Call our office first....Phone 1-888-928-1328 and ask our office for RMA process.

your ok , were all here to help , Solara will be along soon for the US address , i live in Europe

So of the speed passion ESCs that are legal for Blinky mode, which of these can work off of just 1S without the voltage booster other than the GT2.0?

Will do thanks guys!

Have recently purchased the GT 2.0 pro speedy and I am using it ATM for stock spec 13.5 racing, my question is this, are racers using the 230 stock SP firmware or are the new Hobbywing versions better/ worse?

What kind of temps does a 21.5 mmm motor like for TC onroad with a cirtix spec speedo
Thanks

Hi

The latest software is best , and asking if a HW or SP software in the speed passion thread will only get you one answer :lol::lol:

Upgrade your speedo and it will open your eyes haha

Just asking the question as running the same settings and motor as a mate with a Hobbywing speedy, he was around 5-10 degs cooler after every run

now i have a understanding on all the setting on my speedy my motor temps are around 60 degrees now with plenty of punch and speed :).

we have the nationals here at the moment in Australia im sorry to say i thought i would try a new lrp motor and i was having problems with temps and speed i thought they were very ordanary (crap) i sold all 3 for new for $50 :lol:

went back to V3 SP and tems dropped 40-50 degrees rock on SP ! :nod:

Hi, need advice: run gt pro with 1S on 1/12 with 5T motor. What about power cap? Must use it? Can i use 1100uf power cap?
Thanks

The GT2.0 can't. Only the 2.1 EX can.

Yes it can , I am using the GT2.0PRO in my 1/12th WITHOUT booster

Can I run my Speed Passion GT2.0 LPF on a 1S 3.7v Lipo for my 12th scale car?

The manual suggests 4.8v 4 Cell NIMH as a minimum.

Any ideas?

Hey Guys,

Its time for a new 17.5 to run boosted in my TC...

I did a quick search on this thread and found that the 1cell is a little better then the normal v3.... How does it compare to the MMM in the boosted classes? I like the weight of the 1cell... are they more fragile? ie will they smoke :lol: Where I run we often get motors 70-80 degrees C (Large outdoor track plus its summer... Track temps up around 60deg C)

Its important that my next motor can handle the abuse... I'm yet to smoke a motor

yes it will be perfect