|
Originally Posted by mutley001
(Post 7129744)
I run windows vista home premium too and had the same issues, after doing everything as instructed.
To get this to work all I did was to right click the speed passion application icon in C:\program files\speed passion v1.32 and go to compatibility tab and select run in compatibility mode for win xp and also check the box to run as administrator. All the new softwares are then available to view in the speed passion installer HIH Paul This is what got it to work in the end, run as administrator. I didn't have to run for win xp though. |
Originally Posted by kriiiss
(Post 7134568)
Does anyone know the motor limit on the 2.1 gt esc?
but if you are using Mod Software, it equal to no limit ex: 2.5T for 2S Like Shawn say it is the Pro ones, not the Lpf. http://www.speedpassion.net/en/productDetails.asp?p=104 |
Hi
Just got my lcd program box, i can change all the settings on the esc fine but as soon as i go to upgrade firmware or connect it to the computer it says connecting PC and just stays on that screen. What am i doing wrong? Marcus |
Originally Posted by issac51
(Post 7134734)
I also did this but becouse i didn't switch on the esc all that burnt out was the capacitor. I replaced this with a novak one ( as i couldn't get a new speed passion one ) and it works fine.
idk whats gonna happen if i turn it on after i shorted it out |
Originally Posted by rutter
(Post 7136681)
Hi
Just got my lcd program box, i can change all the settings on the esc fine but as soon as i go to upgrade firmware or connect it to the computer it says connecting PC and just stays on that screen. What am i doing wrong? Marcus you'll see the little green lite flash in the lower left corner while upgrading in happening then a pop up window will tell you update complete hope this helps |
Is anybody having problems with the new software on the drag brakes or im the only one?
|
Originally Posted by Born2Run
(Post 7137431)
Is anybody having problems with the new software on the drag brakes or im the only one?
|
Originally Posted by defcone
(Post 7137479)
It comes with 10% drag brakes when you first load up the software, wat problems are you having?
|
Originally Posted by Born2Run
(Post 7137502)
I have set the drag brakes on 20% but i don't get the same drag brake force ammount when i leave the throtle off.More drag brake when i leave the throtle when the supercharger has engaged and almost no drag brake when i leave it earlier
|
Realy weird but is a fact.
|
sp 2.1 instock here...
|
Originally Posted by skypilot
(Post 7136989)
nothing, when you open the speedpassion file, in the window that opens, click devices, then you will see, esc, lcd and motor checker ? click on lcd, then you can upgrade or change to then different softwares.
you'll see the little green lite flash in the lower left corner while upgrading in happening then a pop up window will tell you update complete hope this helps Marcus |
Originally Posted by Born2Run
(Post 7137567)
Realy weird but is a fact.
|
razzor have you upgrade your LCD program box to the newest firmware v1.03_070904 or you still use the v1.02? I still use the v1.02.Could this cause this issue with the drag brakes?
|
i updated to the newer firmware for the lcd. didnt try it with the older version.
Was supposed to run at tehregionals but had some errands i had to do in the morning so pitched up late to run race control. Havent run yet but hope to this weekend. |
| All times are GMT -7. It is currently 07:52 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.