The Speed Passion Thread
#4246
Super Moderator
iTrader: (1)
I recommend starting at about 5.5. Keep in mind, a bigger spur will give your more drag brake and more acceleration. A smaller spur will give you less drag brake and a more linear acceleration.
This software is pretty versatile. You will find you can adjust this to your driving needs.
Best of Luck!
This software is pretty versatile. You will find you can adjust this to your driving needs.
Best of Luck!
#4247
Tech Master
iTrader: (5)
Keep in mind if you are willing to use latest Software version,
before installing or uninstalling the software :
1) you must be administrator no matter XP or Vista you are using.
2) you must use the same last software to change the firmware first to the
basic firmware , ex: change it into 205g firmware first (back to old).
then :
3) install or uninstall the software ( PC Interface ).
4) install the new or latest Software (PC Interface).
5) "Upgrade" Esc, into the latest firmware ex: 422 or 323 Firmware.
above steps is a must if you are changing the PC Interface to detect your Firmware ESC or LCD Programmer, as Old Firmware.
it's never fail and quite safe and succeed.
hope it will help a lots.
before installing or uninstalling the software :
1) you must be administrator no matter XP or Vista you are using.
2) you must use the same last software to change the firmware first to the
basic firmware , ex: change it into 205g firmware first (back to old).
then :
3) install or uninstall the software ( PC Interface ).
4) install the new or latest Software (PC Interface).
5) "Upgrade" Esc, into the latest firmware ex: 422 or 323 Firmware.
above steps is a must if you are changing the PC Interface to detect your Firmware ESC or LCD Programmer, as Old Firmware.
it's never fail and quite safe and succeed.
hope it will help a lots.
#4248
Tech Apprentice
I recommend starting at about 5.5. Keep in mind, a bigger spur will give your more drag brake and more acceleration. A smaller spur will give you less drag brake and a more linear acceleration.
This software is pretty versatile. You will find you can adjust this to your driving needs.
Best of Luck!
This software is pretty versatile. You will find you can adjust this to your driving needs.
Best of Luck!
so with a 13.5t and 422 software you recommend starting at 5.5 FDR and everything on default settings ?
#4249
5,5 FDR is in my opinion to low, now I use 8 FDR with 230 i used 8.6, it does run a little colder now but better to have 15C as a safty margin then burning your motor in my opinion
#4251
Tech Apprentice
Hi guys, has anyone else experienced problems with the mod 205
software on v1.33 or has it been that one incident on last page.. Mine seems ok but if other people have had probs with it I'll install v1.32 again and use the old version, as when I run it at weekend I won't have the option to change it trackside
mine appears to be fine, but that earlier post bout it has made me doubt it
software on v1.33 or has it been that one incident on last page.. Mine seems ok but if other people have had probs with it I'll install v1.32 again and use the old version, as when I run it at weekend I won't have the option to change it trackside
mine appears to be fine, but that earlier post bout it has made me doubt it
#4252
Tech Addict
guys, take my word for it.....if you run a high fdr, i strongly advise you to go down to your local electronics parts store, buy a 40 mm, 5 volt fan, and wire it directly into your battery. attach it to your car's motor, either directly or on a heat sink. that way you have peace of mind and you won't overheat your motor. believe me, it works.....
#4253
It ran about 30C cooler with 422 compared to 230 with same settings and for sure if I had started on 5,5 I would have blown my motor for sure
#4254
actual race results using Speedpassion software 100422 and a Speedpassion Stock Spec 2.1 ESC, and a Speedpassion V3 17.5.
look for the expert 17.5 class, name Ritchie
http://www.fantasyworldracing.com/in...=107&Itemid=58
you can find all three qualifiers, I did not run the main as it started to rain.
on the web site, if you look under the 'media' tab you can find videos of the size of track we run. the layout for the above results is not shown.
look for the expert 17.5 class, name Ritchie
http://www.fantasyworldracing.com/in...=107&Itemid=58
you can find all three qualifiers, I did not run the main as it started to rain.
on the web site, if you look under the 'media' tab you can find videos of the size of track we run. the layout for the above results is not shown.
#4255
Tech Rookie
Well just an update .............. still cannot get the speedo to rev up above about half throttle after updating it to 205 mod !!
I have recalibrated the transmitter numerous times.
Irgo I cannot roll back the software to original because when I try to use 1.32 to put it back to 205g a warning message comes up and says "cannot upgrade 205mod to 205g or 323"
I am sooooo stuck I feel like hitting speedo and program card with a hammer!!!
Total frustration here.
Looking like I will be sending it back to China !!!
AAAaaaaaaaaaaagh !!!!1
I have recalibrated the transmitter numerous times.
Irgo I cannot roll back the software to original because when I try to use 1.32 to put it back to 205g a warning message comes up and says "cannot upgrade 205mod to 205g or 323"
I am sooooo stuck I feel like hitting speedo and program card with a hammer!!!
Total frustration here.
Looking like I will be sending it back to China !!!
AAAaaaaaaaaaaagh !!!!1
#4256
Tech Champion
iTrader: (4)
Call Shawn at 866-369-0636 at Speed Passion USA
Well just an update .............. still cannot get the speedo to rev up above about half throttle after updating it to 205 mod !!
I have recalibrated the transmitter numerous times.
Irgo I cannot roll back the software to original because when I try to use 1.32 to put it back to 205g a warning message comes up and says "cannot upgrade 205mod to 205g or 323"
I am sooooo stuck I feel like hitting speedo and program card with a hammer!!!
Total frustration here.
Looking like I will be sending it back to China !!!
AAAaaaaaaaaaaagh !!!!1
I have recalibrated the transmitter numerous times.
Irgo I cannot roll back the software to original because when I try to use 1.32 to put it back to 205g a warning message comes up and says "cannot upgrade 205mod to 205g or 323"
I am sooooo stuck I feel like hitting speedo and program card with a hammer!!!
Total frustration here.
Looking like I will be sending it back to China !!!
AAAaaaaaaaaaaagh !!!!1
#4257
Super Moderator
iTrader: (1)
oh right cool , when i was running 110 software i was running at about 5.5 FDR and the supercharger software i was running around 7 FDR , thats why i was wondering where to start from ?
so with a 13.5t and 422 software you recommend starting at 5.5 FDR and everything on default settings ?
so with a 13.5t and 422 software you recommend starting at 5.5 FDR and everything on default settings ?
#4259
Tech Adept
actual race results using Speedpassion software 100422 and a Speedpassion Stock Spec 2.1 ESC, and a Speedpassion V3 17.5.
look for the expert 17.5 class, name Ritchie
http://www.fantasyworldracing.com/in...=107&Itemid=58
you can find all three qualifiers, I did not run the main as it started to rain.
on the web site, if you look under the 'media' tab you can find videos of the size of track we run. the layout for the above results is not shown.
look for the expert 17.5 class, name Ritchie
http://www.fantasyworldracing.com/in...=107&Itemid=58
you can find all three qualifiers, I did not run the main as it started to rain.
on the web site, if you look under the 'media' tab you can find videos of the size of track we run. the layout for the above results is not shown.
On a side note what are you outlining your track with?
#4260
Well just an update .............. still cannot get the speedo to rev up above about half throttle after updating it to 205 mod !!
I have recalibrated the transmitter numerous times.
Irgo I cannot roll back the software to original because when I try to use 1.32 to put it back to 205g a warning message comes up and says "cannot upgrade 205mod to 205g or 323"
I am sooooo stuck I feel like hitting speedo and program card with a hammer!!!
Total frustration here.
Looking like I will be sending it back to China !!!
AAAaaaaaaaaaaagh !!!!1
I have recalibrated the transmitter numerous times.
Irgo I cannot roll back the software to original because when I try to use 1.32 to put it back to 205g a warning message comes up and says "cannot upgrade 205mod to 205g or 323"
I am sooooo stuck I feel like hitting speedo and program card with a hammer!!!
Total frustration here.
Looking like I will be sending it back to China !!!
AAAaaaaaaaaaaagh !!!!1
I found rolling back to HW software was easier to do than SP software.
When i had a hassle i rolled back to HW V1.5 and then reinstalled SP1.32 .