Pro 10: 235mm Le Mans Prototype Pan Car Discussion
#799
Tech Elite
iTrader: (9)
I'm not sure why they picked 10.5/1c @ Camarillo (I believe their rules are "OPEN") - but they guys chose that setup - so that's what we run when we join them.
I run OVAL, and I'm a 2c guy - but I've enjoyed the 10.5/1c speeds on the road course - and the setups w/ timing are pretty dang quick on this fairly tight track.
If it was a big open track (like the old RANCH, or REVELATION then 2c / 10.5 for SURE!)
Camarillo gets between 105 and 118 entries on their bi-monthly club races, and NO WGT cars that I've seen. (I don't think the SPEC WGT tires on the narrow chassis cars would do well here personally)
...hey Mike, what were you guys running in 1/12th? 13.5/1c open?
I run OVAL, and I'm a 2c guy - but I've enjoyed the 10.5/1c speeds on the road course - and the setups w/ timing are pretty dang quick on this fairly tight track.
If it was a big open track (like the old RANCH, or REVELATION then 2c / 10.5 for SURE!)
I think if we ran events on tracks like that for nationals (or Freedom Park) you definitely could get a good resurgence among the Pro10 bunch. Itd be cool to have WGT, Pro10, 12th scale and TC as the lineup for an event
...hey Mike, what were you guys running in 1/12th? 13.5/1c open?
#800
Nice looking shells!!
Extra side wings will give you a better handling/ more stable car.
Do you have a chassis pics from those bmi's?
Extra side wings will give you a better handling/ more stable car.
Do you have a chassis pics from those bmi's?
#801
Tech Master
iTrader: (11)
Hey Joe,
Yes we were running 13.5 1s open speedo. Are you and Brian coming down this weekend?
2WD Thank you, I do the paint work for my son and I. I do not have any pics of the chassis but I could this evening. Thanks for the tip I will add the side (spill plates) on before our race this weekend.
Yes we were running 13.5 1s open speedo. Are you and Brian coming down this weekend?
2WD Thank you, I do the paint work for my son and I. I do not have any pics of the chassis but I could this evening. Thanks for the tip I will add the side (spill plates) on before our race this weekend.
#802
Tech Regular
We are planning more races for all this summer long.
#803
Tech Champion
iTrader: (6)
I'm not sure why they picked 10.5/1c @ Camarillo (I believe their rules are "OPEN") - but they guys chose that setup - so that's what we run when we join them.
I run OVAL, and I'm a 2c guy - but I've enjoyed the 10.5/1c speeds on the road course - and the setups w/ timing are pretty dang quick on this fairly tight track.
If it was a big open track (like the old RANCH, or REVELATION then 2c / 10.5 for SURE!)
Camarillo gets between 105 and 118 entries on their bi-monthly club races, and NO WGT cars that I've seen. (I don't think the SPEC WGT tires on the narrow chassis cars would do well here personally)
...hey Mike, what were you guys running in 1/12th? 13.5/1c open?
I run OVAL, and I'm a 2c guy - but I've enjoyed the 10.5/1c speeds on the road course - and the setups w/ timing are pretty dang quick on this fairly tight track.
If it was a big open track (like the old RANCH, or REVELATION then 2c / 10.5 for SURE!)
Camarillo gets between 105 and 118 entries on their bi-monthly club races, and NO WGT cars that I've seen. (I don't think the SPEC WGT tires on the narrow chassis cars would do well here personally)
...hey Mike, what were you guys running in 1/12th? 13.5/1c open?
#805
Put that old wide 235mm 10L together w/ a 10.5/1cell and bring it to a club race @ Freedom Park in Camarillo -
We've been having upward of 10 cars - as many as 13 (and we ALL RUN TOGETHER in the Main)
Couple 10L's - a HPI RoadStar 235mm, but mostly CRC GenX's w/ the 235 width kit and wide BMI cars.
(They do open timing ESC's w/ 10.5, although I SUCK so I stayed w/ no timing until I get better)
We've been having upward of 10 cars - as many as 13 (and we ALL RUN TOGETHER in the Main)
Couple 10L's - a HPI RoadStar 235mm, but mostly CRC GenX's w/ the 235 width kit and wide BMI cars.
(They do open timing ESC's w/ 10.5, although I SUCK so I stayed w/ no timing until I get better)
#806
Tech Champion
iTrader: (44)
www.lefthander-rc.com
For the front end, any three bolt front end currently available will work.
For the rear, some t-plates from other cars will work and some won't. Also check the rear axle hub lengths to see if it will work as most 1/10th parts are for 200mm.
For the front end, any three bolt front end currently available will work.
For the rear, some t-plates from other cars will work and some won't. Also check the rear axle hub lengths to see if it will work as most 1/10th parts are for 200mm.
#807
#808
#810
Tech Regular