|
Originally Posted by hanulec
(Post 14535038)
Nazda4 feels someone like an LTC-R
We did some extensive testing w/ the Nazda4 at Mile High Champs and found that it really depends upon the layout. The Nazda4 has extreme high speed steering so if your layouts have a lot of full or near full throttle turning sections then it will be a great body. Alternatively, when you have a lot of tight low speed corners nothing seems to match the Nazda2 corner rotation. In fact we had 6 of 10 A-main drivers in 17.5 TC at Mile High Champs --- not to mention it won the 2016 ROAR Carpet National Championship in 17.5 and 13.5 TC the month prior. |
The Mon-Tech IS-200 body is now ROAR approved -- 016-004 (IFMAR 1647). This is the 5th body approved now by ROAR in 2016
|
we've been seeing a lot of different questions about the best mounting location for the ROAR certified 1/10th EP TC racing bodies. here is our best summary---
Mounting Neutral/Centered on wheel wells in front end: - Nazda3 - Silvy - Nazda4 Mounting Extremely Forward -- On Amtx or XRay cars - adjust the rear body post first so that it nearly goes through the rear wing upright: - Nazda2 - IS-200 |
Can you post a picture please.
|
Originally Posted by Root_66
(Post 14642018)
Can you post a picture please.
|
Mon-tech racing Dominates 2016 International Indoor Championships - IIC! What a difference two years makes! 5 TQ + Wins!!
Modified TC - Bruno Coelho - Mon-Tech IS-200 13.5 TC - Jan Ratheisky - Mon-Tech Nazda2 17.5 TC - Mike Gee - Mon-Tech Nazda2 Amateur TC - Armand DeForest - Mon-Tech Nazda2 F1 - Jan Ratheisky - Mon-Tech F13 https://www.facebook.com/MonTechRacingUSA/ |
Jan used the stock X-ray '16 body for F1 at IIC.
|
Quick intro video on the pre-cut Mon-Tech Nazda2 and IS-200 bodies-
https://www.youtube.com/watch?v=4u1u...ature=youtu.be Mon-Tech Racing USA will have pre-cut body samples for XRay and Awesomatix available at Snowbirds for people to check out |
Will you also have F1 front wings available also? Can't get any .
|
IS-200 and 1.0mm/hard wings available tomorrow at the Reedy Race over in the invite section. If you cannot find us, just ask Eric from PROTOform.. he knows where we are :)
|
Originally Posted by hanulec
(Post 14937134)
IS-200 and 1.0mm/hard wings available tomorrow at the Reedy Race over in the invite section. If you cannot find us, just ask Eric from PROTOform.. he knows where we are :)
|
I see many people say that the IS200 and Nazda 2 are the bodies to have. What is the direct comparison between the two in terms of handling? What is the reason that the Nazda appears to be more preferred for stock racing and the IS200 more preferred for mod?
|
The Nazda 2 has less initial steering, and more mid corner steering. The IS200 has more initial steering, and is more stable mid corner. The IS200 also has more downforce so is better at high speed.
N2 is liked for stock for its cornerspeed. IS for mod for downforce and stability. Many peopl like the IS for stock as well, it comes down to driver/setup preferences |
One last statement to add to Gee's-- unless you have euro-style sweeping corners, the is200 is likely better on asphalt in all motor classes.
|
so when are the mon-tech racer bodies gonna be in stock?
|
| All times are GMT -7. It is currently 07:08 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.