New Yokomo TC, the BD-5
#3301
Kshu. How does the specr M6 Body compare to the Protoform Speed 6 as far as downforce?
#3302
Tech Master
iTrader: (37)
You will have to check with your local hobby shops for availability.
#3303
Tech Apprentice
Anyone got any tips on helping get rid of the understeer/lack of steering with the front spool on carpet?
#3305
Tech Apprentice
17.5T Blinky
Tight course , any idea what springs?
Tight course , any idea what springs?
#3306
Tech Apprentice
I've seen the factory drivers are using aluminium servo horns,having snapped the kit plastic one today ,which is the one most use?
#3307
Try my one from the ets
http://www.petitrc.com/reglages/yoko...030/index.html
Caster is 4 not 2
Or for tight corse use more ackerman (2.5mm) springs hpi (silver/pink) or yokomo (pink/blue)
Greetz
http://www.petitrc.com/reglages/yoko...030/index.html
Caster is 4 not 2
Or for tight corse use more ackerman (2.5mm) springs hpi (silver/pink) or yokomo (pink/blue)
Greetz
#3308
Tech Apprentice
Thanks for the tips,i'll give that a try. Flattening the shocks at the front helps then?
#3310
a friend of mine is after one of these and is wondering what good spares he should carry with him i have been told to carry belts if you race mod but he is only running the 540 silver can brushed class
thanks
thanks
#3315
Tech Rookie
Anyone can help me what is the difference between Oring 1 and 2 ? I saw in Setupsheets sometimes they use 1 oring , sometimes 2 .. How can i set it up ?
Also 1 more question, what is the difference between original parts of wxi and bd-s2w,ys-7hg ?
Also 1 more question, what is the difference between original parts of wxi and bd-s2w,ys-7hg ?
Last edited by brsh; 12-08-2011 at 01:22 AM. Reason: Ask 1 more question..