Alex Racing Stinger
#541
Originally Posted by yyhayyim
Great- but where do I get one? do they have a website to see more of the car? What about parts ordering- need somewhere to get the parts...thanks...
There might be a shop close to you,I know about
As you can see on my profile I got mine from WWW.A-RC.DK
#542
Originally Posted by yyhayyim
Great- but where do I get one? do they have a website to see more of the car? What about parts ordering- need somewhere to get the parts...thanks...
You can go onto Alex's site http://www.alex.ne.jp/rc/top/rc.html
Or my site shows the features of this kit in english along with more images.
http://www.rcinfusion.com/KitDetail.aspx?KitID=923
I also carry a full range of parts for both the Stinger and Barracuda R3.
I have 4 Barracuda R3's in stock, and 1 Stinger that I assembled for photography purposes, it has never been run but it has been built to race.
Let me know if you're interested.
Regards, Rob
#543
Interaktiv PDF setup sheet
Originally Posted by sbs
Hi Stinger drivers
I my have some good news for you
With in a very short time I will have a Stinger Interaktiv PDF setup sheet reedy
I my have some good news for you
With in a very short time I will have a Stinger Interaktiv PDF setup sheet reedy
If any of you want a copy of it , you can send me a PM with a e-mail adr. ,then I will mail it to you.
#544
Hi guys, I remember someone mentioned about a Spool before? Has that gone into production? Would like to get more feedback on it.
I have recently put in a very tight (not lock) front diff into my Stinger and boy did you go well with it. One meeting I could barely control the beast when it had a one way, the next I put in the diff and it cancelled out a lot of the extra movements. Will work on a better setup and post it here.
I have recently put in a very tight (not lock) front diff into my Stinger and boy did you go well with it. One meeting I could barely control the beast when it had a one way, the next I put in the diff and it cancelled out a lot of the extra movements. Will work on a better setup and post it here.
#545
Originally Posted by FaiLip
Hi guys, I remember someone mentioned about a Spool before? Has that gone into production? Would like to get more feedback on it.
I only got 2 spools made, one to Nielsen and one to my self (see pic. of them at post 485)
This spool is made of dural alluminium and weighs around 20g.
With the spool we are also able to attack hard on the inside to a coner and it draws hard out of the turn.
The car will understeer a bit but not much.
If you can, get one and try it!
#546
Thanks for the pointer, been away from this forum for awhile, but I do have some question that I need help resolving. Basically I have traction problem with my Stinger. I have tried many things to keep oversteering, but find that the car is alright with low power (stock) motor, but as soon as you put something decent (12T) the car will not be able to handle it. It almost feel like torque steering. Have you guys come across this? Do you have any setup that you guys can share for low traction surface? I tried that diff, it work, but still think the car works better with either a spool or one way. Any assistance is much appreciated.
Thanks in advance
Philip
Thanks in advance
Philip
#547
hey guys im planning to get one.. and what can you say about this kit??
and where i can download the stinger manual??
and where i can download the stinger manual??
#548
geezzz this post have really gone dead, well here is the new car from Alex Racing Design, the bell drive that we have been tease upon.
CER its call and it look like a CE4 with Stinger suspension setup. Quite different as the motor is up front. Really wonder how it would handle, maybe time for some of the guru of this thread to share some thoughts
http://www.alex.ne.jp/rc/cer/cer.htm
CER its call and it look like a CE4 with Stinger suspension setup. Quite different as the motor is up front. Really wonder how it would handle, maybe time for some of the guru of this thread to share some thoughts
http://www.alex.ne.jp/rc/cer/cer.htm
#550
Originally Posted by $$$...
Is this a re-release of the "Club Enthuse 4 " that they had a few years back?
Looks nice though...
Looks nice though...
#551
Yea, agree that it will be a great drift chassis, but boy I really want to see how well it does on the track against the likes of HB, Tamiya, Yoks and other great TC Chassis
#552
Found this in my garage...
#553
My Stinger
#554
#555
Notta. Long gone.