R/C Tech Forums - Hobbywing ESC Settings ONLY

Page 19 of 21

Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)

- Electric On-Road (https://www.rctech.net/forum/electric-road-2/)

- - Hobbywing ESC Settings ONLY (https://www.rctech.net/forum/electric-road/497983-hobbywing-esc-settings-only.html)

pierre johnson

02-10-2013 05:00 AM

settings for my hobbywing 1s 120a esc /d3.5 17.5

I wasnt aware of the lcd programing box and bought the programing card but it will not go any further than 10.. I want to program my esc with the super charge firmware but I have to huy the lcd programing box..I tried to use another friends lcd programing box but he already down loaded a program so , he was only able to change my timing to blinky and ,I wasnt able to alter the program of my esc and if so will he have to erase the settings to allow me to race and use the firmware available online...I will order the lcd programing box from hobbyparzt. Monday...

pierre johnson

02-10-2013 03:43 PM

I just ordered my lcd programing box from hobby parzt and hope to have it by tues !!! I would like a race profile for a d3.5. 17.5 maxzilla motor...the superstock sounds cool and anyone you think would be suitable for 1/12th scale car..thanks

slammedwagon

02-28-2013 10:03 PM

hey guys iv got a hobbywing 2 in 1 lcd program box.i downloaded the usb link software from hobbywing onto and now iv just found out i updated it to the wrong version. i needed the v1.63 i believe. is there any way i can reset it? i got a sct pro esc off a mate and my box wont read it.

any help will be greatly appreciated

kosmickid

03-03-2013 04:16 AM

I have the HW 120A Xerun V2.1 running 528MOD. I'm running a Durango DEX410,5.5T Reedy Sonic, track is a high grip medium size outdoor astro turf circuit. Could someone please give me some base line settings for the speedo to get me up and running, throttle, brake, punch, turbo, timing, delay etc etc many thanks

CFRacing

03-25-2013 07:19 AM

hobby wing esc setup only

Quote:

Originally Posted by sizheng (Post 8916993)

Brothers,

I'd like to correct a mis-understanding for the boost and turbo timing.

In program 110119, Cherry's thinking is correct. The turbo timing will be added after the full throttle + delay time, even the boost timing is not added up.

But in the newest program 110211 , the turbo timing will be added after the full throttle + delay time AND + the remaining seconds of boost used up if exists (this is to say, turbo function activation must meet the requirement "ALL BOOST TIMING USED UP")
Since in most situations, boost timing will used up very quickly, so only very little drivers will feel the difference.

do this apply to 930stock as well? Thanks in advance.

mavrickf1

06-16-2013 03:49 PM

I was wondering if anyone can help me, I want to put my HW 1s v2 esc in my touring car out of my 12th car will this be alright with 13.5 turbo up, would this be alright to do.

Still Bill

06-16-2013 06:04 PM

Quote:

Originally Posted by slammedwagon (Post 11876518)

I had the same issue with my HW 1S ESC; but, was still able to change ESC's settings while the 2-in-1 box was also plugged into my computer. My box still acts as the programming conduit between ESC and PC; but, will not program alone (without the PC).

onekiwi

08-29-2014 08:48 AM

Hi all
I just got a HW program box and it has software V1.17_140315

I have never heard of this software and wonder if I can get the V1.08 on there again?

Thanks

baznz

09-22-2014 10:36 PM

hi all looking for a ESC with turbo for 13.5 class

what should I look at

thanks

baz

tobyzhang

10-18-2014 06:30 PM

Have anyone have issue with weak brake with v3.1 on blink software? I think on mod software the brake is very good but I need it for blink and the brake is very weak...

JayL	10-20-2014 09:28 AM

turn reverse all the way to 100.
I know we don't use reverse but for some reason it adds more brakes when set to 100

mine has more than enough brakes in 17.5 and 13.5

tobyzhang

10-20-2014 10:46 AM

Quote:

Originally Posted by JayL (Post 13606021)

turn reverse all the way to 100.
I know we don't use reverse but for some reason it adds more brakes when set to 100

mine has more than enough brakes in 17.5 and 13.5

Thanks, will try that next

asw7576

10-20-2014 08:06 PM

I have Justock 45A ESC with 13.5T motor. It is working okay , no problem at all since new.

My question : is it worth it to upgrade its firmware ?

JayL	10-21-2014 09:47 AM

I setup and tune an F1 with a justock for my buddy and he noticed when I updated the firmware said it was smoother and more brake control

Josh-n-ya

10-22-2014 09:22 AM

Quote:

Originally Posted by JayL (Post 13606021)

turn reverse all the way to 100.
I know we don't use reverse but for some reason it adds more brakes when set to 100

mine has more than enough brakes in 17.5 and 13.5

Hey jay, I have mine set to 100 and I still have no brakes. Having issue with after I calibrate then program esc I cannot turn esc off with button. I have to unplug battery. But then after plugging back in settings are all the same I still have no brakes and esc will shut off with button. Any ideas?

All times are GMT -7. It is currently 11:23 AM.

Page 19 of 21

« First

Show 40 post(s) from this thread on one page