Originally Posted by GryphunRacing
(Post 11950213)
VBC racing released pricing for the new Flash 04 @ $427.99 USD. Can be found on their website and you can preorder.
http://www.vbcracing.com/products/vb...-d-05-vbc-0075 Pricing is a bit steep (although people will come back with this being a full option car - without wings, tires, and body)? What will dealers being charging? Anyone have some insight? Thanks G-man |
Originally Posted by aarcobra
(Post 11952011)
Glad you found one source at least! Brad is a busy boy and does an amazing job. Do you follow him on Face Book? He posted recently that he is going ot release the 2013 stuff without the helmet art work, that will get things moving.
Be patient, he get's it done! Ned If there are new 2013 team decals available, then i will see them at TQ rc racing. |
Concerning the paint scheme rules in the VF1 class... its about keeping the cars looking and feeling like the cars from that era... It's not necessary to duplicate a specific car, although that is fantastic... some people can not resist painting up flames and slapping on the latest RC decal they received at the last raffle... :D
|
Originally Posted by lightfoot
(Post 11952729)
Concerning the paint scheme rules in the VF1 class... its about keeping the cars looking and feeling like the cars from that era... It's not necessary to duplicate a specific car, although that is fantastic... some people can not resist painting up flames and slapping on the latest RC decal they received at the last raffle... :D
I'm so glad that the rules for VF1 do not allow wild paint schemes, flames, skulls, neon paint, etc. About time that someone is trying to put the "scale" back into a class of racing! Of course, the VTA series has been doing that right along with great success. Another favorite of mine. |
Originally Posted by liljohn1064
(Post 11952594)
That's about $200.00 more than I want to spend at that price.
When an F1 starts encroaching on tourer level as far as pricing, regardless of the quality, its getting far too expensive |
Originally Posted by liljohn1064
(Post 11952594)
That's about $200.00 more than I want to spend at that price.
|
Originally Posted by gijoe64
(Post 11953795)
That price is MSRP price, check with CRC on the price of the Flash-4
|
Originally Posted by gijoe64
(Post 11953795)
That price is MSRP price, check with CRC on the price of the Flash-4
Hopefully low-mid $200s as still need to get wheels, body, wings |
Originally Posted by lightfoot
(Post 11952729)
Concerning the paint scheme rules in the VF1 class... its about keeping the cars looking and feeling like the cars from that era... It's not necessary to duplicate a specific car, although that is fantastic... some people can not resist painting up flames and slapping on the latest RC decal they received at the last raffle... :D
|
Update
5 Attachment(s)
OK, Here's the latest I can figure out. With the F104 front end I cannot find a way to get the sidth to 190mm using the VTA wheels and tires. 180mm is the best I can do with "stock" parts. I'm sure it could be done but probably not worth it considering the F103, F109, and probably the front end from RCMART will all work out fairly easily and look better too.
The F103 and 109 front ends are the same width at the king pins so should be interchangeable. If the RCMART part is a little narrower it should still work well. Pics show different views and details of what I have so far. I moved everything over to the F104 Chassis plate to be sure it came out the same as the F103 I was using. The F104 is easier to use since that's the one Manny used. More later, I think painting the body is next!!! Attachment 1046164 Attachment 1046165 Attachment 1046167 Attachment 1046168 Attachment 1046170 |
Anyone seen this one before?
http://www.youtube.com/watch?v=YAIyVFV4CsA |
Originally Posted by aarcobra
(Post 11954246)
OK, Here's the latest I can figure out. With the F104 front end I cannot find a way to get the sidth to 190mm using the VTA wheels and tires. 180mm is the best I can do with "stock" parts. I'm sure it could be done but probably not worth it considering the F103, F109, and probably the front end from RCMART will all work out fairly easily and look better too.
The F103 and 109 front ends are the same width at the king pins so should be interchangeable. If the RCMART part is a little narrower it should still work well. Pics show different views and details of what I have so far. I moved everything over to the F104 Chassis plate to be sure it came out the same as the F103 I was using. The F104 is easier to use since that's the one Manny used. More later, I think painting the body is next!!! Attachment 1046164 Attachment 1046165 Attachment 1046167 Attachment 1046168 Attachment 1046170 http://www.tamiya.com/english/rc/rcmanual/58367.pdf |
F103GT Parts
Originally Posted by Taylorm
(Post 11955839)
Ned...wouldnt these axle parts solve the hex hub issue???...Are these hexes on this car the same dimensions as the HPI rims??...they look the same to me...and the front end looks pretty cool too...OOPS....cars is discontinued....parts may be hard to get
http://www.tamiya.com/english/rc/rcmanual/58367.pdf I did stumble on info on the F103GT parts you found and the steering knuckle/hub fooled me! It looked like a rear type hub but turn it 90 degrees and I can see how it fits. It has alot of trailing caster and my not be wide enough for what we are doing. There is a plastic version from Tamiya on the "T" plastic tree that woudl be cheaper to try. I saw it on speedtech. Next time I order from them I'll get a set to check out. Parts are available,but some times on backorder. I'm very happy with the FGX set-up, of course I have plenty of the parts already! :) |
GP Malaysia
Originally Posted by HeliYogi
(Post 11957150)
Tonight at 7:45 PM PST the lobby is open for the GP of Malaysia :D
Race starts at 8:00 pm PST Ive sent all of you a friend invite, be sure to respond so I can add you to the race. One heat for sure and if there is enthusiasm and time maybe two heats of 15 laps. Dynamic whether. Will it rain? Can we keep the AI from P-1? Tonight there will be two AI advance racers for ZMANIA and F3dude challenge :eek: Sockrocker and two more drivers join in for the first time a big WELCOME dudes, see you latter at the race. F-1 weekend predictions anyone? 1. Vettel (dry) Alonso (wet) 2. Kimi (W or D) 3. Hamilton (D) Perez (w) http://www.rctech.net/forum/racing-f...l#post11957150 |
Originally Posted by aarcobra
(Post 11954246)
OK, Here's the latest I can figure out. With the F104 front end I cannot find a way to get the sidth to 190mm using the VTA wheels and tires. 180mm is the best I can do with "stock" parts. I'm sure it could be done but probably not worth it considering the F103, F109, and probably the front end from RCMART will all work out fairly easily and look better too.
The F103 and 109 front ends are the same width at the king pins so should be interchangeable. If the RCMART part is a little narrower it should still work well. Pics show different views and details of what I have so far. I moved everything over to the F104 Chassis plate to be sure it came out the same as the F103 I was using. The F104 is easier to use since that's the one Manny used. More later, I think painting the body is next!!! Attachment 1046164 Attachment 1046165 Attachment 1046167 Attachment 1046168 Attachment 1046170 Looks great Ned, thanks for the pictures! Keep them coming. Looking froward to seeing that body painted and mounted. Also, can't wait to see those TECH Racing front arms on that car! :) |
All times are GMT -7. It is currently 02:44 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.