|
Originally Posted by Marcos.J
(Post 11380510)
there is another version getting tested now that you can fine tune the rpm/ramp/degrees,and custom %on boost , no word if is final or not but the 5711 is very good and easy to set up.
|
Originally Posted by Chris kal
(Post 11380573)
Cool thanks ill try it and go form their.
|
Originally Posted by Marcos.J
(Post 11380510)
there is another version getting tested now that you can fine tune the rpm/ramp/degrees,and custom %on boost , no word if is final or not but the 5711 is very good and easy to set up.
|
Originally Posted by RSCosworth
(Post 11380627)
If it is final then i cant wait. What about a read out on the program box that tells you the motors temperature and its highest rpm?
The programmer box can only read the CURRENT ESC temp and the lipo voltage, will not be able to read the MOTOR TEMP as we disabled that feature due to the conflict of the ESC thermal protection. Good old temp gun on the black spot of the motor will work... As well as motor highest RPM...isn't that everyone want to see that..? Are you willing to mount a 500grams data logging device on the car and screw up the weight balance...? |
Originally Posted by Solara
(Post 11380888)
It will never be final....once we have that done, we will post it on the site, then we will move on to something better and faster. Our driver never satisfied to just 1 stage of the products. We are changing the software bi-weekly.
The programmer box can only read the CURRENT ESC temp and the lipo voltage, will not be able to read the MOTOR TEMP as we disabled that feature due to the conflict of the ESC thermal protection. Good old temp gun on the black spot of the motor will work... As well as motor highest RPM...isn't that everyone want to see that..? Are you willing to mount a 500grams data logging device on the car and screw up the weight balance...? |
Originally Posted by RSCosworth
(Post 11381019)
The hobbywing V3's program box reads the motors highest rpm...............?
|
Originally Posted by Timbo99
(Post 11379981)
What Reventon?
Software version? Motor turn? I've had a Reventon pro with v18 hybrid boost,4.5 X12,not us much grunt as the mmm motors. ( using identical settings btw ) |
Originally Posted by roger999
(Post 11381150)
Well, Reventon R, LRP 10.5 stock. What software not sure yet, will get speedo in few days. Probably will try new one v19 and older v18 as well...
|
Originally Posted by Marcos.J
(Post 11381073)
Wow well let's give hobby wing a cookie
|
I need an LCD program box to setup with my reventon r (dont wanna carry my laptop around to the track) Since the LED card is hard to read the item and value. Is it available to buy seperately and where can i buy it?
|
Originally Posted by RSCosworth
(Post 11381359)
There's no need to give me attitude. I was merely stating a fact with a sudgestion.:flaming:
|
Originally Posted by vr6cj
(Post 11374762)
Radio is a Airtronics MT4 and esc operates together fine. I actully ran it last night in 17.5 blinky mode and Tq'd but the simple problem is this.... I cant turn it off nor can I calibrate it since installing the new v19 software.
The esc will turn on but wont turn off nor calibrate now with the setup button. Sidenote: I have tried reinstaller v18 and still does same thing. So I put v19 back on it and same issue no change. Does it need sent in? |
Solara, just send you a pm, please let me know thanks!
|
Originally Posted by kunming
(Post 11381442)
I need an LCD program box to setup with my reventon r (dont wanna carry my laptop around to the track) Since the LED card is hard to read the item and value. Is it available to buy seperately and where can i buy it?
|
.
|
| All times are GMT -7. It is currently 09:06 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.