R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric On-Road (https://www.rctech.net/forum/electric-road-2/)
-   -   The Speed Passion Thread (https://www.rctech.net/forum/electric-road/288105-speed-passion-thread.html)

clfile 05-20-2014 10:02 PM


Originally Posted by Solara (Post 13278212)
Please try reinstall the V25 again....its fixed. I tested it. And the within STOCK1 is version 22, which is used by Viktor Wlick at ETS round 3 and he is using it at the REEDY RACE this weekend.

:tire:it worked, tks.

dan_vector 05-21-2014 01:13 AM

I'm having a bit of trouble getting my stock club race connected to the PC software to update it's firmware. It's currently at V19. I can successfully connect the LCD box to the esc and make adjustments and I can also happily connect my reventon 1.1 to the PC without issue. When I connect the club race it fails to connect to the PC. I'm using latest 25 version of the PC software. Any ideas? Or is this esc not supposed to connect to PC?

Zonk 05-21-2014 05:16 AM

Well for less than 110.00 shipped had to try it :)

Nexus 05-21-2014 07:12 AM


Originally Posted by Zonk (Post 13278467)
Thanks for the answer. Would the 7.5t V3.0 motor be a good replacement for a very tired :) Novak motor in 4wd buggy ? Special rotor needed for offroad ?

Is the capacitor included ? Sorry about all the questions

That motor should be plenty. The V3.0 is still a very popular motor to run with our Pro drivers.



Originally Posted by Zonk (Post 13278935)
Well for less than 110.00 shipped had to try it :)

Awesome.

Zonk 05-21-2014 08:15 AM


Originally Posted by Nexus (Post 13279142)
That motor should be plenty. The V3.0 is still a very popular motor to run with our Pro drivers.

I'm no pro so it should do me just peachy lol. Excited to try it out :nod:

Qatmix 05-21-2014 10:20 AM


Originally Posted by Solara (Post 13278218)
Sorry, we feel that using reverse on blinky mode is not the best to do on any kinda of racing environment. If you want to use reverse, you can choose to use MOD0 version and turn off all the timing. However, that does not mean it will be equal to blinky and is not legal to race on any no timing, blinky required event...

Thank you for responding

Unfortunately that's the reason why the Fleta / Hobbywing esc's are now the ones that racers at local clubs racers are considering. What problem is with having the option to select this? when all of the rival ESC's allow this? It is much easier for the average club racer to have reverse, and then switch it off when at a large event.

Solara 05-21-2014 11:35 AM


Originally Posted by dan_vector (Post 13278688)
I'm having a bit of trouble getting my stock club race connected to the PC software to update it's firmware. It's currently at V19. I can successfully connect the LCD box to the esc and make adjustments and I can also happily connect my reventon 1.1 to the PC without issue. When I connect the club race it fails to connect to the PC. I'm using latest 25 version of the PC software. Any ideas? Or is this esc not supposed to connect to PC?

Stock Club Race does not allow any computer connection, it was design it that way so it will fulfill several class rules by not allowing any software alteration. Please use the LCD or LED programmer box for perimeter adjustment.

dan_vector 05-21-2014 09:56 PM


Originally Posted by Solara (Post 13279706)
Stock Club Race does not allow any computer connection, it was design it that way so it will fulfill several class rules by not allowing any software alteration. Please use the LCD or LED programmer box for perimeter adjustment.

Thought it might something like that. I checked the manual and I couldn't find a statement which told me so which is why I asked here. Forgive me if it is in manual I just couldn't see it!

syndr0me 05-21-2014 10:01 PM

Where can I pre-order a blue v4 5.5? :)

latentspeed 05-22-2014 12:59 AM

For the team drivers and anyone else who knows anything about the new 4.0 motors, what is the power band like? Improved punch off the line I hope.

LOSI123 05-23-2014 03:35 AM

Can anyone tell me if the Reventon R Esc will be ok for running a 10.5T with boost in a 4wd buggy? and do the Reventon Esc's work ok with tekin gen2 motors as that what i already have etc... Im asking as the old cirtix stock club esc I had would'nt work with novak motors etc i think it was back then... cheers

Zonk 05-23-2014 05:16 PM

Got my combo today and it looks great, oh btw fast shipping guys ! Cant wait to try it out next week

Just realized I had been posting in the onroad thread lol, sorry guys my bad

Tyler Price 05-23-2014 09:57 PM

Running without the fan??
 
Hey guys I picked up a Speed Passion Reventon S for my Losi 22. I see alot of guys are running them without the fan. Is that okay? Is so big bolkey i'd prefer to run without it long as temps don't get up. If someone could clear this up it be very much appreciated. Thanks, Tyler

Nexus 05-24-2014 06:44 AM


Originally Posted by Tyler Price (Post 13285541)
Hey guys I picked up a Speed Passion Reventon S for my Losi 22. I see alot of guys are running them without the fan. Is that okay? Is so big bolkey i'd prefer to run without it long as temps don't get up. If someone could clear this up it be very much appreciated. Thanks, Tyler

Most if not all the drivers I've seen and spoke with do not run fans in 2WD BUGGY. mod or stock.

xrayracer1 05-27-2014 05:39 PM

Reventon pc interface won't work
 
Ok, I'm about a snowflake in a snow storm away from roundhouse kicking my laptop across the room.

I've re-installed the program twice and it still won't recognise my SP Reventon pro 1.1! Every time I connect it to my laptop, it all lights up but my laptop makes a noise notification that is not the same as when you usually connect the usb.

What the hell am I doing wrong??????:flaming::mad::confused:


All times are GMT -7. It is currently 03:08 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.