NolanP

iTrader: (8)

You can't find or don't have something smaller? Cause I have seen 88 and less spurs that would bolt up with two screws. The smaller the spur the bigger the pinion. If there's a will there's a way.

B00t13g

iTrader: (9)

It just doesnt seem like much larger than a 49 will fit on the car. I'll try it in a little bit.

Philipp1990

Hell Yeah!

Itīs a wrap!

Mr. MR4

iTrader: (8)

What servo horn do you have mounted in the pic?

Craig W

iTrader: (1)

Could be square rc 1

Philipp1990

Yes its a Square!! ;-)

A Ilievski

iTrader: (39)

The rc square horns are hard to get, rcmarket have them in stock ATM

b_recliner

iTrader: (22)

Phillip...that is one clean build and wire job!! I always like seeing that.

B00t13g

iTrader: (9)

I got to drive the car with the kit setup on a low-medium traction carpet track today. Ae 500 in the shocks 900 in the rear diff on sweep r32s. Car was strapped with traction to spare.

NolanP

iTrader: (8)

I slapped a 72 spur in the car it looks funny! Will post a pic in the am. Should have the new collar tomorrow. Then its some quick setup and look at the car some more.

OVA

iTrader: (86)

72T spur ?? 48Pitch Right?

NolanP

iTrader: (8)

Mmmm nope it's 64 pitch. It's for my 12th scale. But it fit.

72/41. That doesn't make sense?

B00t13g

iTrader: (9)

Let me know what pinion you find to work. I need to run between 3.2-3.4 in about a month.

NolanP

iTrader: (8)

100/47 was the magic number. Kyosho looks like they have a gear that works. Crc spurs fit I will post part number tomorrow. Also gonna try to stop at a hobby shop to grab some spurs/pinions.

Remember the cars gear ratio is 2 so technically 72/43 puts you in that area. But I'd like to try a little bigger spur gear.

B00t13g

iTrader: (9)

The kimbrough spurs work as well. 100/47 puts you at 4.25? That's geared a little low. I'm going to run a club race tomorrow with 96/48 which puts me at 4.0 with a reedy 17.5. I've been running a d3.5 in my T3 at 4.04 for my track and it was perfect!