Warpspeed Demon and Demon 2
#826
haha, yea I know my dad can be a road block sometimes but you have to admit, he is getting much better.
yes I run the stk tower up front...for carpet foam, or anything on carpet for that matter, I feel the stk tower gives the car a better feel to it.
Billy, it doesnt matter if your motors are off the shelf or hand tuned on your dyno lol! They are always faster than mine!
yes I run the stk tower up front...for carpet foam, or anything on carpet for that matter, I feel the stk tower gives the car a better feel to it.
Billy, it doesnt matter if your motors are off the shelf or hand tuned on your dyno lol! They are always faster than mine!
#828
shh! maybe I can actually sneak some hp past him ok never mind actually my "Harper" 19 was pretty quick...ah, the cool things 38 degrees of timing on a 19t "not so spec anymore" can do for you
...dont worry, we dont run spec here...just 19 so outlaws are allowed
...dont worry, we dont run spec here...just 19 so outlaws are allowed
Last edited by wheelmanST; 12-29-2003 at 09:21 PM.
#829
Tech Champion
iTrader: (5)
Hey WheelmanST-can you help a brother out? I built a 19t motor to test for the Birds with. Its an old D4 Mod can, 36 degrees timing with a C2 arm in it. Do you know what you rolled it out at your track? Also-what springs on motor? I'll be running on the Gates new 100' x 50" layout.
Brian,
I got an e-mail from your buddy about the Xray conversion.
Thanks,
Ray
Brian,
I got an e-mail from your buddy about the Xray conversion.
Thanks,
Ray
#831
Ray - I ran the stk gold springs on my reedy 19t. On yours try red and red. My track is quite a bit smaller...maybe 38x80 or so...I dont know the actual size. I ran a roll out of 1 flat. I gear the quads like mad! They like the heat.
Hope that helps...let me know if you need some more info.
Hope that helps...let me know if you need some more info.
#833
Personally, I like C2's better...they can really pull some massive gearing! I will have some stk motor stuff figured out tonight.
#836
Regional Moderator
iTrader: (3)
Originally posted by wheelmanST
shh! maybe I can actually sneak some hp past him ok never mind actually my "Harper" 19 was pretty quick...ah, the cool things 38 degrees of timing on a 19t "not so spec anymore" can do for you
...dont worry, we dont run spec here...just 19 so outlaws are allowed
shh! maybe I can actually sneak some hp past him ok never mind actually my "Harper" 19 was pretty quick...ah, the cool things 38 degrees of timing on a 19t "not so spec anymore" can do for you
...dont worry, we dont run spec here...just 19 so outlaws are allowed
Can't be winniing with my top motors!!!
#837
Cody has it...gave it back to him after the main. I wish I still had it lol! Fast motor!
#838
well after tonights racing at trackside hobbies and did much better then i had done on sunday, i had tq for the first two heats of stock rubber with a 21 5:08 and had it taken from me by troy shear, but i ran 21laps the hole night and was top of c-main missing the B-main by 20 tenths i was first in the main till about 1:35 left and i got stuck and got passed but was on the leaders tail the rest of the race and almost had him every lap since i got into second but wopuld end up touching the island give up a lil space but other then that i was pulling moderate A-main lap timess trying to catch first....
my thanks to warpspeed and all the other guys that make this car so competetive..
lazyboy
my thanks to warpspeed and all the other guys that make this car so competetive..
lazyboy
#840
Tech Regular
WARPSPEED RACING
Good Job Preston!
Brian: What chassis were you running? The 3.0mm or 2.5mm?
Happy New Year to Everyone!
Brian: What chassis were you running? The 3.0mm or 2.5mm?
Happy New Year to Everyone!