Sal Amato

iTrader: (27)

heres what I ran at my local track I was turning mid to low 9's:
Front
#2 pistons
Purple springs
60wt
2* chubs
f+2 blocks
shocks inner on bottom middle on top
camber link lower inner
1.5 camber
Jaco orange purple
Tq tire additive 1/4 to 1/2 on tire
Rear
#2 pistons
copper springs
50wt
losi rear hubs
R+3+2 block
Shocks outer on bottom middle on top
long wheelbase
rear hubs in middle
camber link inner lower inner on hub
2* camber
Jaco purple
Ride height 4.5 mm Droop stock settings as in manual
Hope this helps you out

tmunno

iTrader: (1)

With all the storms going on in our area I forgot to list the state race results. Lynn finished 7th A-main novice. Toni was 7th in the B, (touring stock) she was 2nd untill a friend helped her into the pipes I finished up 6th in the B of novice. Not a bad day for the three of us. We held our point positions for the series. With one more race in Oct.(RPM) Toni has one more shot at improving her overall standing. We missed out on racing this weekend as the hurricane had other ideas about what we should do.

wyd

iTrader: (51)

Does Warpseed still have a website? Need to get some TC3 diff cases from them.

Brian

BMXJEFF

iTrader: (9)

i am looking for a carpet setup for a d2 running stock and\or 19t on rubber. any advice will be very helpful.
THANKS BUTCH REGALIA

IF POSSIBLE E-MAIL TO : [email protected]
THANKS AGAIN BUTCH

JDM_DOHC_SiR

iTrader: (31)

Me too..

Anyone still know where to get a couple of sets...

-Dave

ts

Rush & Son R/C Raceway
1000 Guy Mc Adams Rd.
Henderson, TN 38340
Home: 731-989-4340
Cell: 731-431-0229
Fax: 731-989-0430
E-Mail: [email protected]
Websyte: http://littletalladega.sytes.net

Tony has some in stock I believe.

Jayjp

You could just contact Vic and Eva @ [email protected]

It's unreal how much they help the drivetrain

JDM_DOHC_SiR

iTrader: (31)

Thanks for the info

Stroker_ace22

Is there any other parts you would need to convert a regular ft/tc3 chassis to a demon?

microrcdude

iTrader: (70)

Does warpspeed have a website?

Jayjp

They are in the middle of working on one right now.

You can just email them with any questions, they are very helpful

PaZ

I am going to buy a Blue metal flake D1 brand new for my TC3 and i would like to know if i can just take the parts off my TC3 and put them into the Warpspeed. By parts i mean electrics more so than the ally upgrades i got.
Can anybody give me any advise?

Thanks very much Adam

speedxl

Adam yes everything from the tc3 is used except for the tub! All your electronics aswell!

PaZ

thats great thanks, i read on a site that you needed to buy a ariel holder as they dont have anywhere for the wire from the reciever to go up and and nowhere support the the ariel. i thought that was crazy. But im sure a blue metal flake D1 and every blue ally upgrade i can get for my TC3 in the UK will look sweet

PaZ

yea they say that you need to buy and i quote from the site
"A blue IRS antenna mount keeps the antenna in place, since the Warpspeed Chassis doesn't come with one"