Tamiya USA still has them in stock. order it from speed tech or your LHS

I think he's asking where to get the kit not the Alfa body since he got sniped.

@ svines1972

I'm sure Jeff at Speedtech will get more kits soon.

Yes we will!

You can always PM me with the stuff you want me to order/hold for you to avoid getting 'sniped.'

Sorry dude need a chassis for the Alfa.
HPI has a BMW 2002 Turbo for the cup racer.
now we can get a the 2.5 trans am bodys

I'm not sure that BMW body is available anymore, or HPI is out of stock.

does the hpi bmw 2002 fit the mo6 ok?

BMW body was just released and theyre out of stock. It will fit the M06 using 225 wheel base.

can anyone that has one already, answer my question? i need to know how far the rear extremities are from the rear axle centreline, i want to know if this chassis will fit my carson opel kadett c shell!

Just ordered...

1 *Yeah Racing (#WA-014-4mmBU) Aluminum Wheel Washer Set Thick 4mm USD$9.90
1 Tamiya (#53924) DF-03 Heat Sink Bar Set USD$11.50
1 Tamiya (#54183) M-Chassis Rein. Freewheel Axle Set USD$5.40
1 Tamiya (#54268) M-06 Alu. Motor Mount USD$21.90
1 Tamiya (#54269) M-06 Alu. Gearbox Plate USD$21.90
1 Tamiya (#54270) M-06 Alu. Servo Mount USD$6.90
1 Tamiya (#58460) 1:10 M-06 Pro Chassis Kit EP USD$134.90
Sub-Total: USD$212.40
CP(7 to 30 days)>>HK To NO 1 x 2475 Shipping: USD$42.61
Non-Refundable Bank Charge: USD$8.10
Total: USD$261.52

And got a modified 3racing balldiff with ceramic balls, TRF thrust and 2.4mm screw, TRF 54000 dampers, Tamiya M05ra alu upright, Tamiya M05 rear alu upright 1.5 degree, ezrun 13T system and will use Honda S800 and Alpine A110 bodies for it.

No EMS shipping since it won't make any difference during christmas, it will get here in 14 days.

I've ordered some of those option parts& car aswell (except the DF03 heatsink bar set&M-chassis rein. freewheel set) but also:

M03 universal set,M05 ball diff,M05 salu steering set,M06 rear alu upright (2°), M06 titanium screw set, the Alpine body parts set, a set of M&S-grip tires and some Hex head 5mm ball connectors.
And offcourse also a ESC.

I only need some 5mm alu wheel hubs.

All of the items did cost me (including shipping) over USD$400 and hopefully it's worted and it should arrive next week.

RossoTorro and addicted2blue,

And to think I thought I had the mini "Blue Fever"bad!!!!

Lots of luck with your building of your MO6 kits.

Mine arrived today in time for Xmas. Kudos to RC Champ who sent the kits at 1730Hrs 21 Dec and delivered to home address in Sydney 24 Dec 0750 Hrs.

I know what I will be doing tomorrow.

BTW,

Wishing you all a very Merry Xmas and a Happy New Year.

Later,

Calvin.

I have all those new except M06 rear alu upright (2°) and titan screws. Bet i have enough over from M05 to use on M06. I wrote it by memory and no parts infront of me. Only reason to buy the reinforced freewheel set is that i suspect a bent rear axle on my M05. The reason for buying 4mm wheel hubs is that i find the car better to drive with a little smaller track. I used to try to get it as wide as possible before with Tobee 4mm offset axles, when i changed to 4mm the car was sorted!

With the M06 i have all M-chassis from Tamiya. In total 1x M01, 2x M02, 4x M03 (with a couple of R's), 1x M04 and and 3x M05Pro's (1 blue edition).
All cars are maxed out on options, like i do all my cars, nothing is saved. It's as much a pit race as a race on the track...

And good luck Calvin on your build!

11 M-chassis cars and nr 12 on it's way, i guess you can call this an addiction

I have also 1 new build M01 chassis (mini with a gulf paint sheme and was bought for my girlfriend cause she loved the paintsheme).
I have also 2x M-05 chassis (1pro and 1standard that i build up from spares who were replaced by hop-up parts) and now a M-06 on it's way.
That makes 1/3th of what you have of M-chassis cars

I'm hoping the M-06 PRO drives as good or even better then a M05 chassis.
Perhaps i will be buying another M-06 PRO for the M-size chassis with a alfa guillia body, but therefor i will wait for how the M-06 PRO handles.

Merry chirstmas to everyone

Is it confirmed the M06 is able to use a square edge style battery pack?

Yes, it is.