Going to post the setup sheet this weekend, I got side tracked last night and I won't be around tonight.

That was a Team Orca ESC, but I no longer run for them. I should be taking my maiden voyage on Speed Passion equipment on Wednesday :D

-Korey

See...and I could have made you a "T Special" at the Nats...You could have WON! LOL

Hey quys quick question. Is the latest firmware for stock with timing advance and SC, V2.0_100422STOCK? If not how do I go about getting a newer version? Thanks :)

No, it's 528_STOCK and you can download it from Speed Passion's web site.

Speed Passion Stock Firmware mid 2010
 

acctually there was 2 type of Stock Software from Speed Passion
1) is Stock based Advanced Dynamic Timing (only) (3ver).
2) Stock Software Advanced Dynamic TIming with Supercharge (Timing)
with 2 type of Firmware 100422 and 100528. 2010/04/22 and 2010/05/28.

..

KK I found it under downloads for my speed control. It says this one the download though:

Program

Speed Passion USB Interface software V1.33 and software #100528
This for GT2.1 Prostock only !
You must use the new PC interface V1.33

Not being one to worry much, I threw it on my speedo anyways. It updated fine, should I be concerned or will it work fine?

PS: I have the gt2.0 LPF

try to ask again:)
has sombody tryed the gm motors 13.5t on the sp speedos with stock software.

or do you now motors that didnt work on stock software.
i dith test the team powers 13.5 and it was not great.
alot of heat in it. had to turn down the setings and it was not fast with the setings down but cooler.
with the same setings as with my 13.5 sp motor it was fast but hot after 2 min.

I'm using a Fantom 17.5 and I can put all the boost settings on high max punch and everything with a 25/75 gearing with a 2:6:1 ratio and it runs perfect.

altreyx whenever I try to print from this pdf it generates an error message about the file being encryted and just creates a log file. I put the contents of the log file into a word document since this forum doesn't allow the attachment of .log files. Thanks

sounds to me you might want to drop #15 1 or 2 and/orlower fdr
and the only motors that ive heard dont sc sp is lrp vector x11/x12 havent heard of any others

Fear not, it's okay to use it on that speedo. Since I primarily run Mod I've got GT 2.0's in both my cars and I'm using 528Stock on one of them for IIC. Been running 528Stock for about 3 weeks not without any issues.

my sheets are encrypted, i don't know the program that you are using (distiller??) Try to use Acrobat Reader 9.xx or Foxit Reader 4.1. I have both and both are working. Foxit is free and very small respect Acrobat Reader. Sheets are build for to be compatible with the 9,xx version of Acrobat reader or above. A friend of mine had a similar problem with a PC...and with the exactly the same software on another pc was working. I suggest you to try Foxit , it is small about 10Mb and is full compatible. Hoping this can help you otherwise contact me by pm and will try to solve this issue :)

SC Punch #15
 

.. found the answer

now betraying my memory ..:cry:

What was it now. the solder to the capacitor esc. it was red to battery ( + ) and black to the battery ( - ) ?:confused::blush::cry: