Gridworks Racing

iTrader: (3)

For anybody who is interested, I have 1 used R1 Wurks 13.5 that I am willing to part with The motor has been used for two race days and the rotor tested 1440.

PM with any questions.

RedBullFiXX

iTrader: (34)

Did some 12th 13.5 testing today

Carpet low-med grip
90x45

20'
85 roll
much torque
low temps

Jimmy Morris

iTrader: (9)

pm'd

tobyzhang

iTrader: (15)

Any plans to offer separate rotor? I feel mine is not as strong as some of the other's

R1wurks

iTrader: (1)

Selected Upgrade Rotors will be available soon.

R1wurks

iTrader: (1)

Eta on the motors 5/30/14, still gonna be limited availability at this date. More motors will arrive the weeks after.

Thanks everyone for your patience.

Steve

EDWARD2003

iTrader: (8)

You better be sending a boat load of your 21.5's over to Japan. The All Japan Nationals are coming up in the month of July. I would like to get my hands on one and I bet a few people would like to try them too!

Mornedn

These don't work in boosted..... We did some testing and smoked 4 x 17.5 motors. They look OK in blinky, but from what I saw it not good for boosted!!

RedBullFiXX

iTrader: (34)

Quite a bit of default timing built in with R1 motors
One may have picked up on that after the first few smoked eh

Boosting stock motors is dead in USA, which is where this motor is developed

Mornedn

Four people all experienced drivers......We even ran them on zero can timing..... Its not the first time we tried new motors, but hey feel free to run them is boosted.

R1wurks

iTrader: (1)

R1 motors are now recognized by JMRCA sanctioning body for racing in Japan.

Please see link below- http://www.jmrca.jp/motor/2014/motor2014.htm

R1wurks

iTrader: (1)

We haven't tried this motor in boosted, here's an email from someone that tried it.

Willem JANSE VAN RENSBURG
Message: Hi, we resantly tested a few R1 wurks 17.5 motors here in South Africa. We run 17.5 boosted and in the process of finding the limit I burned two motors. The motors performed extremely well untill I pushed it to far. Do you maybe sell the stators of these motors seperatly?

Josh-n-ya

iTrader: (95)

Locked down a solid TQ yesterday at first qual. But track conditions got worse and not finding the right setup I failed at. I was holding them all off in main for awhile but was fish tailing it everywhere. Thanks again Steve for all the help.

to slow for you

also need to know about replacement stator son burnt one

R1wurks

iTrader: (1)

replacement stators are available.


please email us at [email protected]