JEFFs SC10

iTrader: (15)

by changing the mounts you can change the toe in in the rear.

they also work to change the width.

the manual explains it in the back.

TeamThibault

I was trying to put my dif together but had to skip the small shim. When I had the pin in it . It would not turn. TrY to take out the out drive and see if any thing was stopping it. But it look fine. Should I worry about the small shim?

big deee

I put the small shim outside the diff on the outdrive.

TeamThibault

That works. kinda still hard to turn
Did you have the same problem?

big deee

Yup had the same problem. Found a video on YouTube that tells you to put the large shim inside and put the small shim outside.

TeamThibault

Took the small shim out and it's still way harder to turn then the other side.....what should I do?

big deee

Skip to 7:06
https://www.youtube.com/watch?v=iHJq...ature=youtu.be

TeamThibault

Well I tried that way but didn't work on the bowl side. So I did as manual but. On the shallow side I shaved the out side and then the pin would fit with the small shim outside of the dif and now it moves freely

hobbs

iTrader: (32)

So, updated kit comes with new shock towers & low profile shocks??

Scionara05

iTrader: (2)

Is there part numbers for them already or is it ganna be a running change

RobS

I doubt it'll be a whole new kit. Probably just an option.

Scionara05

iTrader: (2)

Ran my first onroad first
Race last night noticed the car felt flat still running 48p but geared at 4.11 final drive ratio
Everyone's running the awsomatix a800 or an xray t4 all at about the same final but im getting spanked on the straight any help would help
Temps are about 150 to 160 range

EricF

Scionara05-
What's your entry line like onto the strait and how's your corner speed, are you generating the same traction compared to theirs?
E

shortcut

iTrader: (55)

Make sure your belts aren't to tight.

Scionara05

iTrader: (2)

Well being i am new to this i am staying on throttle from the 2nd to last turn going on to the straight currently using eric epps high grip grey crc setup car is great but just the speed is lack luster on the straight infeild is good letting up a lil bit for the s sections then back on