Touring Car Custom Cut Urethane Chassis Protectors!!
#1
Touring Car Custom Cut Urethane Chassis Protectors!!
-I was unable to change title of my previous thread and I didn't want anyone to think they were only available for the TC5. Mods if you want, please delete previous thread-
For those wanting the best protection for their touring car chassis look no further.
This nearly undetectable, self-adhesive protective 7mil urethane film comes fully pre-cut. It is designed and made from same material used for paint protection on full-size vehicles to provide maximum protection to your touring cars carbon-fiber chassis underside against nicks, scrapes and scratches.
It is custom cut less than 1mm from edges to help prevent from catching on obstructions and allow sanding of chassis edges. Not only does it protect but also adds a nice shine to the underside of the chassis.
The film is 7mil itself, considered 8mil with backing and sold in pairs!
MIL=Unit of length for 1/1000 of an inch (.001”). Used in expressing thickness of films. 1 MIL = 25 microns.
Currently Available Chassis Applications:
Will Ship Worldwide
-Corally RDX
-Corally RDX PHI
-CRC GenX10
-Exotek "X" series TC5
-Exotek "X" series Mi3
-Hot Bodies Cyclone
-HPI Cup Racer
-HPI Sprint 2
-Schumacher Mi3
-Schumacher Mi3 Stiff Chassis 2.5mm
-Schumacher Mi4
-Schumacher Mission
-Serpent S400
-Team Associated TC5
-Tamiya F103
-Tamiya F104
-Tamiya TRF415 MSXX
-Tamiya TRF416
-Tamiya TRF416 World Edition
-Tamiya TRF-416X
-Team Losi JRX-S Type R
-Team Magic E4
-T.O.P. Racing "Photon"
-XRAY T1FK04
-X-Ray T1FK05
-X-Ray T2
-X-Ray T2 '007
-X-Ray T2 '008
-X-Ray T2 '009
-X-Ray T3
-Yokomo BD5
Available Soon!
-Schumacher MI4LP
-Tamiya TRF-415MS Marc Reinhard Edition
If you have any questions or other chassis suggestions for consideration please post them here:
Chassis up for future consideration:
-Awesomatix EP
-BMI DB10R
-Exotek HBX Cyclone
-HPI PRO4
-Hot Bodies Cyclone TC #67702 chassis
-Robitronic Avid
-Schumacher Mi3 5 cell chassis
-Team Associated FT TC4 Chassis
-Tamiya TB Evo IV
-Tamiya TA05
-TOP Scythe ARP
-Yokomo BD-5W
Corally RDX PHI Chassis Protector For #79837, #79838 & #79839 Chassis.
CRC Gen-X 10 Chassis Protector For #1755 Chassis.
Hot Bodies Cyclone #70728 chassis
-This will fit Cyclone, Cyclone Hara Edition, Surikarn Edition & World Champion Edition
Schumacher Mi3 Flex Chassis 2.0mm Chassis Protector Fits #U3145
Schumacher Mi3 Stiff Chassis 2.5mm Chassis Protector Fits #U3146
Schumacher Mi4 Chassis Protector Fits #U3483, U3484 & U3485
Serpent S400 Chassis Protector For #401113 & #101037 Chassis.
Tamiya F103 chassis #54092
Tamiya TRF415MSXX chassis #TA-9404735
Tamiya TRF416 #49495 chassis
Tamiya TRF416 World Edition chassis
Team Associated TC5 Chassis Protector Fits #31138 & #31140
Team Losi JRX-S Type R #LOSA4305 chassis
Team Magic E4 For #503105 chassis
T.O.P. Racing Photon For Rubber #TC-PCHC001-1 & Foam #TC-PCHS002-1 Chassis
]
X-Ray T1FK '04 Chassis Protector For #301110 Chassis.
X-Ray T1FK '05 Chassis Protector For #301112, #301113 & #301114 Chassis.
X-Ray T2 Chassis Protector For #301118, #301121, #301122 & #301123 Chassis.
Please Note #301118 & #301122 require 2 holes to be cut out.
X-Ray T2 '007 for both Rubber #301123 & Carpet #301123 version chassis.
X-Ray T2 '008 for both Rubber #301125 & Carpet #301126 version chassis.
X-Ray T2 '009 for Rubber #301128 version chassis.
Yokomo BD5 chassis #BD-002
Available Soon!
For more information please click link in signature!
Check out John Stranahan's test of the film:
http://www.rctech.net/forum/electric...ml#post4917371
Film takes a beating:
For more information click link in signature.
For those wanting the best protection for their touring car chassis look no further.
This nearly undetectable, self-adhesive protective 7mil urethane film comes fully pre-cut. It is designed and made from same material used for paint protection on full-size vehicles to provide maximum protection to your touring cars carbon-fiber chassis underside against nicks, scrapes and scratches.
It is custom cut less than 1mm from edges to help prevent from catching on obstructions and allow sanding of chassis edges. Not only does it protect but also adds a nice shine to the underside of the chassis.
The film is 7mil itself, considered 8mil with backing and sold in pairs!
MIL=Unit of length for 1/1000 of an inch (.001”). Used in expressing thickness of films. 1 MIL = 25 microns.
Currently Available Chassis Applications:
Will Ship Worldwide
-Corally RDX
-Corally RDX PHI
-CRC GenX10
-Exotek "X" series TC5
-Exotek "X" series Mi3
-Hot Bodies Cyclone
-HPI Cup Racer
-HPI Sprint 2
-Schumacher Mi3
-Schumacher Mi3 Stiff Chassis 2.5mm
-Schumacher Mi4
-Schumacher Mission
-Serpent S400
-Team Associated TC5
-Tamiya F103
-Tamiya F104
-Tamiya TRF415 MSXX
-Tamiya TRF416
-Tamiya TRF416 World Edition
-Tamiya TRF-416X
-Team Losi JRX-S Type R
-Team Magic E4
-T.O.P. Racing "Photon"
-XRAY T1FK04
-X-Ray T1FK05
-X-Ray T2
-X-Ray T2 '007
-X-Ray T2 '008
-X-Ray T2 '009
-X-Ray T3
-Yokomo BD5
Available Soon!
-Schumacher MI4LP
-Tamiya TRF-415MS Marc Reinhard Edition
If you have any questions or other chassis suggestions for consideration please post them here:
Chassis up for future consideration:
-Awesomatix EP
-BMI DB10R
-Exotek HBX Cyclone
-HPI PRO4
-Hot Bodies Cyclone TC #67702 chassis
-Robitronic Avid
-Schumacher Mi3 5 cell chassis
-Team Associated FT TC4 Chassis
-Tamiya TB Evo IV
-Tamiya TA05
-TOP Scythe ARP
-Yokomo BD-5W
Corally RDX PHI Chassis Protector For #79837, #79838 & #79839 Chassis.
CRC Gen-X 10 Chassis Protector For #1755 Chassis.
Hot Bodies Cyclone #70728 chassis
-This will fit Cyclone, Cyclone Hara Edition, Surikarn Edition & World Champion Edition
Schumacher Mi3 Flex Chassis 2.0mm Chassis Protector Fits #U3145
Schumacher Mi3 Stiff Chassis 2.5mm Chassis Protector Fits #U3146
Schumacher Mi4 Chassis Protector Fits #U3483, U3484 & U3485
Serpent S400 Chassis Protector For #401113 & #101037 Chassis.
Tamiya F103 chassis #54092
Tamiya TRF415MSXX chassis #TA-9404735
Tamiya TRF416 #49495 chassis
Tamiya TRF416 World Edition chassis
Team Associated TC5 Chassis Protector Fits #31138 & #31140
Team Losi JRX-S Type R #LOSA4305 chassis
Team Magic E4 For #503105 chassis
T.O.P. Racing Photon For Rubber #TC-PCHC001-1 & Foam #TC-PCHS002-1 Chassis
]
X-Ray T1FK '04 Chassis Protector For #301110 Chassis.
X-Ray T1FK '05 Chassis Protector For #301112, #301113 & #301114 Chassis.
X-Ray T2 Chassis Protector For #301118, #301121, #301122 & #301123 Chassis.
Please Note #301118 & #301122 require 2 holes to be cut out.
X-Ray T2 '007 for both Rubber #301123 & Carpet #301123 version chassis.
X-Ray T2 '008 for both Rubber #301125 & Carpet #301126 version chassis.
X-Ray T2 '009 for Rubber #301128 version chassis.
Yokomo BD5 chassis #BD-002
Available Soon!
For more information please click link in signature!
Check out John Stranahan's test of the film:
http://www.rctech.net/forum/electric...ml#post4917371
Film takes a beating:
Originally Posted by John Stranahan
I gave the film a good test. I ran three long packs on our outdoor track. The TC5 is really fast. Any bumps that are contacted are at high speed. Note in the picture the scratches at the nose. These are all scratches in the film that would have been in the graphite. Note also there is no evidence of peeling. That would be a show stopper. Nice product give it a try.
For more information click link in signature.
Last edited by Rommel; 05-25-2010 at 10:01 PM.
#3
If there is interest in them then I will make them. Besides the Gen X10 what would be some other popular World GT cars?
#4
Tech Fanatic
Excellent...... looking forward to running you this year...I got the bugs worked out of the AE and put it on Pann Carr for the last race....Collins and you weren't there.... looking forward to the season.......rules meeting the 20th at 7:00p
#7
Chassis is ordered from RC Market so I hope to have some made and available by next week. Of course it depends on when chassis arrives so I can make and test fit. Here is the list of new chassis which I hope to have within the next 1-2 weeks:
-Corally RDX
-Team Magic E4
-Schumacher Mi3 Stiff Chassis 2.5mm Coming Soon!
-Serpent S400
-Tamiya TRF416 World Edition
-X-Ray T1FK05
-X-Ray T2R
-Corally RDX
-Team Magic E4
-Schumacher Mi3 Stiff Chassis 2.5mm Coming Soon!
-Serpent S400
-Tamiya TRF416 World Edition
-X-Ray T1FK05
-X-Ray T2R
#9
Now Available!
Schumacher Mi3 Stiff Chassis 2.5mm Chassis Protector Fits #U3146
Schumacher Mi3 Stiff Chassis 2.5mm Chassis Protector Fits #U3146
#10
Got an ETA on the T1FK'05 films?
#12
#14
#15