RC equipments for Sale
Tech Adept
iTrader: (10)
![Thumbs up](https://www.rctech.net/forum/images/icons/icon14.gif)
1.Item Description: Kyosho Fazer (without servo,tayar,bodyshell,rx n tx)spare part yg aku ada juga akan diberi sekali.
Used or New : used
Condition & Age : 7/10(enjin ok)
Price : RM300
Negotiable :
Reason for sell : clear barang dalam bilik
Location :PARIT BUNTAR,PERAK
Mode of Delivery: COD /POS LAJU
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01665.jpg)
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01666.jpg)
2.Item Description: TT 01E chasis (receiver xda) original part yg dah ditukar juga akan diberi.bodyshell subaru impreza juga diberi
Used or New : used
Condition & Age : 9/10
Price : RM700
Negotiable :
Reason for sell : clear barang dalam bilik
Location :PARIT BUNTAR,PERAK
Mode of Delivery: COD /POS LAJU
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01679.jpg)
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01679.jpg)
3.Item Description: Hotwork rim n drift tyre
Used or New : new
Condition & Age : 10/10 xpenah guna
Price : RM100
Negotiable :
Reason for sell : clear barang dalam bilik
Location :PARIT BUNTAR,PERAK
Mode of Delivery: COD /POS LAJU
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01674.jpg)
4.Item Description: Yokomo 23t brush motor
Used or New : used
Condition & Age : 8.5/10(guna beberapa kali then tuko BL)
Price : RM100
Negotiable :
Reason for sell : clear barang dalam bilik
Location :PARIT BUNTAR,PERAK
Mode of Delivery: COD /POS LAJU
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01676.jpg)
5.Item Description: YOKO Lipo 4000mah 11.1v
Used or New : used
Condition & Age : 8/10 beli dari member,tp xpenah guna coz xda esc yg sesuai
Price : RM200
Negotiable :
Reason for sell : clear barang dalam bilik
Location :PARIT BUNTAR,PERAK
Mode of Delivery: COD /POS LAJU
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01673.jpg)
6.Item Description: battery 4700mah
Used or New : used
Condition & Age : 8/10 guna hanya beberapa kali then tuko LIPO
Price : item booked
Negotiable :
Reason for sell : clear barang dalam bilik
Location :PARIT BUNTAR,PERAK
Mode of Delivery: COD /POS LAJU
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01678.jpg)
7.Item Description: Orca 9.5t 4000kv combo set
Used or New : used
Condition & Age : 8/10
Price : RM300
Negotiable :
Reason for sell : clear barang dalam bilik
Location :PARIT BUNTAR,PERAK
Mode of Delivery: COD /POS LAJU
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01681.jpg)
beli item combo 2+3+4+5+6= RM1000shj
bleh pm aku atau contact 0124242534 shahril
terima kasih
Used or New : used
Condition & Age : 7/10(enjin ok)
Price : RM300
Negotiable :
Reason for sell : clear barang dalam bilik
Location :PARIT BUNTAR,PERAK
Mode of Delivery: COD /POS LAJU
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01665.jpg)
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01666.jpg)
2.Item Description: TT 01E chasis (receiver xda) original part yg dah ditukar juga akan diberi.bodyshell subaru impreza juga diberi
Used or New : used
Condition & Age : 9/10
Price : RM700
Negotiable :
Reason for sell : clear barang dalam bilik
Location :PARIT BUNTAR,PERAK
Mode of Delivery: COD /POS LAJU
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01679.jpg)
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01679.jpg)
3.Item Description: Hotwork rim n drift tyre
Used or New : new
Condition & Age : 10/10 xpenah guna
Price : RM100
Negotiable :
Reason for sell : clear barang dalam bilik
Location :PARIT BUNTAR,PERAK
Mode of Delivery: COD /POS LAJU
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01674.jpg)
4.Item Description: Yokomo 23t brush motor
Used or New : used
Condition & Age : 8.5/10(guna beberapa kali then tuko BL)
Price : RM100
Negotiable :
Reason for sell : clear barang dalam bilik
Location :PARIT BUNTAR,PERAK
Mode of Delivery: COD /POS LAJU
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01676.jpg)
5.Item Description: YOKO Lipo 4000mah 11.1v
Used or New : used
Condition & Age : 8/10 beli dari member,tp xpenah guna coz xda esc yg sesuai
Price : RM200
Negotiable :
Reason for sell : clear barang dalam bilik
Location :PARIT BUNTAR,PERAK
Mode of Delivery: COD /POS LAJU
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01673.jpg)
6.Item Description: battery 4700mah
Used or New : used
Condition & Age : 8/10 guna hanya beberapa kali then tuko LIPO
Price : item booked
Negotiable :
Reason for sell : clear barang dalam bilik
Location :PARIT BUNTAR,PERAK
Mode of Delivery: COD /POS LAJU
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01678.jpg)
7.Item Description: Orca 9.5t 4000kv combo set
Used or New : used
Condition & Age : 8/10
Price : RM300
Negotiable :
Reason for sell : clear barang dalam bilik
Location :PARIT BUNTAR,PERAK
Mode of Delivery: COD /POS LAJU
![](http://i730.photobucket.com/albums/ww303/djaya/DSC01681.jpg)
beli item combo 2+3+4+5+6= RM1000shj
bleh pm aku atau contact 0124242534 shahril
terima kasih
![Smilie](https://www.rctech.net/forum/classic_images/smilies/smile.gif)
![djaya is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Hello rctech peeps ,
I'm letting go of my beloved Kyosho FW-06, Well taken care of, since its my only car. Engine changed to OFNA Hyper 12 ( NEW , Compression 9.5/10, Completed break in process already and ran few laps). Clutch is KYOSHO Original 3D Centax clutch, adjustable, Bought it when i bought engine.
Items :
1. Kyosho FW-06 KIT only, RM 450, Comes with Kyosho 3d Clutch assembly set.
2. OFNA Hyper 12 engine, its a .12 engine, Non-turbo. Will include spare os8 plug, Compression 9.5/10. Just broke in engine with 25% sidewinder fuel. RM 250.
3. Glow plug heater, Sanyo. 1600mAh. RM 40 with charger. ( condition 6/10 , scratches on battery , nitro ran over it during race.)
4. Intellect Receiver pack. 1600mAh, RM 40 include charger.
5. GRP Foam REAR 40 , RM 40. performance still perfect.
6. Hitec HS645MG servo, RM 110. scratches on shell, performance still perfect.
7. FUTABA S3003 servo RM 30.
8. KYOSHO KT3-HS, Receiver and transmitter, 26.xxx , RM 100. Great working condition.
Condition of chassis : Bottom part had aluminium tape on it, but now only some is left, so it may look like its scratched, but actually bits of the alu tape still on it.. can peel off, some scratches at side of chassis. no dents/ bents..
Finally, Take all items, RTR ( Includes 1 Gallon almost full SIDEWINDER 25% Fuel, used about 300ML. Fuel bottle will be included ( But i sealed it due to leak, works fine now). TAKE ALL FOR RM 900 (NEGO).
Prices do not include postage fees, Items are in MIRI,Sarawak.COD is recommended. but postal can be arranged.
PM me for pictures.
Interested parties may PM me , or SMS me at 0165790805.
Rough pictures of my car.
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01164.jpg)
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01165.jpg)
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01166.jpg)
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01167.jpg)
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01168.jpg)
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01141.jpg)
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01132.jpg)
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01115.jpg)
I am truly sorry if this pictures are too big. I've tried uploading through rctech, but everytime i quote it, it will disappear.![blushing](https://www.rctech.net/forum/classic_images/smilies/blush.gif)
P.S : Fuel will not be included if sent VIA postage. Will lower price for that.
I'm letting go of my beloved Kyosho FW-06, Well taken care of, since its my only car. Engine changed to OFNA Hyper 12 ( NEW , Compression 9.5/10, Completed break in process already and ran few laps). Clutch is KYOSHO Original 3D Centax clutch, adjustable, Bought it when i bought engine.
Items :
1. Kyosho FW-06 KIT only, RM 450, Comes with Kyosho 3d Clutch assembly set.
2. OFNA Hyper 12 engine, its a .12 engine, Non-turbo. Will include spare os8 plug, Compression 9.5/10. Just broke in engine with 25% sidewinder fuel. RM 250.
3. Glow plug heater, Sanyo. 1600mAh. RM 40 with charger. ( condition 6/10 , scratches on battery , nitro ran over it during race.)
4. Intellect Receiver pack. 1600mAh, RM 40 include charger.
5. GRP Foam REAR 40 , RM 40. performance still perfect.
6. Hitec HS645MG servo, RM 110. scratches on shell, performance still perfect.
7. FUTABA S3003 servo RM 30.
8. KYOSHO KT3-HS, Receiver and transmitter, 26.xxx , RM 100. Great working condition.
Condition of chassis : Bottom part had aluminium tape on it, but now only some is left, so it may look like its scratched, but actually bits of the alu tape still on it.. can peel off, some scratches at side of chassis. no dents/ bents..
Finally, Take all items, RTR ( Includes 1 Gallon almost full SIDEWINDER 25% Fuel, used about 300ML. Fuel bottle will be included ( But i sealed it due to leak, works fine now). TAKE ALL FOR RM 900 (NEGO).
Prices do not include postage fees, Items are in MIRI,Sarawak.COD is recommended. but postal can be arranged.
PM me for pictures.
Interested parties may PM me , or SMS me at 0165790805.
Rough pictures of my car.
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01164.jpg)
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01165.jpg)
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01166.jpg)
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01167.jpg)
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01168.jpg)
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01141.jpg)
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01132.jpg)
![](http://img.photobucket.com/albums/v508/jedi_dc/DSC01115.jpg)
I am truly sorry if this pictures are too big. I've tried uploading through rctech, but everytime i quote it, it will disappear.
![blushing](https://www.rctech.net/forum/classic_images/smilies/blush.gif)
P.S : Fuel will not be included if sent VIA postage. Will lower price for that.
![Smilie](https://www.rctech.net/forum/classic_images/smilies/smile.gif)
![akiraceo is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
Tech Addict
iTrader: (12)
![Thumbs up](https://www.rctech.net/forum/images/icons/icon14.gif)
Hello, selling my Team Magic G4S Pro Kit Fully
Hopup. package also include Sanwa MX-3 FHSS 2.4
Spectrum, a lot of NIP parts & used included
for the package.
chassis spec: SOLD to kedah4mm lightweight chassis, carbon front upper
bumper, carbon servo plate, carbon transponder
holder, carbon front X, carbon front shock tower,
carbon rear shock tower, carbon rear bulkhead
mount, aluminium rear shock stiffner, aluminium
brake lever, aluminium servo mount, aluminium
adjustable damper, aluminium steering anchorman,
aluminium pulley all around, front one way / solid
axle, front and rear stabilizer bar with aluminium
bracket, aluminium middle pulley mount, aluminium
hex wheel clamp.
engine spec: pRICE DROP TO RM 250
RB Rudy tuned 3 port turbo c/w RB manifold and
pipe. condition 7/10
servo spec: asking RM 300 for 2 unit
Caster racing C-9850 9KG servo for throttle
spec 4.8 volts 111.0 oz-in. torque 0.15 sec/60 speed
spec 6.0 volts 138.8 oz-in. torque 0.12 sec/60 speed
Caster racing C-9851 13KG servo for steering
spec 4.8 volts 108.0 oz-in. torque 0.14 sec/60 speed
spec 6.0 volts 136.6 oz-in. torque 0.11 sec/60 speed
remote spec: SOLD to miri
Sanwa MX-3 FHSS 2.4 Ghz spread spectrum with
receiver.
Loose parts: SOLD to kedahwhat you see in the pic is what u get
actually....there are some used tyre as well will
be given, bend pipe, wrench, shock oil, spring,
spare 4mm chassis, bla bla bla..... you see for
yourself.
manual and original box will be given also. only
remote box and manual already misplaced.
everything in running condition. Price not
negotiable. if you know the math. try count it.
![](http://i282.photobucket.com/albums/kk256/evoton/Image1261.jpg)
![](http://i282.photobucket.com/albums/kk256/evoton/Image1263.jpg)
Lai Lai Lai, Got a lot of unused item to let go asf: ALL PRICE REVISED
1. NIB = MP 777 Special Radio Carbon Plate Set ( k-factory ) Rm 100 got 3 sets
![](http://i282.photobucket.com/albums/kk256/evoton/Image952800x600.jpg)
2. NIB = Hard Tire Truer Turbo Cutter ( 2 diffrent cutters ) Rm 35 got 13 sets
![](http://i282.photobucket.com/albums/kk256/evoton/Image953800x600.jpg)
3. NIB = Hard Coated Push Type Clutch Nut Driver 10mm ( Team Magic ) Rm 15 got 12 sets ( sold 3 sets )
![](http://i282.photobucket.com/albums/kk256/evoton/Image954800x600.jpg)
4. NIB = Black Hard Coated Metric Ball Stud Nut Driver 5mm ( Team Magic ) Rm 15 got 4 sets ( sold 2 sets )
![](http://i282.photobucket.com/albums/kk256/evoton/Image955800x600.jpg)
------------------------------------------------------------------------------------------------------------------------
Hello Rc fans, any1
ing for Team Magic M1B Buggy parts?? i have some parts willing to let go
for a reasonable price
. pic upon request. Too many item to list out the pic. thanks...![Rotating Tire](https://www.rctech.net/forum/classic_images/smilies/tire.gif)
![Rotating Tire](https://www.rctech.net/forum/classic_images/smilies/tire.gif)
Parts no. Item name Unit
561001 front/rear differential set ( 1 set ) 7 pkt
561002 middle differential set ( 1 set ) 4 pkt
560116 hard anodinized alu anti-roll bar ball stud 3 pkt
560202 shock bladder 4 pkt
560157 st steel 3.5x43.5mm hinge pin ( for rear outside lower ) (2) 2 pkt
560182 clutch flywheel, collect & clutch nut ( for SG shaft ) 2 pkt
560163 brake lever set 5 pkt
111104 5x34mm post (1) & reduction gear set 1 pkt
560174 body mount set 1 pkt
560164 hard coated 7075 alu brake cam post & cam ( 2pcs/each ) 4 pkt
560192 shock 0-ring & washer ( 4pcs/each ) 11 pkt
560531 front anti-roll bar 2.5mm blue 2 pkt
560185 one-piece engine mount 2 pkt
560189 st steel 4x49.4.. front shock shaft ( 2 ) 7 pkt
560183 receiver battery pack mount 3 pkt
560144 14mm pivot ball, pivot ball spacer & nut ( 2 ) 3 pkt
560115 small bevel gear 13t 6 pkt
560129 st steel 3.5x41.5mm hinge pin ( for front upper/outside lower ) 2 pkt
560193 shock end cap set ( 2 ) 3 pkt
560176 carbon radio plate 1 pkt
560507 7075 alu rear lower rear ( 2.5 & 3.5 toe degree ) Hinge pin plate 5 pkt
560506 7075 alu rear lower rear ( 3 & 4 toe degree ) Hinge pin plate 1 pkt
560150 7075 alu rear lower front ( 1 & 2 anti-squat degree ) Hinge pin plate 4 pkt
560131 7075 alu front lower front hinge pin plate 9 pkt
560501 7075 alu rear lower front ( 1.5 & 2.5 anti-squat degree ) 5 pkt
560505 7075ali rear lower rear ( 1.5 & 2.5 toe degree ) Hinge pin plate 3 pkt
560181 alu radio plate support set 4 pkt
560168 servo saver set 2 pkt
560180 throttle servo linkage set 9 pkt
560109 front upper arm mount ( L & R ) 2 pkt
560201 alu shock cap 4 pkt
560196 hard coated front shock body 5 pkt
560204 shock spring holder & spacer set 3 pkt
560133 front upper flying wing arm ( nylon part only ) 1 pair 8 pkt
560169 st steel centre differential outdrive ( 2 ) 9 pkt
560211 front shock upper protective mount 3 pkt
560109 front upper arm mount ( L & R ) 3 pkt
560175 receiver battery pack box 2 pkt
560171 servo saver post set 3 pkt
560197 shock ball end & hardware set ( 2 ) 9 pkt
560152 rear hub carrier & mud sweeper ( 1 pair ) 6 pkt
560148 rear wing mount & holding set 3 pkt
560132 front & rear nylon bumper 6 pkt
560173 servo saver holder & front cushion stiffener set 2 pkt
560120 hinge pin nylon cap & adjuster set 4 pkt
560165 centre differential mount ( 1 set ) 2 pkt
560146 rear upper arm ( 2 ) 2 pkt
560121 St steel front/rear universal joint ( 2 ) 6 pkt
560101 st steel front/rear differential outdrive ( 2 ) 6 pkt
560122 7075 alu steering block ( 1 pair ) 4 pkt
560106 large bevel gear 43t 2 pkt
560170 steering rod nylon ball end set 13 pkt
560195 shock dust-resistant wiper ( 4 ) 17 pkt
560103 differential case gasket 3 pkt
560172 hard coated 7075 alu servo saver linkage plate set 2 pkt
560102 diff case set 5 pkt
560143 rear upper arm mount ( L & R ) 2 pkt
560124 steering block carrier ( 1 pair ) 4 pkt
560162 46t main gear 2 pkt
560147 rear gear box ( 1 set ) 1 pkt
560135 st steel 3.5x26mm hinge pin ( for front outside upper ) ( 2 ) 4 pkt
560139 chassis guard & stiffener 3 pkt
560214 rear wing 5 pkt
560216 fuel tank 4 pkt
K6401-1 dual stage foam element ( 2 ) 7 pkt
K6501-14 k factory hd 1/8 buggy clutch housing 14t 1 pkt
K6451 buggy air filter oil ( 20 ml ) 6 pkt
560137 hard coated 3mm 7075 alu chassis & centre stiffener 4 pkt
Note: Item now at sarawak, all item NIP. Pm me for order parts or refer to http://www.rcshopping.com/index.jsp for parts number and pic![Big Grin](https://www.rctech.net/forum/classic_images/smilies/biggrin.gif)
![Big Grin](https://www.rctech.net/forum/classic_images/smilies/biggrin.gif)
![Big Grin](https://www.rctech.net/forum/classic_images/smilies/biggrin.gif)
i have some used item for sale, all item in best condition.
Item 1
Sanwa M11 with pro spectrum module, Craft Rc sticker, battery tray and 1 unit spectrum surface SR 3000 receiver. condition 8.5/10. PM me for price.
![](http://i282.photobucket.com/albums/kk256/evoton/Image1199.jpg)
![](http://i282.photobucket.com/albums/kk256/evoton/Image1201.jpg)
![](http://i282.photobucket.com/albums/kk256/evoton/Image1202.jpg)
Item 2
Robitronics Scalpel 1/18 2wd EP. come with Robitronics ori 300 motor, 1600 mah 4 pc batt, hitec HS-82MG steering servo. Bravo V16R digital ESC and Scalpel 1/18 bodyshell used. condition 9.5/10. PM me for price. if only interested in chassis only, price can be revised.
![](http://i282.photobucket.com/albums/kk256/evoton/Image1203.jpg)
![](http://i282.photobucket.com/albums/kk256/evoton/Image1206.jpg)
![](http://i282.photobucket.com/albums/kk256/evoton/Image1205.jpg)
![](http://i282.photobucket.com/albums/kk256/evoton/Image1208.jpg)
Item 3
GRP engine tuned by Mario Rossi. 21 on road promo kit. never race before. inculde with EFRA 2053 pipe and manifold. condition 9/10. PM me for price.
![](http://i282.photobucket.com/albums/kk256/evoton/Image1213.jpg)
or you can call/sms for item above at 016-8633013 for more detail. item at kuching. for outstation buyer, shipping charges will be bear by buyer. no bookings will be entertain unless paid. if buy more will pos-laju for free. Cepat Cepat SaPu or AnGkAt.....
Hopup. package also include Sanwa MX-3 FHSS 2.4
Spectrum, a lot of NIP parts & used included
for the package.
chassis spec: SOLD to kedah4mm lightweight chassis, carbon front upper
bumper, carbon servo plate, carbon transponder
holder, carbon front X, carbon front shock tower,
carbon rear shock tower, carbon rear bulkhead
mount, aluminium rear shock stiffner, aluminium
brake lever, aluminium servo mount, aluminium
adjustable damper, aluminium steering anchorman,
aluminium pulley all around, front one way / solid
axle, front and rear stabilizer bar with aluminium
bracket, aluminium middle pulley mount, aluminium
hex wheel clamp.
engine spec: pRICE DROP TO RM 250
RB Rudy tuned 3 port turbo c/w RB manifold and
pipe. condition 7/10
servo spec: asking RM 300 for 2 unit
Caster racing C-9850 9KG servo for throttle
spec 4.8 volts 111.0 oz-in. torque 0.15 sec/60 speed
spec 6.0 volts 138.8 oz-in. torque 0.12 sec/60 speed
Caster racing C-9851 13KG servo for steering
spec 4.8 volts 108.0 oz-in. torque 0.14 sec/60 speed
spec 6.0 volts 136.6 oz-in. torque 0.11 sec/60 speed
remote spec: SOLD to miri
Sanwa MX-3 FHSS 2.4 Ghz spread spectrum with
receiver.
Loose parts: SOLD to kedahwhat you see in the pic is what u get
actually....there are some used tyre as well will
be given, bend pipe, wrench, shock oil, spring,
spare 4mm chassis, bla bla bla..... you see for
yourself.
manual and original box will be given also. only
remote box and manual already misplaced.
everything in running condition. Price not
negotiable. if you know the math. try count it.
![](http://i282.photobucket.com/albums/kk256/evoton/Image1261.jpg)
![](http://i282.photobucket.com/albums/kk256/evoton/Image1263.jpg)
Lai Lai Lai, Got a lot of unused item to let go asf: ALL PRICE REVISED
1. NIB = MP 777 Special Radio Carbon Plate Set ( k-factory ) Rm 100 got 3 sets
![](http://i282.photobucket.com/albums/kk256/evoton/Image952800x600.jpg)
2. NIB = Hard Tire Truer Turbo Cutter ( 2 diffrent cutters ) Rm 35 got 13 sets
![](http://i282.photobucket.com/albums/kk256/evoton/Image953800x600.jpg)
3. NIB = Hard Coated Push Type Clutch Nut Driver 10mm ( Team Magic ) Rm 15 got 12 sets ( sold 3 sets )
![](http://i282.photobucket.com/albums/kk256/evoton/Image954800x600.jpg)
4. NIB = Black Hard Coated Metric Ball Stud Nut Driver 5mm ( Team Magic ) Rm 15 got 4 sets ( sold 2 sets )
![](http://i282.photobucket.com/albums/kk256/evoton/Image955800x600.jpg)
------------------------------------------------------------------------------------------------------------------------
Hello Rc fans, any1
![EEK!](https://www.rctech.net/forum/classic_images/smilies/eek.gif)
![Nodding](https://www.rctech.net/forum/classic_images/smilies/nod.gif)
![Laughing](https://www.rctech.net/forum/classic_images/smilies/laugh2.gif)
![Rotating Tire](https://www.rctech.net/forum/classic_images/smilies/tire.gif)
![Rotating Tire](https://www.rctech.net/forum/classic_images/smilies/tire.gif)
Parts no. Item name Unit
561001 front/rear differential set ( 1 set ) 7 pkt
561002 middle differential set ( 1 set ) 4 pkt
560116 hard anodinized alu anti-roll bar ball stud 3 pkt
560202 shock bladder 4 pkt
560157 st steel 3.5x43.5mm hinge pin ( for rear outside lower ) (2) 2 pkt
560182 clutch flywheel, collect & clutch nut ( for SG shaft ) 2 pkt
560163 brake lever set 5 pkt
111104 5x34mm post (1) & reduction gear set 1 pkt
560174 body mount set 1 pkt
560164 hard coated 7075 alu brake cam post & cam ( 2pcs/each ) 4 pkt
560192 shock 0-ring & washer ( 4pcs/each ) 11 pkt
560531 front anti-roll bar 2.5mm blue 2 pkt
560185 one-piece engine mount 2 pkt
560189 st steel 4x49.4.. front shock shaft ( 2 ) 7 pkt
560183 receiver battery pack mount 3 pkt
560144 14mm pivot ball, pivot ball spacer & nut ( 2 ) 3 pkt
560115 small bevel gear 13t 6 pkt
560129 st steel 3.5x41.5mm hinge pin ( for front upper/outside lower ) 2 pkt
560193 shock end cap set ( 2 ) 3 pkt
560176 carbon radio plate 1 pkt
560507 7075 alu rear lower rear ( 2.5 & 3.5 toe degree ) Hinge pin plate 5 pkt
560506 7075 alu rear lower rear ( 3 & 4 toe degree ) Hinge pin plate 1 pkt
560150 7075 alu rear lower front ( 1 & 2 anti-squat degree ) Hinge pin plate 4 pkt
560131 7075 alu front lower front hinge pin plate 9 pkt
560501 7075 alu rear lower front ( 1.5 & 2.5 anti-squat degree ) 5 pkt
560505 7075ali rear lower rear ( 1.5 & 2.5 toe degree ) Hinge pin plate 3 pkt
560181 alu radio plate support set 4 pkt
560168 servo saver set 2 pkt
560180 throttle servo linkage set 9 pkt
560109 front upper arm mount ( L & R ) 2 pkt
560201 alu shock cap 4 pkt
560196 hard coated front shock body 5 pkt
560204 shock spring holder & spacer set 3 pkt
560133 front upper flying wing arm ( nylon part only ) 1 pair 8 pkt
560169 st steel centre differential outdrive ( 2 ) 9 pkt
560211 front shock upper protective mount 3 pkt
560109 front upper arm mount ( L & R ) 3 pkt
560175 receiver battery pack box 2 pkt
560171 servo saver post set 3 pkt
560197 shock ball end & hardware set ( 2 ) 9 pkt
560152 rear hub carrier & mud sweeper ( 1 pair ) 6 pkt
560148 rear wing mount & holding set 3 pkt
560132 front & rear nylon bumper 6 pkt
560173 servo saver holder & front cushion stiffener set 2 pkt
560120 hinge pin nylon cap & adjuster set 4 pkt
560165 centre differential mount ( 1 set ) 2 pkt
560146 rear upper arm ( 2 ) 2 pkt
560121 St steel front/rear universal joint ( 2 ) 6 pkt
560101 st steel front/rear differential outdrive ( 2 ) 6 pkt
560122 7075 alu steering block ( 1 pair ) 4 pkt
560106 large bevel gear 43t 2 pkt
560170 steering rod nylon ball end set 13 pkt
560195 shock dust-resistant wiper ( 4 ) 17 pkt
560103 differential case gasket 3 pkt
560172 hard coated 7075 alu servo saver linkage plate set 2 pkt
560102 diff case set 5 pkt
560143 rear upper arm mount ( L & R ) 2 pkt
560124 steering block carrier ( 1 pair ) 4 pkt
560162 46t main gear 2 pkt
560147 rear gear box ( 1 set ) 1 pkt
560135 st steel 3.5x26mm hinge pin ( for front outside upper ) ( 2 ) 4 pkt
560139 chassis guard & stiffener 3 pkt
560214 rear wing 5 pkt
560216 fuel tank 4 pkt
K6401-1 dual stage foam element ( 2 ) 7 pkt
K6501-14 k factory hd 1/8 buggy clutch housing 14t 1 pkt
K6451 buggy air filter oil ( 20 ml ) 6 pkt
560137 hard coated 3mm 7075 alu chassis & centre stiffener 4 pkt
Note: Item now at sarawak, all item NIP. Pm me for order parts or refer to http://www.rcshopping.com/index.jsp for parts number and pic
![Big Grin](https://www.rctech.net/forum/classic_images/smilies/biggrin.gif)
![Big Grin](https://www.rctech.net/forum/classic_images/smilies/biggrin.gif)
![Big Grin](https://www.rctech.net/forum/classic_images/smilies/biggrin.gif)
i have some used item for sale, all item in best condition.
Item 1
Sanwa M11 with pro spectrum module, Craft Rc sticker, battery tray and 1 unit spectrum surface SR 3000 receiver. condition 8.5/10. PM me for price.
![](http://i282.photobucket.com/albums/kk256/evoton/Image1199.jpg)
![](http://i282.photobucket.com/albums/kk256/evoton/Image1201.jpg)
![](http://i282.photobucket.com/albums/kk256/evoton/Image1202.jpg)
Item 2
Robitronics Scalpel 1/18 2wd EP. come with Robitronics ori 300 motor, 1600 mah 4 pc batt, hitec HS-82MG steering servo. Bravo V16R digital ESC and Scalpel 1/18 bodyshell used. condition 9.5/10. PM me for price. if only interested in chassis only, price can be revised.
![](http://i282.photobucket.com/albums/kk256/evoton/Image1203.jpg)
![](http://i282.photobucket.com/albums/kk256/evoton/Image1206.jpg)
![](http://i282.photobucket.com/albums/kk256/evoton/Image1205.jpg)
![](http://i282.photobucket.com/albums/kk256/evoton/Image1208.jpg)
Item 3
GRP engine tuned by Mario Rossi. 21 on road promo kit. never race before. inculde with EFRA 2053 pipe and manifold. condition 9/10. PM me for price.
![](http://i282.photobucket.com/albums/kk256/evoton/Image1213.jpg)
or you can call/sms for item above at 016-8633013 for more detail. item at kuching. for outstation buyer, shipping charges will be bear by buyer. no bookings will be entertain unless paid. if buy more will pos-laju for free. Cepat Cepat SaPu or AnGkAt.....
![evoton is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Just Arrived!!! 1st in Malaysia !!!
Team Associated Factory Team RC8B 4WD Off-Road Buggy Kit
The Factory Team RC8B picks up where the RC8 left off by adding many performance and durability enhancing features that were pioneered by our Area 51 engineers and world class pro team drivers, making a great buggy even better! The new RC8B features include Factory Team 16mm Big Bore threaded, hard-anodized shocks, updated 5mm 7075 blue aluminum shock towers, 7075 blue aluminum suspension mounts, Factory Team 7075 blue aluminum one-piece top plate, forward placement battery box, and optimized steering geometry.
The RC8B gets you on the track fast, coming with pre-assembled shocks, diffs and turnbuckles, and also includes Factory Team shock and diff fluids. All of these refinements are what make the Factory Team RC8B a potent buggy ready to take your racing to the next level that is pure Associated!
Features
Pre-assembled shocks, diffs, and turnbuckles with Factory Team shock and diff fluids included
Factory Team 16mm Big Bore threaded, hard-anodized shocks feature heavy duty 4mm TiN coated stainless steel shock shafts for maximum smoothness
New 5mm 7075 blue aluminum shock towers allow the driver to stand the shock angle up for a more aggressive suspension
Optimized front upper camber link bushings allow for more tuning options and are easier to adjust and maintain
7075 blue aluminum suspension mounts front and rear, with inserts to allow easy and quick adjustment of rear toe-in, rear anti-squat, and front kick-up
Optimized steering geometry for more consistency and reduced bump-steer
Updated wing mount with additional clearance for 16mm shocks
Molded composite radio tray includes optional forward placement battery box for increased steering
Molded composite front and rear chassis braces
Tough steel-alloy shock stand-offs
Factory Team 83mm big wheels included
Machined aluminum racing clutch shoes
Lightweight engine mounts
Factory Team 7075 blue aluminum one-piece top plate
Light-weight 3mm hard-anodized chassis
4.30:1 ratio gearboxes for maximum punch
Heatsink brake discs with "FFC" Free Float Caliper brake system eliminates the possibility of unwanted brake drag while on throttle
Two-piece split-center diff mount allows quick and easy access to the center diff
Caster blocks adjust 14, 16, or 18 degrees with molded inserts
3.5mm light CVA drivetrain with full ball bearings
Rear molded CVA boots to keep dirt and mud out of rear joints
Blue aluminum hexes and nylon locking wheel nuts
![](http://i176.photobucket.com/albums/w186/alantham5299/asc80902.jpg)
selling RM2350 free shipping to malaysia
anything just call or sms me 012-4227997 Alan
Team Associated Factory Team RC8B 4WD Off-Road Buggy Kit
The Factory Team RC8B picks up where the RC8 left off by adding many performance and durability enhancing features that were pioneered by our Area 51 engineers and world class pro team drivers, making a great buggy even better! The new RC8B features include Factory Team 16mm Big Bore threaded, hard-anodized shocks, updated 5mm 7075 blue aluminum shock towers, 7075 blue aluminum suspension mounts, Factory Team 7075 blue aluminum one-piece top plate, forward placement battery box, and optimized steering geometry.
The RC8B gets you on the track fast, coming with pre-assembled shocks, diffs and turnbuckles, and also includes Factory Team shock and diff fluids. All of these refinements are what make the Factory Team RC8B a potent buggy ready to take your racing to the next level that is pure Associated!
Features
Pre-assembled shocks, diffs, and turnbuckles with Factory Team shock and diff fluids included
Factory Team 16mm Big Bore threaded, hard-anodized shocks feature heavy duty 4mm TiN coated stainless steel shock shafts for maximum smoothness
New 5mm 7075 blue aluminum shock towers allow the driver to stand the shock angle up for a more aggressive suspension
Optimized front upper camber link bushings allow for more tuning options and are easier to adjust and maintain
7075 blue aluminum suspension mounts front and rear, with inserts to allow easy and quick adjustment of rear toe-in, rear anti-squat, and front kick-up
Optimized steering geometry for more consistency and reduced bump-steer
Updated wing mount with additional clearance for 16mm shocks
Molded composite radio tray includes optional forward placement battery box for increased steering
Molded composite front and rear chassis braces
Tough steel-alloy shock stand-offs
Factory Team 83mm big wheels included
Machined aluminum racing clutch shoes
Lightweight engine mounts
Factory Team 7075 blue aluminum one-piece top plate
Light-weight 3mm hard-anodized chassis
4.30:1 ratio gearboxes for maximum punch
Heatsink brake discs with "FFC" Free Float Caliper brake system eliminates the possibility of unwanted brake drag while on throttle
Two-piece split-center diff mount allows quick and easy access to the center diff
Caster blocks adjust 14, 16, or 18 degrees with molded inserts
3.5mm light CVA drivetrain with full ball bearings
Rear molded CVA boots to keep dirt and mud out of rear joints
Blue aluminum hexes and nylon locking wheel nuts
![](http://i176.photobucket.com/albums/w186/alantham5299/asc80902.jpg)
selling RM2350 free shipping to malaysia
anything just call or sms me 012-4227997 Alan
![alantham5299 is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
Tech Master
iTrader: (9)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
![](http://img20.imageshack.us/img20/1390/dsc00005a.th.jpg)
item 1: futaba 3050 (0.16/60, 6.5kg/6V)
condition: 8.0/10. used in my serpent 720 for trottle. everything working perfect.
price: rm80 nett free POS in Malaysia
reason: selling my 720
![](http://img149.imageshack.us/img149/6953/dsc00018b.th.jpg)
![](http://img220.imageshack.us/img220/7791/dsc00016itv.th.jpg)
item 2: Carlsen Tuning "Sommer-Titan" Engine Heatsink for Novarossi 0.12 Enigne. Model CT-0801
condition: 10/10 New
price: RM100 free POS in Malaysia
reason: spare unit for my serpent 720
![](http://img219.imageshack.us/img219/7267/dsc00014p.th.jpg)
![](http://img220.imageshack.us/img220/8761/dsc00015yjf.th.jpg)
item 3: THS Racing 0.12 Turbo Tune Pipe set (Pipe + Manifold) model 1217C-6
Condition: New In Box
Price: RM120 free POS in Malaysia
reason: spare unit for my serpent 720
![](http://img219.imageshack.us/img219/2423/dsc00012i.th.jpg)
item 4: sanwa sx-165T (0.09/60, 9.5/6v) suitable for 1/8 or crawler.
condition: 9.9/10. run twice in EP car. as NEW
price: rm180 free POS in Malaysia
reason: gave up the idea of playing 1/8 buggy
item 5: serpent 720 07 SOLD
item 6: 1 unit of Orion 3800MH 30C Lipo Battery 7.4V. comes with box. SOLD
Items in KK, sabah. all quoted price not inclusive postage unless specified.
For enquiry, please PM or SMS me at 016-8384608 (Frankie). Can COD. Viewing can be arrange. Thanks.
![Wink](https://www.rctech.net/forum/classic_images/smilies/wink.gif)
![fly_wheel is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
new E-sky Belt CP Kits Carbon CNC Edition - RM400
![](http://img16.imageshack.us/img16/479/2905090227s.jpg)
![](http://img15.imageshack.us/img15/7996/2905090234.jpg)
New Rhino 2350mah 3S 11.1v 20c Lipoly pack - RM80 booked
![](http://img12.imageshack.us/img12/3705/0206090258.jpg)
Location : pj/damansara
Contact : 017 3147797
price update
![](http://img16.imageshack.us/img16/479/2905090227s.jpg)
![](http://img15.imageshack.us/img15/7996/2905090234.jpg)
New Rhino 2350mah 3S 11.1v 20c Lipoly pack - RM80 booked
![](http://img12.imageshack.us/img12/3705/0206090258.jpg)
Location : pj/damansara
Contact : 017 3147797
price update
![speedshock is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
![Thumbs up](https://www.rctech.net/forum/images/icons/icon14.gif)
AM Radio set for sale
-----------------------------------
Selling this AM radio set for sale (27Mhz). RX with BEC. Never been used. Condition: Excelent.
![](http://img190.imageshack.us/img190/7316/dsc01053b.jpg)
![](http://img189.imageshack.us/img189/2818/dsc01055u.jpg)
![](http://img193.imageshack.us/img193/7284/dsc01058v.jpg)
Price: RM60
Method delivery: Poslaju
Item location: Miri, Sarawak
Call or PM me: 019-8895987 (David L.)
-----------------------------------
Selling this AM radio set for sale (27Mhz). RX with BEC. Never been used. Condition: Excelent.
![](http://img190.imageshack.us/img190/7316/dsc01053b.jpg)
![](http://img189.imageshack.us/img189/2818/dsc01055u.jpg)
![](http://img193.imageshack.us/img193/7284/dsc01058v.jpg)
Price: RM60
Method delivery: Poslaju
Item location: Miri, Sarawak
Call or PM me: 019-8895987 (David L.)
![xl-racing is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Updated: Special Edition Custom built upgraded Carbon NRX-18 Kit
--------------------------------------------------------------------------
I'm selling Full perfoamnace upgrade plus Carbon NRX18 with customized kit.
The most detailed 1/18 ever made.![Nodding](https://www.rctech.net/forum/classic_images/smilies/nod.gif)
![Rotating Tire](https://www.rctech.net/forum/classic_images/smilies/tire.gif)
-Superb condition.
-NRX-18 upgraded carbon chassis (lower chassis protected with thin fabric tape)
-Full alloy metal dogbone/wheel drive shaft.
-HBX ball sleeved with adjustable "A" wishbone suspension.
-HBX precision perfect no binding gear.
-Alloy spacer "O" ring below the bulk head.
-HPI wheels and tyre (BBS wheels style) Original white and gold wheels.
-Special made 1/18 wheel hub to fit any HPI wheel set.
-High detailed HPI Micro RS4 Corvette bodyshell 150mm. (properly built)
-Durable HBX 4 orbit gear differential
-Alloy shell tower and motor holder
-Fully bearings chassis.
-comes with manual book
-Plus extra spare parts (spare stock chassis, bulk heads, "A" wishbone suspension set" , shocks/spring, extra stock chassis deck upper and lower, pinion gears, ball bearings, dogbones/wheel shafts, wheel knuckle and steering, HPI wheels)
**The front carbon chassis got this edge chipped off near the screw that holds the bumper, minor problem and its normal.
**Remember this is only kit with transmitter as shown in the picture.
Selling for funding on 1/18 off-road.![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
Price: RM350 (ultra cheap..my lost is your gain)![crying](https://www.rctech.net/forum/classic_images/smilies/bawling.gif)
Delivery: By postlaju.
Item location: Miri/Sarawak
SMS me: 019-8895987 (David L.)
Photo:
![](http://img41.imageshack.us/img41/7971/dsc00895y.jpg)
![](http://img37.imageshack.us/img37/3457/dsc00896i.jpg)
![](http://img11.imageshack.us/img11/382/dsc00904knw.jpg)
![](http://img29.imageshack.us/img29/3286/dsc00905j.jpg)
![](http://img11.imageshack.us/img11/2521/dsc00907hys.jpg)
![](http://img8.imageshack.us/img8/2470/dsc00908z.jpg)
![](http://img8.imageshack.us/img8/9127/dsc00913tvc.jpg)
![](http://img41.imageshack.us/img41/5951/dsc00914z.jpg)
![](http://img37.imageshack.us/img37/9808/dsc00918k.jpg)
![](http://img11.imageshack.us/img11/4559/dsc00920rrq.jpg)
![](http://img29.imageshack.us/img29/1006/dsc00921b.jpg)
![](http://img11.imageshack.us/img11/1891/dsc00923e.jpg)
![](http://img8.imageshack.us/img8/5628/dsc00924p.jpg)
![](http://img8.imageshack.us/img8/2011/dsc00925nub.jpg)
![](http://img41.imageshack.us/img41/9953/dsc00927b.jpg)
![](http://img37.imageshack.us/img37/2950/dsc00930o.jpg)
--------------------------------------------------------------------------
I'm selling Full perfoamnace upgrade plus Carbon NRX18 with customized kit.
The most detailed 1/18 ever made.
![Nodding](https://www.rctech.net/forum/classic_images/smilies/nod.gif)
![Rotating Tire](https://www.rctech.net/forum/classic_images/smilies/tire.gif)
-Superb condition.
-NRX-18 upgraded carbon chassis (lower chassis protected with thin fabric tape)
-Full alloy metal dogbone/wheel drive shaft.
-HBX ball sleeved with adjustable "A" wishbone suspension.
-HBX precision perfect no binding gear.
-Alloy spacer "O" ring below the bulk head.
-HPI wheels and tyre (BBS wheels style) Original white and gold wheels.
-Special made 1/18 wheel hub to fit any HPI wheel set.
-High detailed HPI Micro RS4 Corvette bodyshell 150mm. (properly built)
-Durable HBX 4 orbit gear differential
-Alloy shell tower and motor holder
-Fully bearings chassis.
-comes with manual book
-Plus extra spare parts (spare stock chassis, bulk heads, "A" wishbone suspension set" , shocks/spring, extra stock chassis deck upper and lower, pinion gears, ball bearings, dogbones/wheel shafts, wheel knuckle and steering, HPI wheels)
**The front carbon chassis got this edge chipped off near the screw that holds the bumper, minor problem and its normal.
**Remember this is only kit with transmitter as shown in the picture.
Selling for funding on 1/18 off-road.
![Sweating](https://www.rctech.net/forum/classic_images/smilies/sweat.gif)
Price: RM350 (ultra cheap..my lost is your gain)
![crying](https://www.rctech.net/forum/classic_images/smilies/bawling.gif)
Delivery: By postlaju.
Item location: Miri/Sarawak
SMS me: 019-8895987 (David L.)
Photo:
![](http://img41.imageshack.us/img41/7971/dsc00895y.jpg)
![](http://img37.imageshack.us/img37/3457/dsc00896i.jpg)
![](http://img11.imageshack.us/img11/382/dsc00904knw.jpg)
![](http://img29.imageshack.us/img29/3286/dsc00905j.jpg)
![](http://img11.imageshack.us/img11/2521/dsc00907hys.jpg)
![](http://img8.imageshack.us/img8/2470/dsc00908z.jpg)
![](http://img8.imageshack.us/img8/9127/dsc00913tvc.jpg)
![](http://img41.imageshack.us/img41/5951/dsc00914z.jpg)
![](http://img37.imageshack.us/img37/9808/dsc00918k.jpg)
![](http://img11.imageshack.us/img11/4559/dsc00920rrq.jpg)
![](http://img29.imageshack.us/img29/1006/dsc00921b.jpg)
![](http://img11.imageshack.us/img11/1891/dsc00923e.jpg)
![](http://img8.imageshack.us/img8/5628/dsc00924p.jpg)
![](http://img8.imageshack.us/img8/2011/dsc00925nub.jpg)
![](http://img41.imageshack.us/img41/9953/dsc00927b.jpg)
![](http://img37.imageshack.us/img37/2950/dsc00930o.jpg)
![](http://img190.imageshack.us/img190/6633/dsc01059y.jpg)
![xl-racing is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Sale!Sale!Sale!All must go.Help Me..Free gift oso got for certain items
Pls sms 0133257820
UPDATE NEW CAR!!!
New items and prices
not all items is negotiable and has a nice suprise...Only serious buyer.
1..Active A210SS .Used two weeks.Everything new.Except underchassis normal scratch.Come with front 3 way spool.Hoped up aluminium bulkheads(most expensive hop up for this car).2 Bodyshells Accord AND Mazda 6.Box given.
2)East Power 4200 mah Stick pack.8.5/10.Used once each on mchassis after that discharge and never use.RM150
3.HPI E10 Drift.Kit Only with servo and Nissan 350 White bodyshell RM500
5.Speed Passion 10.5T 9.99/10 RM200
4.Orca Gladiator 10/10 open box.RM250 Firm
5.HaiBoxing 1/18 On Road.Full Carbon Graphite.nEVER USE AFTER CONVERt.RM500.Very Smooth.Can roll 6 feet without motor meshed..
-Front And Rear Atomic Ball Diff.
-All Round Aluminium UJ.And Will Give some spares and Bearings together
-Selling RTR
6.LRP TC SPEC LIKE NEW.RM650 FIRM
7.Futaba S3114 Micro Servo New In Box RM100
8.Tamiya TEU 101 BK ESC.9/10 RM100[/SIZE][/COLOR]
9.Team Wave RB50 brand new w/o box.Box is a gone case already.Brand new without wires.Pics upon request.RM500
All Photo available on request.
Pls sms 0133257820
UPDATE NEW CAR!!!
New items and prices
not all items is negotiable and has a nice suprise...Only serious buyer.
1..Active A210SS .Used two weeks.Everything new.Except underchassis normal scratch.Come with front 3 way spool.Hoped up aluminium bulkheads(most expensive hop up for this car).2 Bodyshells Accord AND Mazda 6.Box given.
2)East Power 4200 mah Stick pack.8.5/10.Used once each on mchassis after that discharge and never use.RM150
3.HPI E10 Drift.Kit Only with servo and Nissan 350 White bodyshell RM500
5.Speed Passion 10.5T 9.99/10 RM200
4.Orca Gladiator 10/10 open box.RM250 Firm
5.HaiBoxing 1/18 On Road.Full Carbon Graphite.nEVER USE AFTER CONVERt.RM500.Very Smooth.Can roll 6 feet without motor meshed..
-Front And Rear Atomic Ball Diff.
-All Round Aluminium UJ.And Will Give some spares and Bearings together
-Selling RTR
6.LRP TC SPEC LIKE NEW.RM650 FIRM
7.Futaba S3114 Micro Servo New In Box RM100
8.Tamiya TEU 101 BK ESC.9/10 RM100[/SIZE][/COLOR]
9.Team Wave RB50 brand new w/o box.Box is a gone case already.Brand new without wires.Pics upon request.RM500
All Photo available on request.
![sudhar93 is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Bearings,
Please check your PM
Please check your PM
![sudhar93 is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
Tech Rookie
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
hot bodies original clear bodyshell
-andy moore dodge stratus
sold
call syed:012 3007442
location:shah alam,selangor
-andy moore dodge stratus
sold
call syed:012 3007442
location:shah alam,selangor
![mineral is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
Tech Rookie
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
hot bodies cyclone black edition
+accessories
+pinion
+manual
+battery strap
+battery white tape
sold(nego)....
skit2 bleh ar...
call:012 3007442(syed)
location:shah alam,selangor
+accessories
+pinion
+manual
+battery strap
+battery white tape
sold(nego)....
skit2 bleh ar...
call:012 3007442(syed)
location:shah alam,selangor
![mineral is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
Tech Rookie
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
futaba 3pm 2.4Ghz
-with reciever
-manual book
-hitec servo HS-645MG (ultra torque)
-original box
only RM 450
interested...
call syed:012 3007442
location:shah alam,selangor
-with reciever
-manual book
-hitec servo HS-645MG (ultra torque)
-original box
only RM 450
interested...
call syed:012 3007442
location:shah alam,selangor
![mineral is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
Tech Regular
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
hi
i m posting on behalf of my friend , he is letting his hyper 8.5 buggy kit.
buggy was never been into races, good condition,
below are the photo of the buggy itself.
please call owner during night time for sat til thursday,friday anytime at 019 946 8900.
thanks.
i m posting on behalf of my friend , he is letting his hyper 8.5 buggy kit.
buggy was never been into races, good condition,
below are the photo of the buggy itself.
please call owner during night time for sat til thursday,friday anytime at 019 946 8900.
thanks.
![novaa is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)
Tech Rookie
![Default](https://www.rctech.net/forum/images/icons/icon1.gif)
Hi RC member,
Anyone interested in Novak brushless system?
Anyone interested in Novak brushless system?
![kawan is offline](https://www.rctech.net/forum/images/statusicon/user_offline.gif)