|
Played around with the software hooked up to the pc and see what you mean.
Thanks |
What is the difference between 90205G and 90205C? What would be better for LIPO 4.0 or 4.5
|
adam, plese check your pm...
|
No check yours lol :D
Originally Posted by silverhkswrx
(Post 5817126)
adam, plese check your pm...
|
Originally Posted by andrewdoherty
(Post 5805889)
Thanks Charlie_b for updating the title. :)
|
possibly could we get a list of teh updates and what they are ??
|
Originally Posted by abailey21
(Post 5817175)
No check yours lol :D
|
can anyone post a color/pin sequence for the sensor lead.
I just fitted a SP13.5 and 17.5 along with GT2.0 and a GT2.0 LPF. I hooked up everything to my 17.5 and it wouldnt turn over unless i gave the spur gear a push and imediately stop. Took out sensor wire and it runs fine. Took sensor wire from 13.5 and it runs fine. was worried i fried somthing or wired incorrectly as motor got hot and started smoking. I cant check against the other lead as the sensor lead has black wires and the one in question is colored wires. should the wires be the same sequence on both plugs ??? My plugs are as follows red, blue, white, green, yellow, black red, blue, green, white, yellow, black |
Originally Posted by Jamesalex
(Post 5816287)
I am looking to get a new speed controller as I was wondering about the pro 2.0
how has it been running, I believe you can adjust timing is there also a turbo mode for this controller, it is between this the gm 120 and team wave rb50. Cheers |
Originally Posted by razzor
(Post 5819494)
can anyone post a color/pin sequence for the sensor lead.
I just fitted a SP13.5 and 17.5 along with GT2.0 and a GT2.0 LPF. I hooked up everything to my 17.5 and it wouldnt turn over unless i gave the spur gear a push and imediately stop. Took out sensor wire and it runs fine. Took sensor wire from 13.5 and it runs fine. was worried i fried somthing or wired incorrectly as motor got hot and started smoking. I cant check against the other lead as the sensor lead has black wires and the one in question is colored wires. should the wires be the same sequence on both plugs ??? My plugs are as follows red, blue, white, green, yellow, black red, blue, green, white, yellow, black |
"In the US" I don't know of any sensor leads different, all brands have the same wiring order on the motors and ESC's
Originally Posted by razzor
(Post 5819494)
can anyone post a color/pin sequence for the sensor lead.
I just fitted a SP13.5 and 17.5 along with GT2.0 and a GT2.0 LPF. I hooked up everything to my 17.5 and it wouldnt turn over unless i gave the spur gear a push and imediately stop. Took out sensor wire and it runs fine. Took sensor wire from 13.5 and it runs fine. was worried i fried somthing or wired incorrectly as motor got hot and started smoking. I cant check against the other lead as the sensor lead has black wires and the one in question is colored wires. should the wires be the same sequence on both plugs ??? My plugs are as follows red, blue, white, green, yellow, black red, blue, green, white, yellow, black |
Originally Posted by abailey21
(Post 5820121)
"In the US" I don't know of any sensor leads different, all brands have the same wiring order on the motors and ESC's
so both plugs should have the same order correct !?!? Thankfully it didnt stuff up the esc and motor just got the motor hot but its running fine now. |
Originally Posted by abailey21
(Post 5820121)
"In the US" I don't know of any sensor leads different, all brands have the same wiring order on the motors and ESC's
|
Originally Posted by yeahyeah
(Post 5815020)
I also tried the speedy "not connected to the receiver" switched it back on after calibration it will still go into the default mode.(when you check the settings using the pad -its not in factory default mode)
Noting tho for the above : Motor coggs it has very little or no brake - all braking options on speedy set to MAX. |
First I would like to say I am not that good with the computer. I have GT Pro 2.0. and I bought the lcd card also. I put the cd in and there are two links one on the left I can down load and save. The one on the right it just keeps going on the net and then ask me if it is ok to do so and over and over. Is that normal do I just need one of them. Also how or where do I get updates for it. Thank you. I know it is hard to understand what I am typing.
|
| All times are GMT -7. It is currently 01:43 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.