and go.
2. Kopropo Precious - Excellent Condition. with Rx.
RM 345
3. Thunder Tiger F1 boat. Fast babe.....
With Servos and Engine. Just put in RX and 2 channel radio. U r good to go. RM 699.
4. Sony Ericsson P910i. Wrapped with Graphite motive skin. Box, Manual, CD, Cradle, Battery, pouch. One year old. RM 1199
All price are firm.
Call 019-6622177
Stearmer BiPlane - Just mainden and owner need money.
Cheap = RM 699. Inclusive 2nd hand 46 engine, and 5 servos
Just fuel up, put receiver and go.
2. Kopropo Precious - Excellent Condition. with Rx.
RM 345
3. Thunder Tiger F1 boat. Fast babe.....
With Servos and Engine. Just put in RX and 2 channel radio. U r good to go. RM 699.
4. Sony Ericsson P910i. Wrapped with Graphite motive skin. Box, Manual, CD, Cradle, Battery, pouch. One year old. RM 1199
All price are firm.
Call 019-6622177
#3416
Super Moderator
iTrader: (76)
Join Date: Nov 2004
Location: Singapore ̡͌ ̴̡ı̴̴̡ ̡̡͡|̲̲̲͡͡͡ ̲▫̲͡ ̲̲̲͡͡π̲̲͡͡ ̲̲͡▫̲̲͡V
Posts: 3,454
Trader Rating: 76 (100%+)
Never been raced before XRAY XB8, car is in great almost brand new condition, did some modifications on the front upper arms, replaced it with rear upper inner and outer camber link ball joints for more cornering and stability. All brand new XRAY bearings with special rubber covers, degreased and lightly oiled with AeroShell Fluid 12 oil for maximum smoothness, long life, highest tolerance and maximum performance.
Option parts added are :
- 4mm Cnc Machined Alu Upper Plate 7075 T6
- Composite Front Brace
- Composite Rear Brace
- Long Soft Front Lower Suspension Arms
- Long Soft Rear Lower Suspension Arms
- 7mm Cnc Machined Alu Front Lower Suspension Holder 7075 T6
- 5mm Alu Front Upper Arm Holder 7075 T6
- Front Anti-Roll Bar 3.0mm
- Rear Anti-Roll Bar 3.0mm
- Cnc Machined Alu Steering Block - Left
- Cnc Machined Alu Steering Block - Right
- Cnc Machined Adjustable Alu Rear Hub Carrier - Left
- Cnc Machined Adjustable Alu Rear Hub Carrier - Right
- Front And Rear Alu Wheel Axle Offset “+2mm” – Hard Coated
- Front And Rear Wheel Nut With Cover - Hard Coated
- Front Diff Outdrive Adapter - Long
- Cnc Machined Alu One Piece Adjustable Engine Mount (one of the alu stands for the engine mount is missing, not an expensive part to replace)
Brand new parts that are not installed on the buggy (not in the pics)
- 3mm Cnc Machined Aluminum Radio Plate 7075 T6
- Radio Case Set
- Steering Servo Mounting Set
- Servo Arm Set
- Adj Steering Rod
- Transponder Mount
- Ball ends, Ball Joints, and various assembly screws
- 5mm CNC Aluminum Front Chassis Brace 7075 T6
- 5mm CNC Aluminum Rear Chassis Brace 7075 T6
- 3mm CNC Aluminum Center Diff Mount Plate 7075 T6
- Center Diff Mount Set
- Brake Cams and Rods
- Steel Brake Pads
- Brake Pad Ferodo (pre-glued to pads)
- Laser Cut Vented Brake Disks
- Various Assembly Screws
Buggy does not come with clutch bell and flywheel set and bodyshell. Will include Pro-Line rims and brand new Pro-Line crime fighter tries(glued to the rims)
I'm looking to trade my XRAY XB8 for a very good condition fully hopped up TTR S3 ( hopefully it comes with both the "delta box" and flat chassis). It's a pity that i gotta let go my XB8...it doesnt suit my driving style....you guys won't regret it..my XB8 is in great near brand new condition with loads of hop up and brand new parts, will only trade for a very good condition TTR S3 with hop up parts (it'll be best if the TTR S3 condition is similar to my XB8), Mugen MBX5 Prospec, hop up GS GL-1, hop up Kyosho 777 SP2, Crono RS03, Cen Matrix Pro or a brand new Sacker pro extreme with engine and pipe..... Anyone keen to trade, do drop me a pm. Cheers
Option parts added are :
- 4mm Cnc Machined Alu Upper Plate 7075 T6
- Composite Front Brace
- Composite Rear Brace
- Long Soft Front Lower Suspension Arms
- Long Soft Rear Lower Suspension Arms
- 7mm Cnc Machined Alu Front Lower Suspension Holder 7075 T6
- 5mm Alu Front Upper Arm Holder 7075 T6
- Front Anti-Roll Bar 3.0mm
- Rear Anti-Roll Bar 3.0mm
- Cnc Machined Alu Steering Block - Left
- Cnc Machined Alu Steering Block - Right
- Cnc Machined Adjustable Alu Rear Hub Carrier - Left
- Cnc Machined Adjustable Alu Rear Hub Carrier - Right
- Front And Rear Alu Wheel Axle Offset “+2mm” – Hard Coated
- Front And Rear Wheel Nut With Cover - Hard Coated
- Front Diff Outdrive Adapter - Long
- Cnc Machined Alu One Piece Adjustable Engine Mount (one of the alu stands for the engine mount is missing, not an expensive part to replace)
Brand new parts that are not installed on the buggy (not in the pics)
- 3mm Cnc Machined Aluminum Radio Plate 7075 T6
- Radio Case Set
- Steering Servo Mounting Set
- Servo Arm Set
- Adj Steering Rod
- Transponder Mount
- Ball ends, Ball Joints, and various assembly screws
- 5mm CNC Aluminum Front Chassis Brace 7075 T6
- 5mm CNC Aluminum Rear Chassis Brace 7075 T6
- 3mm CNC Aluminum Center Diff Mount Plate 7075 T6
- Center Diff Mount Set
- Brake Cams and Rods
- Steel Brake Pads
- Brake Pad Ferodo (pre-glued to pads)
- Laser Cut Vented Brake Disks
- Various Assembly Screws
Buggy does not come with clutch bell and flywheel set and bodyshell. Will include Pro-Line rims and brand new Pro-Line crime fighter tries(glued to the rims)
I'm looking to trade my XRAY XB8 for a very good condition fully hopped up TTR S3 ( hopefully it comes with both the "delta box" and flat chassis). It's a pity that i gotta let go my XB8...it doesnt suit my driving style....you guys won't regret it..my XB8 is in great near brand new condition with loads of hop up and brand new parts, will only trade for a very good condition TTR S3 with hop up parts (it'll be best if the TTR S3 condition is similar to my XB8), Mugen MBX5 Prospec, hop up GS GL-1, hop up Kyosho 777 SP2, Crono RS03, Cen Matrix Pro or a brand new Sacker pro extreme with engine and pipe..... Anyone keen to trade, do drop me a pm. Cheers
Last edited by Funkymojo; 08-12-2006 at 12:57 PM.
#3417
1 unit 3 PK with 2 rx PCM & HRS,2 crystals 40.710,630,bag,2100mah batts- RM 650. SOLD
1 unit M chassis with new Suzuki Swift body still in box - RM 400.
1 unit TT 01 with options- RM 300
1 unit HPI RS4 Micro with Mazda 6 airbrush body with servo- RM 230.
Interested please call 0129271116
1 unit M chassis with new Suzuki Swift body still in box - RM 400.
1 unit TT 01 with options- RM 300
1 unit HPI RS4 Micro with Mazda 6 airbrush body with servo- RM 230.
Interested please call 0129271116
Last edited by RcXtion; 08-13-2006 at 12:27 AM.
#3418
Tech Master
iTrader: (23)
Join Date: Jun 2005
Location: wonderfull place called, MALAYSIA.
Posts: 1,592
Trader Rating: 23 (96%+)
Originally Posted by edwintklee
hi,
FOR SALE
*Tamiya TB02+AE86 body shell (unpainted,uncut)+nice chrome Rims+sliver can motor+DIY drift tyre for sale at RM500 NETT (include extra diff + diff ball +diff plate)
TB02 kit With used body shell and a bit hop up, new tyres + 1 sanwa 102 new servo (no ESC and black motor)....rm300
bodyshell is new, rims are new too, sms me a price, 0126111222.
*1 unit RClab 7 Even pro kit ROLLING CHASIS for sale at rm 450 (as in photo + 2 used body shell) pm me a price.as posting for a friend...... Reduced to RM400
tamiya kit + ae 86 body shell pending sales.....
FOR SALE
*Tamiya TB02+AE86 body shell (unpainted,uncut)+nice chrome Rims+sliver can motor+DIY drift tyre for sale at RM500 NETT (include extra diff + diff ball +diff plate)
TB02 kit With used body shell and a bit hop up, new tyres + 1 sanwa 102 new servo (no ESC and black motor)....rm300
bodyshell is new, rims are new too, sms me a price, 0126111222.
*1 unit RClab 7 Even pro kit ROLLING CHASIS for sale at rm 450 (as in photo + 2 used body shell) pm me a price.as posting for a friend...... Reduced to RM400
tamiya kit + ae 86 body shell pending sales.....
#3419
Item 1 -> Team Losi XXX-T (1/10 electric 2wd stadium truck). Rolling chassis includes bodyshell, tires, Xenon Red 23T motor but no electronics.
RM280 firm
Item 2 -> Tamiya Gravel Hound DF-02 buggy RTR including Tamiya transmitter, receiver, servo, esc, 540 motor. Includes full bearings, upgraded turnbuckles, extra spurs, some other spares (Needs batteries and a charger).
RM320 firm
Item 3 -> Tamiya DF-02 Aluminum Damper Set (ITEM 53701) plus Tamiya Spring Set for DF-02 (Item 53702).
RM120 firm (SOLD)
Item 4 -> Mini-T spares and hop-ups. - Team Losi oil shocks (used), spare arm set, "3 Racing" SSG graphite front bulkhead stiffener, "3 Racing" bodyshell (new in package, unpainted), TOPCAD tires (new, set of four),
RM100 firm. (SOLD)
Item 5 -> Yokomo MR-4TC Custom rolling chassis with center one-way.
RM200 firm
Location: KL.
PM, call, SMS 012-6336808
- Sim
RM280 firm
Item 2 -> Tamiya Gravel Hound DF-02 buggy RTR including Tamiya transmitter, receiver, servo, esc, 540 motor. Includes full bearings, upgraded turnbuckles, extra spurs, some other spares (Needs batteries and a charger).
RM320 firm
Item 3 -> Tamiya DF-02 Aluminum Damper Set (ITEM 53701) plus Tamiya Spring Set for DF-02 (Item 53702).
RM120 firm (SOLD)
Item 4 -> Mini-T spares and hop-ups. - Team Losi oil shocks (used), spare arm set, "3 Racing" SSG graphite front bulkhead stiffener, "3 Racing" bodyshell (new in package, unpainted), TOPCAD tires (new, set of four),
RM100 firm. (SOLD)
Item 5 -> Yokomo MR-4TC Custom rolling chassis with center one-way.
RM200 firm
Location: KL.
PM, call, SMS 012-6336808
- Sim
Last edited by sim600; 08-17-2006 at 06:55 PM.
#3420
Tech Master
iTrader: (2)
Latest dual rotor heli for sales.
Easiest Heli to fly. Now everyone can fly cheaply and less frust.
complete ready to Fly. Dulu.... V2 RM 650.... turun RM 599. Then special offer for V3 RM 499.
Call for introductory offer. Limited offer only coz this is intro to V4 model. Latest version of Lama Heli.
Call 019-6622177 to book item.
Easiest Heli to fly. Now everyone can fly cheaply and less frust.
complete ready to Fly. Dulu.... V2 RM 650.... turun RM 599. Then special offer for V3 RM 499.
Call for introductory offer. Limited offer only coz this is intro to V4 model. Latest version of Lama Heli.
Call 019-6622177 to book item.
Last edited by RedEnzo; 08-15-2006 at 05:05 AM.