|
Originally Posted by niznai
(Post 13163634)
That sounds strange or missed something. Less caster=more steering, right?
More caster = less low speed steering, more high speed steering |
I'm curious, does anyone shim their front hub assemblies where they connect to the lower arms to take out some of the play?
|
Originally Posted by c2tcardin
(Post 13168012)
I'm curious, does anyone shim their front hub assemblies where they connect to the lower arms to take out some of the play?
|
Excuse me guys,
which differences there are between the screw holes of the 417 topdeck and the 418 one? (a 418 topdeck will fit on a raceberry 417?) thanks for help |
Originally Posted by b20btec
(Post 13168112)
I do, I shim accordingly. I also shim the barrel washers connected to the upper links. It doesn't take much to get it right but you will notice a difference when you check your droop, the play will be gone.
Sorry but im not following the barrel washers? Pic? Forgive me Im new to the onroad stuff... |
Originally Posted by NickGroves
(Post 13174145)
Sorry but im not following the barrel washers? Pic? Forgive me Im new to the onroad stuff...
|
Originally Posted by c2tcardin
(Post 13174386)
He's referring to the Flanged Tube's that act like sleeves or liners in the "C" Hubs, see parts BC14 & BC15 in step 16 on page 11 of the 418 manual. The manual says to shim with a 3x.7mm shim though I've had to put in one or two .1mm shims as well to remove some of the slop.
|
Originally Posted by NickGroves
(Post 13174448)
Yeah I knew qhat you were talking about as soon as you said flanged tubes. Haha. Wasn't seeing it as a barrel. But to each his own.
|
TRF418 In Stock Superior Hobbies.com
|
Originally Posted by NItrox416
(Post 13173981)
Excuse me guys,
which differences there are between the screw holes of the 417 topdeck and the 418 one? (a 418 topdeck will fit on a raceberry 417?) thanks for help |
Originally Posted by NItrox416
(Post 13178406)
Nobody can help me?
|
Originally Posted by Qatmix
(Post 13178491)
I have just checked for you. It won't fit as the 418 top deck is sorter by 2-3mm so the holes don't line up.
|
4 Attachment(s)
Based off my tires what would some good changes be? I've only ran these tires two weekends and about 6 times total for about 5mm a piece. We are running 13.5 blinky on medium grip asphalt. I didnt hear them squealing (but I wasnt really listening for it the first day). But the tires really seam like they dropped of quite a bit to the point where im lacking that traction coming off the corner. They are sorex 36 premounted. Its a smaller parking lot track.
And no thats not my 418. I gave the tores to a friend as I was going to pitch them. First pic is right rear second pic is left rear third pic is left front forth pic is right front |
anyone know where I can get my hands on part #19804781 stabilizer ends?
not in stock any where it seems |
Nick it looks like you need a touch more camber.
What additive are you using, are you using warmers? |
| All times are GMT -7. It is currently 08:45 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.