|
Originally Posted by Schuie Driver
(Post 15828111)
Thanks for the replies guys. Just ordered two of them.
Simple - Are you still using this bumper now and if so how well has it done in terms of keeping the shell from cracking/ripping? |
Originally Posted by Schuie Driver
(Post 15827972)
Bringing up an old post, but after pretty much beating the heck out of a new C8 body this weekend (yeah I'm a terrible driver) I was wondering if anyone had run foam up front to support the bodies of these cars and came across this. Do you happen to have a part number for the Tamiya bumper?
|
Has anyone found some bodies fitting better then others. I just mounted the Bittydesign Agata and at 171mm the tires are right up against the fender edge. Is this what others are finding?
|
Originally Posted by Friulimotosport
(Post 15831710)
Has anyone found some bodies fitting better then others. I just mounted the Bittydesign Agata and at 171mm the tires are right up against the fender edge. Is this what others are finding?
and his tears are right flush to the fenders in the rear. |
Originally Posted by Friulimotosport
(Post 15831710)
Has anyone found some bodies fitting better then others. I just mounted the Bittydesign Agata and at 171mm the tires are right up against the fender edge. Is this what others are finding?
|
Originally Posted by Apex
(Post 15831725)
BittyDesign designs their GT12 bodies based on BRCA specs which has a rear track width of 165mm. I mounted a BittyDesign Seven20 on YRX12'19 which has a track width of 172mm and the wheels stick out a little. BittyDesigns should probably make a US Spec version of 172mm. I looked up if the US GT12 specs have a track width requirement, but I couldn't find anything so I'm assuming it's 172mm based on ROAR rules. Link to my IG pics of the Seven20 body - @apex_rc • Instagram photos and videos
|
Hi,
Anyone knows of any 1/12 GT bodyshell which can fit the Yokomo GT 300/500 chassis, which has a wheelbase of 234mm? I noticed most of the current GT12 chassis has a much shorter wheelbase. Thanks. |
First run on the car and it went better then I was expecting. Very easy to drive other then it wanted to kick the back out on tight 180* turns.
Any advice on first things to change. Thanks |
Hey guys I'm new to the 12gt class. I bought a Schumacher atom 2. I was wondering what I should gear it to. We run 21.5 motors on 1s. any help would be awesome.
|
Originally Posted by TonyD.
(Post 15832323)
Hey guys I'm new to the 12gt class. I bought a Schumacher atom 2. I was wondering what I should gear it to. We run 21.5 motors on 1s. any help would be awesome.
spur gear x tire dia. x 3.14 / pinion gear |
A couple of bodies that work with 172 width are the Montec Akura and the PF C8.
|
Originally Posted by old_dude
(Post 15832386)
A couple of bodies that work with 172 width are the Montec Akura and the PF C8.
|
Originally Posted by Friulimotosport
(Post 15832536)
The mon-tech Akura is the body I have and it just fits . If your body holes are off a bit then the tires will overhang.
|
Originally Posted by gwc
(Post 15832373)
I race GT12 rubber tire class at Apex raceway in TN and found with my Hobbywing V10 21.5 a rollout of 84.6 to 86.43 works well. Tire Dia. 41mm 47t pinion 70t spur.
spur gear x tire dia. x 3.14 / pinion gear |
I run the montech GT3 body and it fits almost perfect
|
| All times are GMT -7. It is currently 11:10 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.