KO ESC/Servo wiring question
#1
KO ESC/Servo wiring question
I have a KO ESC ( VFS 2000) that I am trying to set up with my Airtronics receiver (Z type). Can anyone help me with the correct wiring for the Airtronics receiver? I have checked several websites and they each list a different color sequence, I dont want to damage the ESC and the instructions included in the box does not mention using anything othere than KO equipment.
Thanks for the help
Thanks for the help
#2
Tech Elite
iTrader: (16)
Black is the ground wire, and on an Airtronics Z type connector you'd want it to go closest to the edge of the receiver nearest the sockets. Red is the positive, it goes in the middle, and white (or whatever the third color is for a KO ESC) goes furthest from the edge of the receiver case. The Z connector wiring sequence should be the same as the KO, Futaba, and JR. Only the older Airtronics used a different wiring sequence in the connectors.
Trips
Trips
#4
Trips
Thanks for the quick reply!! it helped
Thanks for the quick reply!! it helped