The Speed Passion Thread
#7456
Tech Fanatic
iTrader: (11)
With the driver stand in the middle of the 280 meter long track , you will not be able to see the end of each side 140 meters away ! Take you tape and re-measure the track, buddy !!! Even a 280 foot track is too big for 8scales !!!! Any track above 250 feet long is not practical !!! Get your facts straight !!!
ie, 280m is how far the car would travel per lap
#7458
you can use the prostock (comes in black or blue) and the 323 program. this esc is made for boosted 17.5 class. the gt2.0 works just as good too.
#7459
#7460
t-i-a
#7461
Tech Apprentice
#7462
Tech Champion
iTrader: (17)
With the driver stand in the middle of the 280 meter long track , you will not be able to see the end of each side 140 meters away ! Take you tape and re-measure the track, buddy !!! Even a 280 foot track is too big for 8scales !!!! Any track above 250 feet long is not practical !!! Get your facts straight !!!
Last edited by Solara; 07-13-2011 at 09:21 AM.
#7465
Tech Apprentice
Tnx for the answer! if i have understand it right 205G software is installed as standard in my new gt 2.0 pro?
Last edited by MarcusEngdahl; 07-13-2011 at 08:12 AM.
#7468
Tech Champion
iTrader: (17)
OK...your ESC is probably 2+ years old. Contact Speed Passion USA and let him know you have the old lower case, we have the smoke clear version of the GT2 Pro bottom case for you with the ESC decal....just pay shipping and he will take care of that for you. With that bottom case, you will see the red LED blinking light from the bottom/side.
#7469
Response?
I've been racking my brain trying to help a friend with a silver arrow esc and 5.5 motor combo.
after reading just about everything i can find this is what I have come to understand and need carification.
running this system on 2s will not work, "If using 2 cells lipo powered vehicle, please use our GT2.0 Pro series ESC."
running this system on 4s will not work "Support up to 4 cell lipo with 3000KV motor." the SP 5.5 SCT motor is 3905kv
"Silver Arrow II ESC is best to be used on 3 or 4 cells lipo power"
so the only way to run the esc/motor combo as sold is with 3s, I'm assuming this as I don't have a 3s lipo to test with.
So I'm also gonna assume that if I install a GT2.0 esc and this 5.5 SCT motor on 2.s it will be ok.
at this point the esc is useless unless he buys a smaller motor, which I already know hes not going to do. can I send it in for credit towards another Pro 2.0 esc? you guys are pretty much giving them away on the web site so trying to sell it is mute.
edit, ok so i wired up a pro 2.0 (on 2s) to the motor and apparently its hurt, no rpm whats so ever and after a couple of trigger pulls the red and green lights flash on the esc. (it also did this with the silver arrow esc and 4s)
after reading just about everything i can find this is what I have come to understand and need carification.
running this system on 2s will not work, "If using 2 cells lipo powered vehicle, please use our GT2.0 Pro series ESC."
running this system on 4s will not work "Support up to 4 cell lipo with 3000KV motor." the SP 5.5 SCT motor is 3905kv
"Silver Arrow II ESC is best to be used on 3 or 4 cells lipo power"
so the only way to run the esc/motor combo as sold is with 3s, I'm assuming this as I don't have a 3s lipo to test with.
So I'm also gonna assume that if I install a GT2.0 esc and this 5.5 SCT motor on 2.s it will be ok.
at this point the esc is useless unless he buys a smaller motor, which I already know hes not going to do. can I send it in for credit towards another Pro 2.0 esc? you guys are pretty much giving them away on the web site so trying to sell it is mute.
edit, ok so i wired up a pro 2.0 (on 2s) to the motor and apparently its hurt, no rpm whats so ever and after a couple of trigger pulls the red and green lights flash on the esc. (it also did this with the silver arrow esc and 4s)