spintec I.C.C charger
#1321
I sent my spintec out over 3 weeks ago for service.. I have recieved one email from Erik with the price... I asked him where to paypal it to with no reply... I sent another email to both of his accounts with no reply.. it goes in spurts I suppose.
Chad
Chad
#1322
hi, has anyone got any feedback on charging EP 4200 cells
#1323
I heard from Erik today.. we got things fixed.. misscommunication.
I charge EP cells... Usually 3mv cutoff with 130degrees temp cutoff.. at 6.5 amps.
Chad
I charge EP cells... Usually 3mv cutoff with 130degrees temp cutoff.. at 6.5 amps.
Chad
#1324
Anybody got any charge settings for EP4500's?
Thanks
Skiddins
Thanks
Skiddins
#1325
Tech Fanatic
#1326
130 farenhiet? is that a problem... manufacturer suggests 135...
Chad
Chad
#1327
Thanks Erik for the great customer support!
#1328
Tech Fanatic
#1329
Tech Adept
Hi Guys, got a new spintc with 5 cell built into it. GGot some brand new smc4200's cells are 3 run old, they charge up to 3900 to 4100, got a ctx d2 discharger when doing the pulse discharge at 30amp.. the lowest cell in the pack is 409 seconds and the highest cell is 460???? discharging down to 0.9 per cell.
any ideas charger or cells just crap??
Thanks
Ricky Copsey
any ideas charger or cells just crap??
Thanks
Ricky Copsey
#1330
Hi Guys, got a new spintc with 5 cell built into it. GGot some brand new smc4200's cells are 3 run old, they charge up to 3900 to 4100, got a ctx d2 discharger when doing the pulse discharge at 30amp.. the lowest cell in the pack is 409 seconds and the highest cell is 460???? discharging down to 0.9 per cell.
any ideas charger or cells just crap??
Thanks
Ricky Copsey
any ideas charger or cells just crap??
Thanks
Ricky Copsey
Skiddins
#1331
Tech Adept
5 amp charge, .3 fall back each cell.
rc
rc
#1332
Don't forget all your cells are chaged separately so they will have different discharge times.
Do they peak/temp cutoff at the same time?
Do they peak/temp cutoff at the same time?
#1333
Okay guys, I'm in the market for a new charger and I've been looking at the ICC. I've read a few pages back and it seems like the spring posts tend to break, correct? Also what is the latest firmware and hardware versions? Is there a 5 cell version charger too?
I have a computer with vista on it and want to know if it will work when updating the firmware. Thanks in advance.
I have a computer with vista on it and want to know if it will work when updating the firmware. Thanks in advance.
#1334
Tech Master
iTrader: (14)
I gotta say that I am really happy with this charger.
I got mine a little while ago and for older-packs, this charger is awesome! I had a battery with 2 pretty dead cells (4200 IB) that was false peaking on my Futaba CDR 5000... put this battery onto the ICC and it's like it brought the cells back to life. Can't wait to start charging new packs on this thing - I can only assume that it will help keep my new packs stronger for longer.
Although you have to be much gentler with the ICC versus a traditional charger, the performance gains are well worth the $$$ IMHO.
Great job Spintec
I got mine a little while ago and for older-packs, this charger is awesome! I had a battery with 2 pretty dead cells (4200 IB) that was false peaking on my Futaba CDR 5000... put this battery onto the ICC and it's like it brought the cells back to life. Can't wait to start charging new packs on this thing - I can only assume that it will help keep my new packs stronger for longer.
Although you have to be much gentler with the ICC versus a traditional charger, the performance gains are well worth the $$$ IMHO.
Great job Spintec
#1335
Tech Initiate
Lipo??????
Hi guys, if I connet this item by Losi:
http://www.losi.com/Products/Feature...rodId=LOSB9607
in external output device in mi Spintec ICC, can I charge a Lipo Trakpower Pack?
I haven't rumors for upgrades on Spintec ICC firmware for lipo battery and I want use a pack of it.
Any info?
Ciao, Ciao
http://www.losi.com/Products/Feature...rodId=LOSB9607
in external output device in mi Spintec ICC, can I charge a Lipo Trakpower Pack?
I haven't rumors for upgrades on Spintec ICC firmware for lipo battery and I want use a pack of it.
Any info?
Ciao, Ciao