Awesomatix EP Touring Car (A700 Shaft Drive)
#8567
Racing on small crc carpet track med grip what car would you guys reccomend? Evo II or IIC?
#8570
Tech Elite
iTrader: (37)
My car seems to have some excess play (clearance) between the G03 25T bevel gear and the ring gear on the diff. I have already moved the SH0.1 shim to the gear side of the shaft to move the gears slightly closer for better mesh, but they still seem rather loose. There is no more room to fit a thicker shim on the shaft and still get the SPR06 wire ring in place.
How much play should there be in the gear mesh? Is there some way to get more adjustment? Or should I not worry about it?
How much play should there be in the gear mesh? Is there some way to get more adjustment? Or should I not worry about it?
#8571
R/C Tech Elite Member
iTrader: (28)
My car seems to have some excess play (clearance) between the G03 25T bevel gear and the ring gear on the diff. I have already moved the SH0.1 shim to the gear side of the shaft to move the gears slightly closer for better mesh, but they still seem rather loose. There is no more room to fit a thicker shim on the shaft and still get the SPR06 wire ring in place.
How much play should there be in the gear mesh? Is there some way to get more adjustment? Or should I not worry about it?
How much play should there be in the gear mesh? Is there some way to get more adjustment? Or should I not worry about it?
any time i've tried to add shims to one side of the spool i've ended up putting excess stress and breaking spools (at03 style--- never saw issue w/ at03m-s)
#8572
Just noticed these Motiv M-CODE motors on the Ax USA site. Anyone have any experience with these motors? Ideally how they may compare to the Team Powers Actinium?
#8574
Good day! I spread my settings for extra bumpy track. Unfortunately, I was unable to fight because of illness, but the car was perfect!
#8575
#8577
Tech Initiate
Hey guys. I never driven a awsomatix car. But i am looking into getting one for stock driving 13.5 Blinky mode. My question is, from the site i see several models. Witch one would you recommend ? What extra parts would you recommend i also get ? Any advice or warning would be greatly appreciated.
The car will mainly be driving on CRC carpet indoor.
Thank you all for your thoughts and advice.
The car will mainly be driving on CRC carpet indoor.
Thank you all for your thoughts and advice.
#8578
You want to get an Evo 2 kit. The only options you should need are a topdeck, lowered arm balls (AT21S), and titanium turnbuckles. For general spares, if you look on the awesomatix usa shop site, there is a suspension "crash kit", that will cover all your basics.
#8579
Tech Master
iTrader: (10)
Hey guys. I never driven a awsomatix car. But i am looking into getting one for stock driving 13.5 Blinky mode. My question is, from the site i see several models. Witch one would you recommend ? What extra parts would you recommend i also get ? Any advice or warning would be greatly appreciated.
The car will mainly be driving on CRC carpet indoor.
Thank you all for your thoughts and advice.
The car will mainly be driving on CRC carpet indoor.
Thank you all for your thoughts and advice.