pettyeagles

iTrader: (86)

Fow are in stock at TQ Racing.

spring71

iTrader: (3)

Thank you...

We've got D3 option parts back in stock today.

http://www.tqrcracing.com/shop/produ...id=56&s_sort=4

http://www.tqrcracing.com/shop/parts...arts_p_id=4416

FYI, Thanks.

Tristian93

My sakura is Catttering when I have full lock on my Front wheel
Why is that I have been looking in YouTube
And they are saying I need the. Wide angle arms

Exita

I recommend you do the KPI mod.
it's not hard to do and not very expensive + you'll gain variable camber when you steer and great lock angles

you will need:

1. Yokomo Type-C Upper Suspension Arm - from Banzai hobby (link by Pickled)
2. MST I PARTS-wheel hubs 210008 New - from Ebay (link by Pickled)
3. MST CVA wheel axle (2 PCS) 310006 New - from Ebay (link by Pickled)
4. Universal Shaft 46mm:OTA R31 from Broadtech.hk (search : R31-15-46) (link by Eunique)
5. 2 20mm set screws ( I got a set from rcmart for 2.90$)

sorry I can't post links yet but you can do a search with the names I wrote

so it all comes down to 35$ + shipping (if you buy the MST Plastic wheel hubs like I did, the alloy ones are 50$)

pickled

all you need are the wide angle CVD's they are capable of 55* and the stock only 45* but start to chatter about 40*

eunique

iTrader: (3)

Got some practice in today after going back to stock 2.14 CS ratio and like it better...much better than when I started out with this chassis. Center belt seems loose now and will need belt tensioner

Exita

Hi eunique
yesterday I got the 46mm dogbones from broadtech (the link you posted)
they goes great with the MST wheel axles because the head of the dogbone is a bit small
so there is less friction inside. it also gave more steering angle and the wheels almost dont shake at all now. Thanks!

eunique

iTrader: (3)

You're welcome...I'm glad you like it. And glad I could be of help. I'm having a lot of fun with my chassis now and trying to get better at drifting. I'm not a pro and can't even do tandem as I get nervous and crash. I'm just practicing so I can get a better line around the track.

Tristian93

Yeah I have got mine on Order from rcmart
Just waiting for them now

eunique

iTrader: (3)

Did u make sure that they are wide angle? Otherwise, if they are not wide angle, you will still get chatter at full steering lock

Tristian93

EUR$14.531 x 3Racing Ultra Wide Angle Universal Driveshafts for Sakura D3 #SAK-D331 (SAK-D331) = EUR$13.27---------------------------------

eunique

iTrader: (3)

Ok...yes, that's the correct one. For some reason I thought you were ordering Broadtech for the KPI mod

Tristian93

I'm not sure about doing that yet

eunique

iTrader: (3)

No worries...the aluminum steering and UWA will get you wider steering angles and get rid of chatter.

BLOOD_FLUX

well after doing a lot of research and playing with my D3 for a month i thought i should introduce myself and say thanks to everyone here for sharing info on there cars especially the KPI mod.