Followed the vid, but the part after the usb driver install, where the arrow hovers over the spusbinstaller. Not sure how that window pops up like the video where it says "installing device driver software", Happens, but it doesnt.
Im stumped.

I had the same issue with my pc I ended up using a different computer with vista :)

Have you tried running the app in Winxp SP3 compatability mode ?

No, but I'll try that. You can "here it connect" when I plug the LCD card to laptop, but nothing pops up on Reventon interface.

weird as if i put stock01 on the r it shows me a starting point setting for every motor from4.0t-21.5t when i just tried the pc softwear ?

you just select the motor you are running and that gives you parameters

no u link the esc to the pc go to settings hit the hybrid boost button and it shows you and gives you a starting point for each motor the just click into say 13.5t and you get all the options (only give you starting point for hybrid boost active and hybrid boost maximum no fdr)

for the programmer try pressing the value button (second along)as you plug it into the pc usb, as with the r you have to do this and you get pc on the display of the programmer, worth a try, i know the pro comes with the better programmer

Bluetooth module with Stock2.1
 

Hey guys,
Updated to 2.1 hybrid boost etc etc....but my android device won't bring up setting options.It recognises the new software on the esc but that's it.
No big deal as I can use my LCD programmer,just want to know if there is a smartphone update soon.
Reventon pro
Mmm 10.5
HTC sensation xl
Bluetooth adaptor
Thanks,
Tim
This esc is superb.

I read somewhere that there will be an update for the Apple and Android devices within a few weeks, Not sure if that is the fix or if someone else can help you further.

Thanks trickedout,that kinda sounds right to me,I thought I read it somewhere too.
Appreciate the reply:)

This is the V17 Update Downloads section !!

Well tried it again with no victory.:( Tried diff compatabilities. Ran as admin. I do notice that after I d/l driver 6.6 that I don't get that window pop up like in the video after the video says next..:confused:

Anyone out there running this on Windows 7?

LCD card works fine w/speedo.

I can hear the usb plug into card.

I'm stumped.:confused::(

Ok.
Go to your user control panel,select add remove program's.
Get rid of what you have downloaded,restart pc.
Go to speedpassion,download the interface/ program.
Get hold of another pc/ laptop/phone or whatever and follow that video to the letter.
Then at the end you update the LCD programmer by holding in the reset button AND plugging into USB port.
It will then say on the programmer " UPDATE FIRMWARE"...click "yes".
It will take approx 4-5 minutes.
And yes I'm running windows for this process.
If it doesn't work,we will have to organise a Skype conversation so I can show you how to do it.
Or I'll fly over...LOL
Good luck,let me know how you go.

Wipe that pc first!!!!!
Regards
Tim Phillips
Mobile: 0416973325