Tamiya TRF415
Setup for foams on carpet
Does anyone have a good starting setup for an original 415 on carpet with foams.
Car has dual diffs and the original suspension. Will be running brushless LiPo.
Thanks,
Car has dual diffs and the original suspension. Will be running brushless LiPo.
Thanks,
Tech Champion
iTrader: (108)
Crash, when I ran mine those couple times with foams, it was really good. This was my starting point.
Front/Rear
60/40 wt oil 2 hole/ 3 hole
Assoc. springs copper/red or purple/copper depending on traction
-2.0/-1.5 camber
Yellow front stab..no rear Red if you need more steering
Droop 1mm/1.5-2mm over ride height
#2 inner camber f/r
Cyan/Magenta and a Proto G6
Thats all I wrote down...should get you close
Front/Rear
60/40 wt oil 2 hole/ 3 hole
Assoc. springs copper/red or purple/copper depending on traction
-2.0/-1.5 camber
Yellow front stab..no rear Red if you need more steering
Droop 1mm/1.5-2mm over ride height
#2 inner camber f/r
Cyan/Magenta and a Proto G6
Thats all I wrote down...should get you close
Last edited by CIVIC91; 08-26-2006 at 07:47 AM.
Thanks,
Thanks, CIVIC91.
Later,
Later,
Tech Master
iTrader: (92)
Does anyone know the tension (lbs) for the milky blue spring set #49389? Thx.
Originally Posted by sohlman
Does anyone know the tension (lbs) for the milky blue spring set #49389? Thx.
Tech Master
iTrader: (92)
Yeah, I noticed that the milky blue springs came on the #53440 spring set cardboard holder and say red, yellow, blue and white...but no spring rate/tensions (lbs). I look for those rates now.
Tech Master
iTrader: (92)
Of course, I found it on Try Hard's site...great resource.
Aluminum Rear Upright ?
Does anyone know what degree of toe these provide? Part Number 53687. Tamiya's web site does not give any info.
Aluminum Upright
Thanks,
Aluminum Upright
Thanks,
Tech Champion
iTrader: (108)
Pretty sure they are 1 degree
Tech Elite
iTrader: (1)
hey all you 415 owners ... anybody have a good Carpet set-up to start with for a MS ..... thanks ... markb.
Tech Fanatic
iTrader: (2)
check mark reinhards setup from vegas on tamiyas website it works really well. some guys think the standard suspension is better on carpet with foams but i dont agree. my car is always sweet on carpet. just my $.02
Tech Elite
iTrader: (1)
Originally Posted by xtrememadness
check mark reinhards setup from vegas on tamiyas website it works really well. some guys think the standard suspension is better on carpet with foams but i dont agree. my car is always sweet on carpet. just my $.02
Tech Fanatic
iTrader: (2)
never tried the pro module suspension. i think im gonna try the new short arms. they should work well on carpet. do you have the 4mm chassis.
Tech Elite
iTrader: (1)
not yet but should have one tomorrow ...
Tech Master
iTrader: (14)
Mark:
Hi,
I just got a 415. thinking about running it on carpet/foams. just got a diff for it from a friend. now all I gotta do is get the right rear blocks. I can't wait to get it on the track. the TA-05 is a blast to drive. I'm hoping the 415 will be just as fast.
How's things going???? PM me when you get a chance.
Thanks
Hi,
I just got a 415. thinking about running it on carpet/foams. just got a diff for it from a friend. now all I gotta do is get the right rear blocks. I can't wait to get it on the track. the TA-05 is a blast to drive. I'm hoping the 415 will be just as fast.
How's things going???? PM me when you get a chance.
Thanks