<<( Battery Help )>>
#1
<<( Battery Help )>>
Hey guys, I think you all are the ones to ask advice from regarding batteries, electonics, etc.
My situation is this. I'm racing nitro and need a 6V reciever pack to run the servos. I'd like to ditch the 5-cell pack and use one of my M18 flat lithium batteries that are 7.4V.
Is there something to use or some way to regulate it to 6V?
Any guidance is greatly appriciated.
My situation is this. I'm racing nitro and need a 6V reciever pack to run the servos. I'd like to ditch the 5-cell pack and use one of my M18 flat lithium batteries that are 7.4V.
Is there something to use or some way to regulate it to 6V?
Any guidance is greatly appriciated.
#2
I dont think you need to regulate it at all. A six cell 7.2v pack should run your electronics just fine. The hardest part might be making it fit neatly on the chassis.
#3
can the receiver hold up to 7.2 v ????
#4
That's the thing. In my XXX-S, 7.2 goes through the ESC. In my nitro car, it's straight to the reciever. Which I believe can only take 6V.
#5
7.4v is more than I would ever put into a receiver. 6v max.
#6
Re: <<( Battery Help )>>
Originally posted by kidDynomite
Hey guys, I think you all are the ones to ask advice from regarding batteries, electonics, etc.
My situation is this. I'm racing nitro and need a 6V reciever pack to run the servos. I'd like to ditch the 5-cell pack and use one of my M18 flat lithium batteries that are 7.4V.
Is there something to use or some way to regulate it to 6V?
Any guidance is greatly appriciated.
Hey guys, I think you all are the ones to ask advice from regarding batteries, electonics, etc.
My situation is this. I'm racing nitro and need a 6V reciever pack to run the servos. I'd like to ditch the 5-cell pack and use one of my M18 flat lithium batteries that are 7.4V.
Is there something to use or some way to regulate it to 6V?
Any guidance is greatly appriciated.
I'm trying to knock off weight from the regular 5-cell NiMh, by using a Lithium battery that I normally use on my X-Ray.