|
Originally Posted by nwagner
(Post 14673073)
Would be nice to have one before the Halloween Classic!
|
Originally Posted by EAMotorsports
(Post 14673065)
How much you want to throw to have one of the first kits? :sneaky::sneaky:
EA $1000 us ready for someone to get me a T4 17 kit |
Originally Posted by dave-man
(Post 14672852)
The part number for the kit is #300023.
#301144 is the flex chassis part number. |
Originally Posted by syndr0me
(Post 14672900)
Right, was just pointing out that 301144 is a new part number, so new aluminum chassis. Probably with holes for the spine and its various mount points. And since RCMARKET didn't know about it, I'm gonna guess it'll be marketed as a US kit. All speculation. I'll throw money at the first person who can get it to my door, I don't give a f*ck about the price.
301143 T4'17 ALU CHASSIS 2.0MM - SWISS 7075 T6 301144 T4'17 ALU FLEX CHASSIS 2.0MM - SWISS 7075 T6 302536 ALU STEERING POST FOR FLOATING SERVO SAVER (2) 303066-O T4'17 ALU LAYSHAFT BULKHEAD CLOSED L/R - ORANGE 303067-O T4'17 ALU MOTOR MOUNT - ORANGE 303068-O T4'17 ALU MOTOR MOUNT PLATE - ORANGE 306204-O T4'17 ALU SERVO MOUNT - ORANGE 306233 T4'17 GRAPHITE FLOATING SERVO HOLDER 3.0MM 306530 T4'17 GRAPHITE CHASSIS STIFFENER 3.0MM |
Originally Posted by RC MARKET
(Post 14673423)
301142 T4'17 CHASSIS 2.2MM GRAPHITE
301143 T4'17 ALU CHASSIS 2.0MM - SWISS 7075 T6 301144 T4'17 ALU FLEX CHASSIS 2.0MM - SWISS 7075 T6 302536 ALU STEERING POST FOR FLOATING SERVO SAVER (2) 303066-O T4'17 ALU LAYSHAFT BULKHEAD CLOSED L/R - ORANGE 303067-O T4'17 ALU MOTOR MOUNT - ORANGE 303068-O T4'17 ALU MOTOR MOUNT PLATE - ORANGE 306204-O T4'17 ALU SERVO MOUNT - ORANGE 306233 T4'17 GRAPHITE FLOATING SERVO HOLDER 3.0MM 306530 T4'17 GRAPHITE CHASSIS STIFFENER 3.0MM |
I'm considering getting the '17 and have a question for Xray racers:
I currently drive a TRF419 and most of what would be option bits on an Xray came as standard on it (alloy steering arms, coated shafts, carbon bumper plates, alloy shock retainers.... I could go on!). What are the must have option parts that are usually required for an Xray? I race both indoors on a tight track and outdoors. |
Originally Posted by Barry_Hughes
(Post 14673427)
Any news on the different kits - US - Rest of the world ?
|
Originally Posted by daveaustin5
(Post 14673430)
I'm considering getting the '17 and have a question for Xray racers:
I currently drive a TRF419 and most of what would be option bits on an Xray came as standard on it (alloy steering arms, coated shafts, carbon bumper plates, alloy shock retainers.... I could go on!). What are the must have option parts that are usually required for an Xray? I race both indoors on a tight track and outdoors. Funny you should mention alloy parts as standard. I think Xray plastics are way better. C hubs for instance don't break like you own the factory, that's for sure. That said, even on TRF cars I prefer carbon plastics to alloy. They are lighter, cheaper, and less likely to tweak (come to think of it however, I don't think I've seen a carbon steering arm on a TRF car for a while, and I am not sure they exist even as "option") |
Originally Posted by daveaustin5
(Post 14673430)
I'm considering getting the '17 and have a question for Xray racers:
I currently drive a TRF419 and most of what would be option bits on an Xray came as standard on it (alloy steering arms, coated shafts, carbon bumper plates, alloy shock retainers.... I could go on!). What are the must have option parts that are usually required for an Xray? I race both indoors on a tight track and outdoors. Graphite arms Graphite c-hubs Thinner roll bars (1.3f, 1.2r) Springs - 2pairs 2.7, 2pairs 2.6, 2 pairs progressive 2.5-2.8 2 pairs PSS shock inserts for outdoors. The alloy steering is nice to have, but not a massive necessity IMO. However hopefully the new kits might revise the standard parts included, which will reduce the parts list a bit. |
Originally Posted by daveaustin5
(Post 14673430)
I'm considering getting the '17 and have a question for Xray racers:
I currently drive a TRF419 and most of what would be option bits on an Xray came as standard on it (alloy steering arms, coated shafts, carbon bumper plates, alloy shock retainers.... I could go on!). What are the must have option parts that are usually required for an Xray? I race both indoors on a tight track and outdoors.
Originally Posted by TryHard
(Post 14673459)
Honestly my must haves would be;
Graphite arms Graphite c-hubs Thinner roll bars (1.3f, 1.2r) Springs - 2pairs 2.7, 2pairs 2.6, 2 pairs progressive 2.5-2.8 2 pairs PSS shock inserts for outdoors. The alloy steering is nice to have, but not a massive necessity IMO. However hopefully the new kits might revise the standard parts included, which will reduce the parts list a bit. |
Thanks.
What's the expected price? I've seen it in the UK for £420 but I'm hoping it will be a bit cheaper than that. |
Originally Posted by daveaustin5
(Post 14673522)
Thanks.
What's the expected price? I've seen it in the UK for £420 but I'm hoping it will be a bit cheaper than that. Though obviously nowhere has it yet |
Thanks
|
Anyone who is interested in getting on my preorder list just shoot me an email. There is a link in my signature. Preorders will receive a couple of my bumpers with their kits.
EA |
306530 T4'17 GRAPHITE CHASSIS STIFFENER 3.0MM
:nod: |
| All times are GMT -7. It is currently 11:00 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.