any one know if u can run sensorless motors with the speedpassion gt pro 2.0?

It will run in sensorless mode, my sensor wire came loose during a race and the car still ran but not as smooth and no timing. Run a sensored motor if you want full potential of this esc. :nod:

The beauty of the BOOST/SC is...you can run a slower motor and take advantage of the low-end power (usually, slower turn motor has better low-end power...usually). but with the software enhanced, it will BOOST the slower motor in a short period of time when it is needed, just as fast as a lower turn motor...of course, everything has a limit, you cannot BOOST a 17.5 motor up to 4.5T rpm or we will never have any MOD or STOCK racing....everything will be stock or everything will be MOD.

For example...depends on the size of the track, you will find 13.5 motor lap time is within 0.5 sec per lap slower then a full mod motor lap time. 2-3 years ago, that is not the case...MOD is always faster by alot.

It is a good stock sportsman motor....

Are you saying you want to run it with 4.45 final drive..? Depends on what software you are running...for no timing, I think you can OVER GEARED. For full boost software...you are WAY WAY WAY over geared....

But if you are drag racing for a short period of time...I think it is OK.

i ran the new softwere today in my T3 with 6.5SPv3 motor

:lol::lol::lol::lol::lol:wheel spin along the straight it was crazy fast

I used the 10.5 set up and turned it down a little , it was really powerfull and not too warm , it was at 70 degreesC after 5 mins without fan the speedo was 80 without fan , i have now put a fan on it :D:D:D

I outrun anything with my 1/12 scale Serpent car with Hobbywing 1S ESC except for 1 Tekin guy, so stop comparing ESC's....
Driving and car set-up skills come into play also, and my feeling of the electro world is that drivers always only are blaming the ESC if they are not fast enough.... :rolleyes:

bla bla bla ..... we were just having fun offroad !!!!!!

good luck with your 1/12th scale this winter we now have Speed passion softwere to compair with other stock softwere :sneaky::sneaky: see you at MACH indoor in the winter

And because this is the SP thread, you are off course allowed to bash any other brand if you want, I understand... :D

Yep, looking forward Phil in comparing our firmware, but... again, driving skills come into play. :sneaky:

There is nobody as fast as John with his GM powered car, but again, those driving skills (or the lack of them) are killing his laptimes.... :lol:

not bashing anyones speedos , i still run a Tekin in my 4wd , it is great but I find the speed passion is smoother , i think we need to catch RobertK ;)

see ya in the winter

wat is your f.. problem?only reacting on me! got a problem with me?
just joking around. we now the tekin guy so!

and my speedpasion is faster as your hobbything! lol

Solara, updated both my speedo's /me like :D

Thanks again for you support.

:lol::lol::lol::lol::lol::lol::lol:

am running SP GT2.0 on my 12th on 1S batt.
is there a new FW that would work really well with V3 SP 4.0T motor? base set-up would be greatly appreciated

currently running 508MOD FW but am having ESC thermal at end of 8 min run. If i tone down timing (DMTS) to get cozy temps after 8-min run, i feel its too slow down the straight.

Me LIKE you LIKE.....:nod: