Buy/Sell/Trade
#2491
for sale
Have 1 Kyosho RB5 SP2 with all upgrades $140.00 as roller, 1 stock RB5 roller $100.00,
SWEENO
RB5SP2 SOLD
SWEENO
RB5SP2 SOLD
Last edited by north_dog; 02-17-2011 at 05:54 PM.
#2493
Tech Regular
iTrader: (17)
Hobbywing Brushless ESC and 17.5t Motor. I have this laying around. I used it for a little bit starting back into the hobby. It's a sensorless ESC.
ESC Specifications
ESC Model: EZRUN-60A-SL
Dimensions: 31.5mm x 27.5mm x 24mm (The height of fan is not included)
Net Weight: 32g (without wires)
Continuous Current: 60A
Burst Current: 380A
Resistance: 0.0007 ohm
BEC Output: 6V/1.5A
Suitable Brushless Motor:
On-road: =>5.5T, Off-road: =>8.5T (2 cells Lipo / 6 cells NiMH)
On-road: =>8.5T, Off-road: =>13T (3 cells Lipo / 9 cells NiMH)
Working Battery Types: 4 - 9 Cells (NiMh) / 2 - 3 Cells (Li-Po)
Motor Type: Sensorless Brushless Motor
User Programmable: Available
Cable Type: 14 AWG (Battery and Motor)
Cable Length: 100mm (Motor), 150mm (Battery), 220mm (Receiver)
Recommend Model: RC Model 1/10 Car
ESC Features
Specially designed for RC car and truck, with excellent start-up, acceleration and linearity festures.
Compatible with sensorless brushless motor.
3 running modes suitable for different applications ("Forward with brake" mode, "Forward/Backward with brake" mode and "Rock crawier" mode).
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes ("Punch") from "Soft" to "very aggressive" to be suitable for different chassis, tires and tracks.
Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
8 steps of timing adjustment.
User Programmable. Several program methods are supported, such as: The "SET" button on the ESC, the digital LED program card, the advanced LCD program box, the PC software, etc. The program card and program box are pocket-sized and they have friendly user interface to be easily used.
Dustproof
Program Card Specification
Dimension (Length x Width x Height): 88mm x 58mm x 14mm
Program Card Features
- Running Mode
- Drag Brake Force
- Low Voltage Cut-Off Threshold
- Start Mode
- Maximum Brake Force
- Maximum Reverse Force
- Initial Brake Force
- Throttle Neutral Range
- Timing
- Over-Heat Protection
- Motor Rotation
- Lipo Cells
I'll take $45 or best offer. Local pickup preferred but I'm willing to ship it.
ESC Specifications
ESC Model: EZRUN-60A-SL
Dimensions: 31.5mm x 27.5mm x 24mm (The height of fan is not included)
Net Weight: 32g (without wires)
Continuous Current: 60A
Burst Current: 380A
Resistance: 0.0007 ohm
BEC Output: 6V/1.5A
Suitable Brushless Motor:
On-road: =>5.5T, Off-road: =>8.5T (2 cells Lipo / 6 cells NiMH)
On-road: =>8.5T, Off-road: =>13T (3 cells Lipo / 9 cells NiMH)
Working Battery Types: 4 - 9 Cells (NiMh) / 2 - 3 Cells (Li-Po)
Motor Type: Sensorless Brushless Motor
User Programmable: Available
Cable Type: 14 AWG (Battery and Motor)
Cable Length: 100mm (Motor), 150mm (Battery), 220mm (Receiver)
Recommend Model: RC Model 1/10 Car
ESC Features
Specially designed for RC car and truck, with excellent start-up, acceleration and linearity festures.
Compatible with sensorless brushless motor.
3 running modes suitable for different applications ("Forward with brake" mode, "Forward/Backward with brake" mode and "Rock crawier" mode).
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes ("Punch") from "Soft" to "very aggressive" to be suitable for different chassis, tires and tracks.
Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
8 steps of timing adjustment.
User Programmable. Several program methods are supported, such as: The "SET" button on the ESC, the digital LED program card, the advanced LCD program box, the PC software, etc. The program card and program box are pocket-sized and they have friendly user interface to be easily used.
Dustproof
Program Card Specification
Dimension (Length x Width x Height): 88mm x 58mm x 14mm
Program Card Features
- Running Mode
- Drag Brake Force
- Low Voltage Cut-Off Threshold
- Start Mode
- Maximum Brake Force
- Maximum Reverse Force
- Initial Brake Force
- Throttle Neutral Range
- Timing
- Over-Heat Protection
- Motor Rotation
- Lipo Cells
I'll take $45 or best offer. Local pickup preferred but I'm willing to ship it.
#2495
Nitro motors for sale
Werks B 5 motor, less than 1/2 gallon through it. I bought it new last summer, with a dynamite 86 pipe asking $125
Team GRP silver head motor, a gallon through it, with a dynamite 53 pipe asking $100.
Send me a pm or email
Thanks
Bryon
Werks B 5 motor, less than 1/2 gallon through it. I bought it new last summer, with a dynamite 86 pipe asking $125
Team GRP silver head motor, a gallon through it, with a dynamite 53 pipe asking $100.
Send me a pm or email
Thanks
Bryon
Last edited by B mullins; 02-19-2011 at 06:50 AM.
#2496
Tech Master
iTrader: (27)
FT b.1 for sale. Only ran at smac. 2 bodies, 3 wings, full AVID Revolution bearings put in for JC race, B FAST diff installed for JC race, 2 sets of v2 barcodes/Rips, 1 set of Blue bar codes. $200
ProTek 5000mah 65c battery with Deans. New in January. $50SOLD
JR Z8450 servo. 100oz tq .08 travel. $50
Tekin RS speedo. Perfect shape. $100 SOLD
ProTek 5000mah 65c battery with Deans. New in January. $50SOLD
JR Z8450 servo. 100oz tq .08 travel. $50
Tekin RS speedo. Perfect shape. $100 SOLD
Last edited by TfnG; 02-24-2011 at 02:50 PM.
#2498
R/C Tech Elite Member
iTrader: (42)
Actually I have an emaxx with about $300 worth of brand new parts. it has integy alum. front and rear shocks as well as bumpers looking to get $200.oo for it ready to run... I will have it with me at hutch sat. I would be willing to trade it for a good brushless setup while I am waiting to get my viper stuff.
#2499
Alrighty, here are a few more things for sale.
1) I have a Futaba 3PK transmitter module, antenna, and receiver for sale. I got these in a trade when I got my 3PK and I am not going to use them at all. The look to be in good condition and the antenna on the receiver does not have any nicks or tears in it. The module itself has a #71 crystal in it and the receiver will need a matching crystal, as it did not come with one. I also have the stock extendable antenna for the transmitter.
Here are the prices of full retail of everything:
RX full retail - $49.99
TX Module full retail - $57.99
Antenna full retail - $4.99
Total retail - 112.97
Price: $33 Shipped.
Pictures:
http://i211.photobucket.com/albums/b...e/IMG_0121.jpg
http://i211.photobucket.com/albums/b...e/IMG_0122.jpg
And if you wanted to deal locally in the STL area, I will be in STL this upcoming weekend (25, 26, 27) and I can work out some local deals. Also if you are in the Rolla, MO area, I can work out a local deal here, as I go to school at MS&T. Just send me a PM and we can work something out.
For trades, I am looking for a:
-Personal Transponder (either AMB or MyLaps, does not not have to have tabs but wires must be in good condition and work properly)
-Team Futaba Transmitter case for the 3PK
-Futaba Fasst receiver (F603FS or F603FF)
-SC10 FT parts (V2 shocks, motor plate, CVD's, ball diff, aluminum front bulkhead, aluminum rear 1* axle carriers, Ti turnbuckles, aluminum front hingepin brace, CF battery strap w/ blue thumb lockdowns, wheels/tires (JC Goosebumps, Double Dees, AKA Wishbones, Proline M3 Suburbs etc..))
-7.4v 2s high c rating lipos
-3PK Charger
- Or if there is anything you may think I might be interested in, shoot it my way. Worst I can say is no.
Feel free to PM me or e-mail me at [email protected] if you have any questions about the items I am selling. If you need more pictures of specific things, I can get those for you. I will ship as soon as I get payment, and if I am trading, I will ship as soon as I get the item. I have a good trader rating and I am true to my word. I will ship either USPS Priority Mail or Parcel Post, depending on costs. It will have delivery confirmation and be insured as well. I only accept PayPal. Please send as gift or add 3% to the item's cost.
Thanks ya's for looking!
1) I have a Futaba 3PK transmitter module, antenna, and receiver for sale. I got these in a trade when I got my 3PK and I am not going to use them at all. The look to be in good condition and the antenna on the receiver does not have any nicks or tears in it. The module itself has a #71 crystal in it and the receiver will need a matching crystal, as it did not come with one. I also have the stock extendable antenna for the transmitter.
Here are the prices of full retail of everything:
RX full retail - $49.99
TX Module full retail - $57.99
Antenna full retail - $4.99
Total retail - 112.97
Price: $33 Shipped.
Pictures:
http://i211.photobucket.com/albums/b...e/IMG_0121.jpg
http://i211.photobucket.com/albums/b...e/IMG_0122.jpg
And if you wanted to deal locally in the STL area, I will be in STL this upcoming weekend (25, 26, 27) and I can work out some local deals. Also if you are in the Rolla, MO area, I can work out a local deal here, as I go to school at MS&T. Just send me a PM and we can work something out.
For trades, I am looking for a:
-Personal Transponder (either AMB or MyLaps, does not not have to have tabs but wires must be in good condition and work properly)
-Team Futaba Transmitter case for the 3PK
-Futaba Fasst receiver (F603FS or F603FF)
-SC10 FT parts (V2 shocks, motor plate, CVD's, ball diff, aluminum front bulkhead, aluminum rear 1* axle carriers, Ti turnbuckles, aluminum front hingepin brace, CF battery strap w/ blue thumb lockdowns, wheels/tires (JC Goosebumps, Double Dees, AKA Wishbones, Proline M3 Suburbs etc..))
-7.4v 2s high c rating lipos
-3PK Charger
- Or if there is anything you may think I might be interested in, shoot it my way. Worst I can say is no.
Feel free to PM me or e-mail me at [email protected] if you have any questions about the items I am selling. If you need more pictures of specific things, I can get those for you. I will ship as soon as I get payment, and if I am trading, I will ship as soon as I get the item. I have a good trader rating and I am true to my word. I will ship either USPS Priority Mail or Parcel Post, depending on costs. It will have delivery confirmation and be insured as well. I only accept PayPal. Please send as gift or add 3% to the item's cost.
Thanks ya's for looking!
Last edited by MO Matrix 01; 02-19-2011 at 01:06 PM.
#2503
Tech Apprentice
losi buggy and truggy 2.0
seeling my losi buggy and truggy 2.0.....ready to go.......plus four engines....asking for 2,000 or best offer.....they r i in great shape
#2505
Tech Apprentice
yea i guess i could...but i do have smart diff in front and many upgades