Traxxas Rustler for Sale (RM2200)
#1
Traxxas Rustler VXL for Sale (RM2000)
Hi Guys,
Interested please WA 012-4090197 for more pics. COD around klang valley.
Heavily hop-up with alum and RPM parts
1) GPM alum front and rear shock tower
2) GPM full alum front and rear shocks (bigger than big bore) with 3 types of shock springs. Threaded body.
3) RPM trans case comes with 3 and 0 degree toe-in tabs for rear tires
4) GPM front and rear alum knuckles (C-hubs)
5) GPM alum front caster
6) STRC alum hex wheel adapter from Amain Hobby
7) Louise 2.8 tires front and rear
8) GPM alum steering bellcranks with bearings
9) GPM rear steal CVDs
10) RPM motor guard (blue)
11) Stock VXL brushless 3500kv motor and ESC (waterproof). 3s lipo can be used too but need to extend the ESC higher.
12) RPM front bumper
13) Stock 2075 water proof servo.
14) Stock Tx and Rx TQi 2.4GHz.
15) Stock graphic bodyshell grey color. Also with Proline protoform body cut to fit the truck.
16) Stock slipper cluth
17) Stock pinion (25T), spur and high speed pinion (28T)
18) RPM standard front and rear A-arms. Just fixed with RPM wide front A-arms now.
19) Box, Manuals and user guide, standard tools from the kit (all looks new)
20) Bearings replacement for wheels done before (using metal rather rubber seal bearings)
21) Lots of spare parts not open yet including one full new set of trans
(inner and outer) gears
22) Pre-soldered Traxxas connector with wire for hardpack battery will be given. I didn't change to deans.
23) Full hex screws used
24) Wheelie bar with Traxxas tires
Note : The ESC fan on the pic will not be given. You can put your own..JST connector from ESC is available.
Interested please WA 012-4090197 for more pics. COD around klang valley.
Heavily hop-up with alum and RPM parts
1) GPM alum front and rear shock tower
2) GPM full alum front and rear shocks (bigger than big bore) with 3 types of shock springs. Threaded body.
3) RPM trans case comes with 3 and 0 degree toe-in tabs for rear tires
4) GPM front and rear alum knuckles (C-hubs)
5) GPM alum front caster
6) STRC alum hex wheel adapter from Amain Hobby
7) Louise 2.8 tires front and rear
8) GPM alum steering bellcranks with bearings
9) GPM rear steal CVDs
10) RPM motor guard (blue)
11) Stock VXL brushless 3500kv motor and ESC (waterproof). 3s lipo can be used too but need to extend the ESC higher.
12) RPM front bumper
13) Stock 2075 water proof servo.
14) Stock Tx and Rx TQi 2.4GHz.
15) Stock graphic bodyshell grey color. Also with Proline protoform body cut to fit the truck.
16) Stock slipper cluth
17) Stock pinion (25T), spur and high speed pinion (28T)
18) RPM standard front and rear A-arms. Just fixed with RPM wide front A-arms now.
19) Box, Manuals and user guide, standard tools from the kit (all looks new)
20) Bearings replacement for wheels done before (using metal rather rubber seal bearings)
21) Lots of spare parts not open yet including one full new set of trans
(inner and outer) gears
22) Pre-soldered Traxxas connector with wire for hardpack battery will be given. I didn't change to deans.
23) Full hex screws used
24) Wheelie bar with Traxxas tires
Note : The ESC fan on the pic will not be given. You can put your own..JST connector from ESC is available.
Last edited by leonggyooi; 07-11-2016 at 03:43 AM.
#2
x nak ka...
#3
Tech Initiate
Bro, can nego?
#4
#5
just upgraded with new spring steel cvds which uses stock hex adapters..now use STRC alum hex adapters...
got the motor rotor cleaned too...attached some additional pics with stock shocks...check the comparison between GPM and stock shocks..
got the motor rotor cleaned too...attached some additional pics with stock shocks...check the comparison between GPM and stock shocks..
Last edited by leonggyooi; 05-18-2014 at 02:14 AM.
#6
new tires..
#7
with wheelie bar now..