|
Originally Posted by irgo
(Post 6077621)
ok, my mistake then, i was just looking for the truth.
my next question is : CAR_ESC HW407_V1.2 CAR_ESC HW407_V2.0 CAR_ESC HW419_V1.0 CAR_ESC HW427_V1.0 CAR_ESC HW429_V1.0 which one is the GT1.1 and GT2.0 |
Speedpassion GT2.0 possibilities
Originally Posted by abailey21
(Post 6077990)
None of those are the Speed Passion 1.1's or the 2.0's
V1.00_080802A-U V1.01_080927a_U@ V1.01_080927a_U V1.01_080927b_U V1.01_081121a_U V1.01_090210a_U V1.01_090210b_U V1.01_090310b_U V2.00_090310a_U V1.00_080721b_U V1.01_080927a_U@ V1.01_080927a_U V1.01_090309a_U V1.00_080926a_U V1.00_081014a_U V1.00_081017a_U V1.00_081025a_U V1.00_081105a_U V1.00_081206a_U V1.00_081218a_U V1.00_081231a_U V1.10_090105a_U V1.10_090115a_T V1.10_090205a_T V1.10_090205b_T V1.10_090205c_T V1.10_090205g_w V1.10_090205f_T V1.10_090205g_T V1.10_090312a_T V1.10_090323a_T V1.00_080927a_U V1.00_081008a_U V1.00_081013a_U V1.00_081020a_U V1.00_081122a_U V1.00_081218a_U V1.00_090115a_U V1.00_090311a_U Or maybe any of this is GT1.1 or GT2.0 can you help and tell us the differences? |
Originally Posted by irgo
(Post 6077540)
See that !, older version will be working anyhow by upgrading that's why GT2.0 Will work's on "CAR_ESC ADVANCE" which had "motor type" dameetz can you try switch GT2.0 with Brushed ? but be careful with motor wiring. |
Originally Posted by dameetz
(Post 6078648)
As Adam says 2.0 will not/cannot be run with brushed motors. I wouldn't dare to try and neither do I have any intention to run brushed motor with it.
|
Originally Posted by abailey21
(Post 6078920)
I think this dude is just getting out of hand at this point lol
|
Originally Posted by kidsid99
(Post 6079006)
I think he just likes talking to you. Why don't you give him your #.:nod:
|
My gt2.0 top broke off and now longer works. I have only had it for maybe 2 month. Can I send it in for repairs. If so where and will it be fixed for free since I have not had it that long.
|
Originally Posted by xraysteve
(Post 6079642)
My gt2.0 top broke off and now longer works. I have only had it for maybe 2 month. Can I send it in for repairs. If so where and will it be fixed for free since I have not had it that long.
Email me the details of what happened and I'll send you the address info for warranty |
Originally Posted by abailey21
(Post 6079154)
I gave you my number and look how much of a mistake that was:lol:
|
Speedpassion GT2.0 possibilities
Originally Posted by dameetz
(Post 6078648)
As Adam says 2.0 will not/cannot be run with brushed motors. I wouldn't dare to try and neither do I have any intention to run brushed motor with it.
Originally Posted by abailey21
(Post 6078920)
I think this dude is just getting out of hand at this point lol
Im not talking about brushed here. V1.00_080802A-U V1.01_080927a_U@ V1.01_080927a_U V1.01_080927b_U V1.01_081121a_U V1.01_090210a_U V1.01_090210b_U V1.01_090310b_U V2.00_090310a_U V1.00_080721b_U V1.01_080927a_U@ V1.01_080927a_U V1.01_090309a_U V1.00_080926a_U V1.00_081014a_U V1.00_081017a_U V1.00_081025a_U V1.00_081105a_U V1.00_081206a_U V1.00_081218a_U V1.00_081231a_U V1.10_090105a_U V1.10_090115a_T V1.10_090205a_T V1.10_090205b_T V1.10_090205c_T V1.10_090205g_w V1.10_090205f_T V1.10_090205g_T V1.10_090312a_T V1.10_090323a_T V1.00_080927a_U V1.00_081008a_U V1.00_081013a_U V1.00_081020a_U V1.00_081122a_U V1.00_081218a_U V1.00_090115a_U V1.00_090311a_U any of this is GT1.1 or GT2.0 can you help and tell us the differences? |
Just purchased 2 of the GT 2.0 pro speed controls. Looking to find out more info about the 3.7 LiPo I will be running? Does the speed control have a lipo option cut-off? Just wondering. I'm running the new 3.7 5000mah Thunder power cell. Any suggestions? Oh and I'm running the 13.5 Trinity DUO also. Thanks for the help.
|
Set the punch, drag, NW, etc to your personal preferences. I run indoors on carpet 100x60 and here's what I ran
0 timing hole on motor 6 punch full timing in esc TQ booster esc off 75 mm rollout That should be a pretty good starting point. There isn't a lipo cut-off for 1 cell afaik. Even if there was, with the esc turned off it wouldn't work. If you find differently I'd love to hear! :) |
Originally Posted by andrewdoherty
(Post 6082573)
Set the punch, drag, NW, etc to your personal preferences. I run indoors on carpet 100x60 and here's what I ran
0 timing hole on motor 6 punch full timing in esc TQ booster esc off 75 mm rollout That should be a pretty good starting point. There isn't a lipo cut-off for 1 cell afaik. Even if there was, with the esc turned off it wouldn't work. If you find differently I'd love to hear! :) |
1 Attachment(s)
|
Is there any new SP brushless motors coming soon?
|
| All times are GMT -7. It is currently 04:36 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.