|
I bought the Wolfhobbies alloy upgrade set and have to say that a lot of slop is gone.http://www.wolfhobbies.com/product.c...7&product=8351
The only bit of slop i have is on the outside of the axle where the wheels go. This is due to the 2 piece set of the outside of the axle. At the moment i ordered the steel hubs from the E4JS and some clamb on wheel hexes to get rid of all the slop there.. I am also waiting on a set of red shocks so i can complete my E4 to a red racing monster:lol:. If i have them fitted i will post some pics up as the car looks rather nice with all those red parts:D:D cheers Roy
Originally Posted by blis
(Post 6994894)
Isaac.. do the Alu hubs remove the slop?
|
Originally Posted by blis
(Post 6994894)
Isaac.. do the Alu hubs remove the slop?
|
Originally Posted by Born2Run
(Post 6994988)
I haven't got yet my TM RS'09 but i read here that you cannot fit all the BL motors without some dremel work on the belt tensioner.Why this?Because of the motors lenght or something else?Could someone help me please to get the picture?
|
Originally Posted by Pro10noob
(Post 6996049)
I bought the Wolfhobbies alloy upgrade set and have to say that a lot of slop is gone.http://www.wolfhobbies.com/product.c...7&product=8351
The only bit of slop i have is on the outside of the axle where the wheels go. This is due to the 2 piece set of the outside of the axle. At the moment i ordered the steel hubs from the E4JS and some clamb on wheel hexes to get rid of all the slop there.. I am also waiting on a set of red shocks so i can complete my E4 to a red racing monster:lol:. If i have them fitted i will post some pics up as the car looks rather nice with all those red parts:D:D cheers Roy |
Not only the lenght of the motor but also the shape.
The LRP X11 motors fit perfectly without the use of a dremel. It is because of the backside shape of the motor. If it is tapered it fits ok,if it is like the Tekin or GM motors with a 90 degrees backside,you have to dremel a bit on the side belt tensioner and the left bulkhead to get anough room to play with the gears. cheers Roy
Originally Posted by Born2Run
(Post 6994988)
I haven't got yet my TM RS'09 but i read here that you cannot fit all the BL motors without some dremel work on the belt tensioner.Why this?Because of the motors lenght or something else?Could someone help me please to get the picture?
|
Originally Posted by Isaac
(Post 6993503)
I suggest front steel universals, purple and pink springs, set of shims from www.wolfhobbies.com in 1 and 2 mm sizes, get the aluminum single bell crank (steering), 110 spur for more brushless gearing options and that's all I can think of now. I have all aluminum hubs and steering knuckles.
|
Originally Posted by buffalobill989
(Post 6996282)
whats the part no for the alum single arm steering? that looks like something i want to add. same goes for the 2 red upgrade kits:D
http://www.wolfhobbies.com/54803302.jpg |
thanks. i didnt look into the kfactory stuff.
|
is that all i need or do i need a single bell crank conversion. ive got an older e4 that has the dual bell crank. thanks for the help:D
|
Not sure about the older chassis and all that may be needed. I can't answer that but call up Wolf Hobbies (or email) and they will let you know.
|
thanks ill shoot him an email:D
looks like its time to place an order:nod: |
Sneak preview:sneaky::sneaky::D:D
cheers Roy Sorry about the size tho http://img62.imageshack.us/img62/3241/cimg0312s.th.jpg http://img714.imageshack.us/img714/5731/cimg0311.th.jpg http://img713.imageshack.us/img713/9...0310bha.th.jpg http://img714.imageshack.us/img714/5593/cimg0308.th.jpg http://img713.imageshack.us/img713/4...mg0306h.th.jpg
Originally Posted by wyd
(Post 6996271)
Cool. You will have to post some pics when you have it all done.:nod:
|
E4 Original
Originally Posted by Isaac
(Post 6996302)
|
1 Attachment(s)
Originally Posted by Pro10noob
(Post 6996279)
Not only the lenght of the motor but also the shape.
The LRP X11 motors fit perfectly without the use of a dremel. It is because of the backside shape of the motor. If it is tapered it fits ok,if it is like the Tekin or GM motors with a 90 degrees backside,you have to dremel a bit on the side belt tensioner and the left bulkhead to get anough room to play with the gears. cheers Roy Do you think i'll have some issue with this motor? |
You *may* not because of the slanted end.
|
| All times are GMT -7. It is currently 07:13 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.