Hot Bodies TCXX
#273
Hi guys do you know of any other brand's of rear belt that will fit the car e.g. xray, yokomo, just rear belts for this car are hard to get in Australia atm
thanks
thanks
#274
Tech Regular
TCXX Team Build Tips
Hi Guys, I have just got one of these and before I start building im wondering if there are any tips that I should now ?? Like should I build the shocks with 2 O rings ?? stuff like that
#275
Tech Elite
iTrader: (8)
I know that's not a pro tip. But this kit can be very confusing. As well as make sure you align the arms on the correct side during the install.
#276
Tech Regular
steel front drive shafts 88914
A few people have told me that the front ally driveshafts were a weak spot on the TCX so they use these steel drive shafts 88914. Will these still fit the TCXX as the drive shafts on the TCXX have a 2mm pin compared to a 2.5 mm pin on the Steel drive shafts
#278
Tech Regular
#280
Tech Elite
iTrader: (6)
Look here
speedtechhobbies.com
tqrcracing.com
stormerhobbies.com
amainhobbies.com
#282
Tech Regular
Thanks, Those you mention are 46mm long but on the new TCXX the front drive shafts are 44mm long. Does it matter switching between the 2 ?? what other changes will I need to make in order to run 46mm front drive shafts/ dog bones
#283
I use Spec-R double cardan 46mm, strong and no chattering, need to use the old steel joints 61087 or joints POM 68770.
#284
Tech Regular
The other advantage of the 46mm shaft is that you can use either spool cup. If you use a 44mm shaft then you'll have to use the long one, which is a pain if they go out of stock. I actually think the shorter cup is stronger too.
#285
Tech Regular
Thanks for all the replys, but I have to ask. Why do I need to change the spool cups when I change the front drive shafts / dog bones from 44mm to 46mm ??