RC equipments for Sale
WTS hpi pro4
Item Description: HPI Pro4 Graphite shaft driven (Front one-way, Rear full-lock) c/w graphite wooven shaft, also the purple kit shaft, manual, box, and all the spares, give extra pinion too, exclude the servo... use for drifting, under chassis covered with protector.. can sms me at 016-3336046
Used or New : used
Condition : 9/10
Price : asking RM500
Negotiable : serious buyer
Reason for sell : quit
Location : Kajang, B.B.Bangi,
Mode of Delivery : COD or Post
Picture :
Used or New : used
Condition : 9/10
Price : asking RM500
Negotiable : serious buyer
Reason for sell : quit
Location : Kajang, B.B.Bangi,
Mode of Delivery : COD or Post
Picture :
Tech Adept
iTrader: (3)
SALE SALE SALE
Hi I've got few things to sell ... so many because i'm quitting playing rc Just refer to picture.
THINGS THAT HAVE NOT BEEN SOLD YET...
1 UNIT OF YOKOMO BDM(MASAMI SPECIAL)
NO SERVO AND RECEIVER
FREE:
LOWER CHASIS(NEW) UNUSED BECAUSE THE PREVIOUS STILL OK
FRONT ARM AND REAR (NEW)
C HUB
REAR BELT AND FRONT (NEW) STILL IN PACK
CENTER ONEWAY AND FRONT WAY
SPOOL FRONT
REAR BALL DIFF HAVE BEEN UPGRADED TO BD5 BALL DIFF FOR BETTER HANDLING
JUST BUY ESC AND MOTOR IF U DO HAVE M11S TRANSMITTER JUS PUT BETTERY AND DUN
RM1100 (NEGO) VERY CHEAP PRICE DROPP TO RM900 (nego)..
REASON:QUIT PLAYING RC GOT MANY COMITMENT
Nosram 8.5 t modified motor RM200STILL UP FOR SELLING BECAUSE ACANG KENSELL.. AISYEH MAN ACANG KATA NAK AMEK
THINGS THAT HAVE BEEN SOLD!!!!
LRP SHPIRE COMPETITION RM400 SOLD TO ZAINOL FROM PEKAN
RM300 Sanwa Spektrum Receiver SOLD TO RCCUTM MEMBERS
Sanwa digital Servo RM 220 SOLD TO BUDAK KEDAH
1 UNIT OF M11S SPEKTRUM
CHEAP PRICE
RM1100 COMES WITH DIGITAL SERVO (ERGRV)
AND SANWA SPEKTRUM RECEIVER
UPGRADE WITH 2000NIMH CYBERSOT SONY BETTERY
GOOD CONDITION
REASON:QUIT PLAYING RC GOT MANY COMITMENT
SOLD TO RCCUTM MEMBERS
refer To PICTURE
1 UNIT OF TAMIYA TRF 415MSX
COMES WITH LOTS OF SPARE PARTS..
SOME ARE NEW AND SOME ARE USED AND USEFUL
WHAT U WILL GET ARE:
SOLD-SOLD-SOLD TO NIZAM FROM PANDAN JB
NEW ARM
NEW BELT REAR AND FRONT
NEW C HUB
NEW KCNUCKEL
NEW TRF DEMPER O RING
NEW UNUSED LOWER CHASIS, NEVER BEEN ASSEMBLE YET BECOUSE THE ORIGINAL STILL OK
AND LOTS MORE...
NO ELECTRONIC WILL BE GIVEN.
REASON QUIT PLAYING RC GOT MANY COMITMENT
THANKS TO SUKUN... HE's A NICE FRIEND FOR HELPING ME
PRICE RM800(NEGO)-SOLD-SOLD-SOLD TO NIZAM FROM PANDAN JB
Call now 012-7354883
THINGS THAT HAVE NOT BEEN SOLD YET...
1 UNIT OF YOKOMO BDM(MASAMI SPECIAL)
NO SERVO AND RECEIVER
FREE:
LOWER CHASIS(NEW) UNUSED BECAUSE THE PREVIOUS STILL OK
FRONT ARM AND REAR (NEW)
C HUB
REAR BELT AND FRONT (NEW) STILL IN PACK
CENTER ONEWAY AND FRONT WAY
SPOOL FRONT
REAR BALL DIFF HAVE BEEN UPGRADED TO BD5 BALL DIFF FOR BETTER HANDLING
JUST BUY ESC AND MOTOR IF U DO HAVE M11S TRANSMITTER JUS PUT BETTERY AND DUN
RM1100 (NEGO) VERY CHEAP PRICE DROPP TO RM900 (nego)..
REASON:QUIT PLAYING RC GOT MANY COMITMENT
Nosram 8.5 t modified motor RM200STILL UP FOR SELLING BECAUSE ACANG KENSELL.. AISYEH MAN ACANG KATA NAK AMEK
THINGS THAT HAVE BEEN SOLD!!!!
LRP SHPIRE COMPETITION RM400 SOLD TO ZAINOL FROM PEKAN
RM300 Sanwa Spektrum Receiver SOLD TO RCCUTM MEMBERS
Sanwa digital Servo RM 220 SOLD TO BUDAK KEDAH
1 UNIT OF M11S SPEKTRUM
CHEAP PRICE
RM1100 COMES WITH DIGITAL SERVO (ERGRV)
AND SANWA SPEKTRUM RECEIVER
UPGRADE WITH 2000NIMH CYBERSOT SONY BETTERY
GOOD CONDITION
REASON:QUIT PLAYING RC GOT MANY COMITMENT
SOLD TO RCCUTM MEMBERS
refer To PICTURE
1 UNIT OF TAMIYA TRF 415MSX
COMES WITH LOTS OF SPARE PARTS..
SOME ARE NEW AND SOME ARE USED AND USEFUL
WHAT U WILL GET ARE:
SOLD-SOLD-SOLD TO NIZAM FROM PANDAN JB
NEW ARM
NEW BELT REAR AND FRONT
NEW C HUB
NEW KCNUCKEL
NEW TRF DEMPER O RING
NEW UNUSED LOWER CHASIS, NEVER BEEN ASSEMBLE YET BECOUSE THE ORIGINAL STILL OK
AND LOTS MORE...
NO ELECTRONIC WILL BE GIVEN.
REASON QUIT PLAYING RC GOT MANY COMITMENT
THANKS TO SUKUN... HE's A NICE FRIEND FOR HELPING ME
PRICE RM800(NEGO)-SOLD-SOLD-SOLD TO NIZAM FROM PANDAN JB
Call now 012-7354883
i have a couple of things for sale,
want to start 1/8 buggy
neeeeeed money!!
1. tamiya expec TTU-03 SP transmitter condition 9/10. RM100
notes: like new, no scratches except at the "foot" of transmitter, that one also sikit only.
2.tamiya TRU-02 2 channel receiver condition 7/10, RM40
notes: got a lot of scratches due to bashing my mini-t without bodyshell
3.Extra speed FET speed controller condition 8/10, RM 90
notes: performs well, not much scratches, but its a bit dull in color. doesnt make you go WHOAH, but it performs well
TAKE ALL FOR 200
phone for sale
one "look like car phone" from china, at RM700 can nego~~~ RM 500FIRM
comes with charger for "Inside car" charging
wall charger for battery
usb adapter
box
instruction (chinese)
phone
stylus
touch screen
super loud speaker
512mb micro sd card
and two 2200 mah lipo batt
tip top condition, bought at 1k
want to start 1/8 buggy
neeeeeed money!!
1. tamiya expec TTU-03 SP transmitter condition 9/10. RM100
notes: like new, no scratches except at the "foot" of transmitter, that one also sikit only.
2.tamiya TRU-02 2 channel receiver condition 7/10, RM40
notes: got a lot of scratches due to bashing my mini-t without bodyshell
3.Extra speed FET speed controller condition 8/10, RM 90
notes: performs well, not much scratches, but its a bit dull in color. doesnt make you go WHOAH, but it performs well
TAKE ALL FOR 200
phone for sale
one "look like car phone" from china, at RM700 can nego~~~ RM 500FIRM
comes with charger for "Inside car" charging
wall charger for battery
usb adapter
box
instruction (chinese)
phone
stylus
touch screen
super loud speaker
512mb micro sd card
and two 2200 mah lipo batt
tip top condition, bought at 1k
Tech Adept
iTrader: (10)
hi all,
ive got rc stuff for sale...mari mari mari...
1.brand new yokomo toyota chaser bodyshell,200mm...precut,prepaint,no holes,original yokomo light bucket given and wing as well...[rm180]
2.yeah racing lipo batt...[rm100]
3.1 set novak gtb+velocity 3.5 motor-rm650+10 postage
(pic will upload later)
IF INTERESTED PLS PM OR CALL ME WANDI-0168523700,ALL ITEM ARE IN GOOD CONDITION AND POSTAGE ARE FREE!!!!!
thkz for viewing....
new update...mari...mari...mari....
ive got rc stuff for sale...mari mari mari...
1.brand new yokomo toyota chaser bodyshell,200mm...precut,prepaint,no holes,original yokomo light bucket given and wing as well...[rm180]
2.yeah racing lipo batt...[rm100]
3.1 set novak gtb+velocity 3.5 motor-rm650+10 postage
(pic will upload later)
IF INTERESTED PLS PM OR CALL ME WANDI-0168523700,ALL ITEM ARE IN GOOD CONDITION AND POSTAGE ARE FREE!!!!!
thkz for viewing....
new update...mari...mari...mari....
SOLD to AimanXT delivery in progress.
Tech Elite
iTrader: (16)
Item : Ko Propo 2511ICS Digital High Speed Low profile servo (metal gear)
Condition : 10/10
Spec:
VOLTAGE: 6V
TORQUE: 132.5 oz
SPEED: 0.13 S @ 60°
BEARINGS: YES, DBL
LEAD CONNECTOR: GOLD PLATED
GEARS: METAL
WEIGHT: 46.5 g
SIZE: 41x21x31.8 mm
Price: rm220 with shipping
Reason for sell : no more track to play....
pm or sms me at 0168362899
Ko Propo Servo
No booking unless payment/deposit hv been made... 1st come 1st serve
thanks
Condition : 10/10
Spec:
VOLTAGE: 6V
TORQUE: 132.5 oz
SPEED: 0.13 S @ 60°
BEARINGS: YES, DBL
LEAD CONNECTOR: GOLD PLATED
GEARS: METAL
WEIGHT: 46.5 g
SIZE: 41x21x31.8 mm
Price: rm220 with shipping
Reason for sell : no more track to play....
pm or sms me at 0168362899
Ko Propo Servo
No booking unless payment/deposit hv been made... 1st come 1st serve
thanks
Updated: Special Edition Custom built upgraded Carbon NRX-18 Kit
--------------------------------------------------------------------------
I'm selling Full performance upgrade plus Carbon NRX18 with customized kit.
The most detailed 1/18 ever made.
-Superb condition.
-NRX-18 upgraded carbon chassis (lower chassis protected with thin fabric tape)
-Full alloy metal dogbone/wheel drive shaft.
-HBX ball sleeved with adjustable "A" wishbone suspension.
-HBX precision perfect no binding gear.
-Alloy spacer "O" ring below the bulk head.
-HPI wheels and tyre (BBS wheels style) Original white and gold wheels.
-Special made 1/18 wheel hub to fit any HPI wheel set.
-High detailed HPI Micro RS4 Corvette bodyshell 150mm. (properly built)
-Durable HBX 4 orbit gear differential
-Alloy shell tower and motor holder
-Fully bearings chassis.
-comes with manual book
-Plus extra spare parts (spare stock chassis, bulk heads, "A" wishbone suspension set" , shocks/spring, extra stock chassis deck upper and lower, pinion gears, ball bearings, dogbones/wheel shafts, wheel knuckle and steering, HPI wheels)
**The front carbon chassis got this edge chipped off near the screw that holds the bumper, minor problem and its normal.
**Remember this is only kit with transmitter as shown in the picture.
Selling for funding on 1/18 off-road.
Price: RM350 (ultra cheap..my lost is your gain) (can nego)
Delivery: By postlaju.
Item location: Miri/Sarawak
SMS me: 019-8895987 (David L.)
Photo:
--------------------------------------------------------------------------
I'm selling Full performance upgrade plus Carbon NRX18 with customized kit.
The most detailed 1/18 ever made.
-Superb condition.
-NRX-18 upgraded carbon chassis (lower chassis protected with thin fabric tape)
-Full alloy metal dogbone/wheel drive shaft.
-HBX ball sleeved with adjustable "A" wishbone suspension.
-HBX precision perfect no binding gear.
-Alloy spacer "O" ring below the bulk head.
-HPI wheels and tyre (BBS wheels style) Original white and gold wheels.
-Special made 1/18 wheel hub to fit any HPI wheel set.
-High detailed HPI Micro RS4 Corvette bodyshell 150mm. (properly built)
-Durable HBX 4 orbit gear differential
-Alloy shell tower and motor holder
-Fully bearings chassis.
-comes with manual book
-Plus extra spare parts (spare stock chassis, bulk heads, "A" wishbone suspension set" , shocks/spring, extra stock chassis deck upper and lower, pinion gears, ball bearings, dogbones/wheel shafts, wheel knuckle and steering, HPI wheels)
**The front carbon chassis got this edge chipped off near the screw that holds the bumper, minor problem and its normal.
**Remember this is only kit with transmitter as shown in the picture.
Selling for funding on 1/18 off-road.
Price: RM350 (ultra cheap..my lost is your gain) (can nego)
Delivery: By postlaju.
Item location: Miri/Sarawak
SMS me: 019-8895987 (David L.)
Photo:
Item : Tekin Brushless Motor 3.5T
Description : In good condition.
Price: RM200 (price reduce)
Item : Rims and tires set 2 with Tamiya Drift Tech tire
Description : 5/10
Reason : Funding for upgrade
Prise : RM50
Item : Rims and tires set 3 without tire
Description : 5/10
Reason : Funding for upgrade
Prise : RM20
PS : set 2 dn 3 still available
PM, SMS or call me Patrick 012-2918636
Description : In good condition.
Price: RM200 (price reduce)
Item : Rims and tires set 2 with Tamiya Drift Tech tire
Description : 5/10
Reason : Funding for upgrade
Prise : RM50
Item : Rims and tires set 3 without tire
Description : 5/10
Reason : Funding for upgrade
Prise : RM20
PS : set 2 dn 3 still available
PM, SMS or call me Patrick 012-2918636
New In Box XERUN Sensored brushless ESC - FAST!!
XERUN V2 120A brushless esc.
New In Box - Unopened
Price = RM550 (prefer COD, if insist on poslaju, you have to indemnify me against any claims should it get lost in transit)
Specification
Output: Continuous current 120A, burst current 760A.
Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
BEC Output: 5.75V@3A linear mode built-in BEC.
Resistance: 0.0003 Ohm.
Motor Supported: Sensored brushless / Sensorless Brushless.
Suitable Brushless Motor:
With 2 cells Lipo or 4-6 cells NiMH, 1/10 on-road: >=3.5T, 1/10 off-road: >=5.5T
With 3 cells Lipo or 7-9 cells NiMH, 1/10 on-road: >=5.5T, 1/10 off-road: >=8.5T
Size: 43mm(L) * 36mm(W) * 33mm(H).
Weight: 65g(Without wires)
Included:
12 awg wires pre-soldered, without connectors.
Heatsink cooling fan
Power capacitors
I currently have this esc in my touring car with SP 11.5t and its faster with more punch than my SP GT ESC on the same gear ratio.
Reason for selling:
Bought 2 units, 1 for my friend but he ffk
PM me if interested. Thanks.
Team Orion Vortex Race Spec BL ESC
Hi all,
For Sell ( Team Orion Vortex Race Spec BL ESC )
Condition 8.5/10 And Box & Manual ($750.00)
To Deal (PLS) PM ME TQ .
For Sell ( Team Orion Vortex Race Spec BL ESC )
Condition 8.5/10 And Box & Manual ($750.00)
To Deal (PLS) PM ME TQ .
Tech Champion
iTrader: (10)
Some Good 2nd Hand Stuff For Sale At RC Pitstop 1 Utama:-
- Pulsar 2 Competition Chargers from RM400
- ICE Charger RM400
- Much More CTX-D2 Discharger RM400
- Discharging Trays RM80
- LRP Power Supply RM200
- Novak Velocity 3.5 Brushless Motor RM200
- 1/10 and 1/8 Exhaust Pipes from RM80 to RM180
- Matrix Sponge Tires
- Buggy Tyres on Rims
- Werks B7 Buggy Engine with In-Line Pipe RM500
- Andy Dass's RB C5 Engine RM600
- Storm RTR+ buggy RM700
- XUT Pro Kit only RM500
- Caster Pro Buggy Kit only RM450
- GS StarterBox RM180
- GS CL1 Pro Kit RM700
- Xray M18 Pro with battery and ESC RM800
- Cen Genesis GST7.7 RM2000
PM or SMS me if interested. All in good condition.
- Pulsar 2 Competition Chargers from RM400
- ICE Charger RM400
- Much More CTX-D2 Discharger RM400
- Discharging Trays RM80
- LRP Power Supply RM200
- Novak Velocity 3.5 Brushless Motor RM200
- 1/10 and 1/8 Exhaust Pipes from RM80 to RM180
- Matrix Sponge Tires
- Buggy Tyres on Rims
- Werks B7 Buggy Engine with In-Line Pipe RM500
- Andy Dass's RB C5 Engine RM600
- Storm RTR+ buggy RM700
- XUT Pro Kit only RM500
- Caster Pro Buggy Kit only RM450
- GS StarterBox RM180
- GS CL1 Pro Kit RM700
- Xray M18 Pro with battery and ESC RM800
- Cen Genesis GST7.7 RM2000
PM or SMS me if interested. All in good condition.
kyosho fw06
Hello rctech peeps ,
I'm letting go of my beloved Kyosho FW-06, Well taken care of, since its my only car. Engine changed to OFNA Hyper 12 ( NEW , Compression 9.5/10, Completed break in process already and ran few laps). Clutch is KYOSHO Original 3D Centax clutch, adjustable, Bought it when i bought engine.
Items :
1. Kyosho FW-06 KIT only, RM 450, Comes with Kyosho 3d Clutch assembly set.
2. OFNA Hyper 12 engine, its a .12 engine, Non-turbo. Will include spare os8 plug, Compression 9.5/10. Just broke in engine with 25% sidewinder fuel. RM 250.
3. Glow plug heater, Sanyo. 1600mAh. RM 40 with charger. ( condition 6/10 , scratches on battery , nitro ran over it during race.)
4. Intellect Receiver pack. 1600mAh, RM 40 include charger.
5. GRP Foam REAR 40 , RM 40. performance still perfect.
6. Hitec HS645MG servo, RM 110. scratches on shell, performance still perfect.
7. FUTABA S3003 servo RM 30.
8. KYOSHO KT3-HS, Receiver and transmitter, 26.xxx , RM 100. Great working condition.
Condition of chassis : Bottom part had aluminium tape on it, but now only some is left, so it may look like its scratched, but actually bits of the alu tape still on it.. can peel off, some scratches at side of chassis. no dents/ bents..
Finally, Take all items, RTR ( Includes 1 Gallon almost full SIDEWINDER 25% Fuel, used about 300ML. Fuel bottle will be included ( But i sealed it due to leak, works fine now). TAKE ALL FOR RM 900 (NEGO).
Prices do not include postage fees, Items are in MIRI,Sarawak.COD is recommended. but postal can be arranged.
PM me for pictures.
Interested parties may PM me , or SMS me at 0165790805.
Rough pictures of my car.
I am truly sorry if this pictures are too big. I've tried uploading through rctech, but everytime i quote it, it will disappear.
P.S : Fuel will not be included if sent VIA postage. Will lower price for that.
I'm letting go of my beloved Kyosho FW-06, Well taken care of, since its my only car. Engine changed to OFNA Hyper 12 ( NEW , Compression 9.5/10, Completed break in process already and ran few laps). Clutch is KYOSHO Original 3D Centax clutch, adjustable, Bought it when i bought engine.
Items :
1. Kyosho FW-06 KIT only, RM 450, Comes with Kyosho 3d Clutch assembly set.
2. OFNA Hyper 12 engine, its a .12 engine, Non-turbo. Will include spare os8 plug, Compression 9.5/10. Just broke in engine with 25% sidewinder fuel. RM 250.
3. Glow plug heater, Sanyo. 1600mAh. RM 40 with charger. ( condition 6/10 , scratches on battery , nitro ran over it during race.)
4. Intellect Receiver pack. 1600mAh, RM 40 include charger.
5. GRP Foam REAR 40 , RM 40. performance still perfect.
6. Hitec HS645MG servo, RM 110. scratches on shell, performance still perfect.
7. FUTABA S3003 servo RM 30.
8. KYOSHO KT3-HS, Receiver and transmitter, 26.xxx , RM 100. Great working condition.
Condition of chassis : Bottom part had aluminium tape on it, but now only some is left, so it may look like its scratched, but actually bits of the alu tape still on it.. can peel off, some scratches at side of chassis. no dents/ bents..
Finally, Take all items, RTR ( Includes 1 Gallon almost full SIDEWINDER 25% Fuel, used about 300ML. Fuel bottle will be included ( But i sealed it due to leak, works fine now). TAKE ALL FOR RM 900 (NEGO).
Prices do not include postage fees, Items are in MIRI,Sarawak.COD is recommended. but postal can be arranged.
PM me for pictures.
Interested parties may PM me , or SMS me at 0165790805.
Rough pictures of my car.
I am truly sorry if this pictures are too big. I've tried uploading through rctech, but everytime i quote it, it will disappear.
P.S : Fuel will not be included if sent VIA postage. Will lower price for that.
The New Spektrum DX3S 3-Channel DSM Radio
Products
DX3S 3 Channel DSM Surface Radio with Telemetry
SR3300T DSM 3CH Rx w/ Telemetry
SR300 3Channel DSM Sport Surface Receiver
M6 LiPro Balance Charger by MARCO POWER
Specifications
Operating voltage range:
DC 11.0-18.0 Volt
AC to DC adaptor (DC11.1-18.0/5A)
Circuit Power:
Max.charge power 50W
Max.dicharge power 5W
Charge cirrent range: 0.1-5.0A
0.1-5.0A
Dichargecurrent range: 0.1-1.0A
Current drain for balancing Li-po: 300mAh/cell
NiCd/N/MH battery cell count: 1-15cell
Li-ion/Polymer cell count: 1-6 series
Pb batteryvoltage: 2V-20V
Weight: 370g(Net Weight)
Dimensions: 134x95x22mm
Power Suply
Input : 100-240V ~
50 / 60Hz 1.5A
Output : 12V...5A MAX
Hobby Tech HBS-9 Servo
Digital Proportional Radio Control System,FM Transmitter HBS-9KG and HBS-3KG Servo
SH PT2009-XB 21 COMPETITION OFF ROAD Engine
Ceramic Coated Piston& Crankshaft
SH Body Reamer
SH Clutch Mounting Tool
Ballhead Screwdriver 2.0mm
Ballhead Screwdriver 2.5mm
Ballhead Screwdriver 3.0mm
Nuthead Screwdriver 1.5mm
Nuthead Screwdriver 2.0mm
Nuthead Screwdriver 2.5mm
Nuthead Screwdriver 3.0mm
Standard Screwdriver 4.0mm
Standard Screwdriver 5.0mm
Standard Screwdriver 5.8mm
Cross Screwdriver 4.5mm
Cross Screwdriver 5.5mm
Cross Screwdriver 7.0mm
Philips Screwdriver 3.5mm
Philips Screwdriver 4.0mm
Philips Screwdriver 5.0mm
Philips Screwdriver 5.8mm
Engine with Bearing Extractor
APLUS 1/10 ON Road
APLUS 1/8 Buggy and Truggy
JAMMIN products has arrive. Please do not pm or sms as it will not be entertain. Only will entertain calls and shop visit.
016-2216319
Craft-RC Decal for Spektrum DX3 , Futaba 4PK , Sanwa M11 , KO Mars & EX1-UR
Futaba 4PK
Sanwa M11
Spektrum DX3
KO Mars & EX1-UR
JP FX 21B-8T, FX 21B-8N Ceramic Bearing Engine
DX3R Wheel set and DX3S Wheel set
Power Stering Option 50mm for DX3R and Dx3S
Spektrum Reciever SR3100
Pls visit us website for products of RB Engine and other
http://www.lkhmodelsports.350.com
Products
DX3S 3 Channel DSM Surface Radio with Telemetry
SR3300T DSM 3CH Rx w/ Telemetry
SR300 3Channel DSM Sport Surface Receiver
M6 LiPro Balance Charger by MARCO POWER
Specifications
Operating voltage range:
DC 11.0-18.0 Volt
AC to DC adaptor (DC11.1-18.0/5A)
Circuit Power:
Max.charge power 50W
Max.dicharge power 5W
Charge cirrent range: 0.1-5.0A
0.1-5.0A
Dichargecurrent range: 0.1-1.0A
Current drain for balancing Li-po: 300mAh/cell
NiCd/N/MH battery cell count: 1-15cell
Li-ion/Polymer cell count: 1-6 series
Pb batteryvoltage: 2V-20V
Weight: 370g(Net Weight)
Dimensions: 134x95x22mm
Power Suply
Input : 100-240V ~
50 / 60Hz 1.5A
Output : 12V...5A MAX
Hobby Tech HBS-9 Servo
Digital Proportional Radio Control System,FM Transmitter HBS-9KG and HBS-3KG Servo
SH PT2009-XB 21 COMPETITION OFF ROAD Engine
Ceramic Coated Piston& Crankshaft
SH Body Reamer
SH Clutch Mounting Tool
Ballhead Screwdriver 2.0mm
Ballhead Screwdriver 2.5mm
Ballhead Screwdriver 3.0mm
Nuthead Screwdriver 1.5mm
Nuthead Screwdriver 2.0mm
Nuthead Screwdriver 2.5mm
Nuthead Screwdriver 3.0mm
Standard Screwdriver 4.0mm
Standard Screwdriver 5.0mm
Standard Screwdriver 5.8mm
Cross Screwdriver 4.5mm
Cross Screwdriver 5.5mm
Cross Screwdriver 7.0mm
Philips Screwdriver 3.5mm
Philips Screwdriver 4.0mm
Philips Screwdriver 5.0mm
Philips Screwdriver 5.8mm
Engine with Bearing Extractor
APLUS 1/10 ON Road
APLUS 1/8 Buggy and Truggy
JAMMIN products has arrive. Please do not pm or sms as it will not be entertain. Only will entertain calls and shop visit.
016-2216319
Craft-RC Decal for Spektrum DX3 , Futaba 4PK , Sanwa M11 , KO Mars & EX1-UR
Futaba 4PK
Sanwa M11
Spektrum DX3
KO Mars & EX1-UR
JP FX 21B-8T, FX 21B-8N Ceramic Bearing Engine
DX3R Wheel set and DX3S Wheel set
Power Stering Option 50mm for DX3R and Dx3S
Spektrum Reciever SR3100
Pls visit us website for products of RB Engine and other
http://www.lkhmodelsports.350.com
Tech Adept
iTrader: (16)
1. Item Description: Tamiya TT01E Original Servo ( TSU-01 )
Used or New : used
Condition & Age : 9/10
Price : RM50
Negotiable : Y
Reason for sell : Funding
Location :Klang / PJ
Mode of Delivery: COD /POS LAJU
Notes : Use 2 times only.
2.Item Description: Sanwa SRM-102 Servo
Used or New : New
Condition & Age : 10/10
Price : RM100 each ( 2 pcs available )
Negotiable : Y
Reason for sell : Funding
Location :Klang / PJ
Mode of Delivery: COD /POS LAJU
3.Item Description: Tamiya Expec TTU-03 Transmitter
Used or New : Used
Condition & Age : 9/10
Price : RM100
Negotiable : Y
Reason for sell : Funding
Location :Klang / PJ
Mode of Delivery: COD /POS LAJU
Notes :Use 2 times only. ( Very minimum scratches )
Pls SMS or Call 012-3885853 / 016-3385853
Used or New : used
Condition & Age : 9/10
Price : RM50
Negotiable : Y
Reason for sell : Funding
Location :Klang / PJ
Mode of Delivery: COD /POS LAJU
Notes : Use 2 times only.
2.Item Description: Sanwa SRM-102 Servo
Used or New : New
Condition & Age : 10/10
Price : RM100 each ( 2 pcs available )
Negotiable : Y
Reason for sell : Funding
Location :Klang / PJ
Mode of Delivery: COD /POS LAJU
3.Item Description: Tamiya Expec TTU-03 Transmitter
Used or New : Used
Condition & Age : 9/10
Price : RM100
Negotiable : Y
Reason for sell : Funding
Location :Klang / PJ
Mode of Delivery: COD /POS LAJU
Notes :Use 2 times only. ( Very minimum scratches )
Pls SMS or Call 012-3885853 / 016-3385853