CHoisan any intereste in a 12R6 parts Car? Also Hobbywing makes a nice booster for 1S and its affordable as heck.
AZ Wolfie. maybe you can help i got a pile of parts cars trying to figure what shock goes to which have three associated cars two 12r5 and a 12r66 and a crc.. it was all in a bag. shocks are blue so assume there associated just wondering the overall lengths of each cars center shock so i can see whats here.

Dont know about the motolyser version booster but theres a few options of others available still.

Hobbywing
https://beachrc.com/hobbywing-1s-dc-dc-booster/

Orca
https://www.krazedbuilds.com/shop/el...rca-1s-booster

it is very helpful info. the other day i bought the orca mentioned, it is a 7.4v, the trinity's has a switch to select 6/7.4v, 6v is used for my 6v servo.
thanks so much for the info.

The 6V servo will run on 7.4 just fine. It will be faster at 7.4.

thanks for the advice. understood that it will run faster, friend said it will shorten the servo life. but i will try/do it anyway. cheers

That may have been true when servos weren't all brushless or coreless. There's nothing to wear in a new servo.

Hey, what do you guys think of this car?

Other than the old style pivot ball/football, looks like a capable chassis.

Old style? Is the new one what Awesomatix is using in their A12?

Way too many parts on that car.

Possible means the horizontal type that Xray and Destiny/Zen use now. Less likely to tweak than the old vertical pivots.

Hello, I bought recently 3 CRC Pancar. I never had a CRC car.
Which 3/16" nut driver do you use for the ball stud?
Because the one I use scratch all the ball (the nut drive inside is narrower) and I need to buy a new one.
Can you suggest me the right one to buy?

Oh oh...

If you can find one….
ProTek RC "TruTorque SL" Standard Nut Driver (3/16")

report, don't reply, move on.