|
Originally Posted by qwerty
what sort of transponder? a amb pt? or a club transponder?
the club loaner transponder uses a body clip thru the body... the ambrc can fit in the chasis with double sided tape, or on the rear left hand side of the chassis there is 2 spare screws where you can screw it in (but this position lays the PT sideways, and i had problems with the Transpoder picking up the signal, when the loop was above the car) |
1 Attachment(s)
Originally Posted by Wicked-Wayz
I use the big & medium plastic clip that came with my cva shocks. Which in size is I think about 6mm. Set it low enough so your front arms are level. When there level it will keep the front from binding. I have very little time right now until monday. If I get some good free time before then I will measure mine. What I told you is pretty much my guess for what they are.
Peace Aaron(W-W) thanks. |
Originally Posted by Edgarski
club transpoder
drill a hole about 5mm wide, on the front windscreen, and use a body clip |
i see...thanks mate.
|
click post reply -> scroll down and see "manage attatchements"
|
got it..thanks..
is there a reason why clip the trsnpoder on the front window ? |
Originally Posted by Edgarski
Sorry I don't get which is the plactic clip you were referring at. I attached a pic of CVA shock set...just when you have the chance man...
thanks. |
Originally Posted by Edgarski
got it..thanks..
is there a reason why clip the trsnpoder on the front window ? |
got it ..thanks a lot
|
Hey thanks guys. Anyone here race mini at Fredrick or RCO cause I've heard something about a group of guys wanting to race thier minis together.
|
Tires
Question for you mini guys. Just getting into mini's and was wondering what tire options are available. I would like to keep everything to "scale", meaning not using touring car tires. Thanks in advance.
|
Originally Posted by lotus1
Hey can any of you guys tell me if the TAo3 front hub carriers(steering blocks) will interchange with the TL cars.Specifically the mini cooper.Thanks,Mario.
|
Originally Posted by qwerty
they are shock spacers... they should come with the tree with the original shocks... they are a "C" shaped and slide between the spring and the shock cap around the shock body.... add some "pre-load"
|
Originally Posted by Edgarski
thanks man..i'm still confused because my original query is i will use my Aluminum TA04-R TRF threaded damper and opinions on using it....do i still need to use those 'c' clips as preload?
if they are threaded u dont need to use the spacers... well u may want to use the spacers to measure out 2mm or 3mm or 4mm |
Originally Posted by KO PROPO Staff
Question for you mini guys. Just getting into mini's and was wondering what tire options are available. I would like to keep everything to "scale", meaning not using touring car tires. Thanks in advance.
only tires that say m-chassis, there are only 5 kinds u can get from tamiya and the two more from hpi aswell. |
| All times are GMT -7. It is currently 09:01 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.