Hpi Pro 4
Tech Master
iTrader: (22)
Join Date: Aug 2003
Location: Where there's smoke there's a tyre
Posts: 1,784
Trader Rating: 22 (100%+)
Originally Posted by kewdawg
What's your current set-up?
I can't visually see something that I have done wrong, even Miura from HPI has checked the suspension and he noticed nothing wrong with it.
Tech Master
iTrader: (80)
Need Hpi Parts
Anyone have any HPI pro 4 Hara parts that they are looking to get rid of? I want to get hte motor mount, the shocks, and the front and rear input shafts.
Also what chassis(upper and top deck) should I run for carpet? I heard that the 3.0mm is the best. If so, does anyone have one of these for sale as well? Also am in need of a spool.
Please email me at [email protected]
Thank you in advance.
Chirag
Also what chassis(upper and top deck) should I run for carpet? I heard that the 3.0mm is the best. If so, does anyone have one of these for sale as well? Also am in need of a spool.
Please email me at [email protected]
Thank you in advance.
Chirag
Tech Regular
iTrader: (4)
Originally Posted by cpatel529
Anyone have any HPI pro 4 Hara parts that they are looking to get rid of? I want to get hte motor mount, the shocks, and the front and rear input shafts.
Also what chassis(upper and top deck) should I run for carpet? I heard that the 3.0mm is the best. If so, does anyone have one of these for sale as well? Also am in need of a spool.
Please email me at [email protected]
Thank you in advance.
Chirag
Also what chassis(upper and top deck) should I run for carpet? I heard that the 3.0mm is the best. If so, does anyone have one of these for sale as well? Also am in need of a spool.
Please email me at [email protected]
Thank you in advance.
Chirag
Tech Champion
iTrader: (9)
Originally Posted by cpatel529
Anyone have any HPI pro 4 Hara parts that they are looking to get rid of? I want to get hte motor mount, the shocks, and the front and rear input shafts.
Also what chassis(upper and top deck) should I run for carpet? I heard that the 3.0mm is the best. If so, does anyone have one of these for sale as well? Also am in need of a spool.
Please email me at [email protected]
Thank you in advance.
Chirag
Also what chassis(upper and top deck) should I run for carpet? I heard that the 3.0mm is the best. If so, does anyone have one of these for sale as well? Also am in need of a spool.
Please email me at [email protected]
Thank you in advance.
Chirag
BMI makes a great chassis...unfortunately I sold my set to Axel.
or you can get the HPI 3mm chassis and upperdeck. tower should have those in stock as well as the spool.
what mm foam and rubber tires are peaple runing
Hi, whats everyone doing regards running the HPI spool,
how much wear do you notice, do you grease ? or run it dry so dirt doesnt increase wear? a
ny other makes out there that do a decent one, that doesnt wear so quickly ?
Or is everyone just replacing them on a regular basis ?
how much wear do you notice, do you grease ? or run it dry so dirt doesnt increase wear? a
ny other makes out there that do a decent one, that doesnt wear so quickly ?
Or is everyone just replacing them on a regular basis ?
Tech Champion
iTrader: (9)
Originally Posted by chr15tophe
Hi, whats everyone doing regards running the HPI spool,
how much wear do you notice, do you grease ? or run it dry so dirt doesnt increase wear? a
ny other makes out there that do a decent one, that doesnt wear so quickly ?
Or is everyone just replacing them on a regular basis ?
how much wear do you notice, do you grease ? or run it dry so dirt doesnt increase wear? a
ny other makes out there that do a decent one, that doesnt wear so quickly ?
Or is everyone just replacing them on a regular basis ?
or you can replace the CVD pins with the IRS CVD pin cushions
Tech Apprentice
On carpet it depends on the tires which chassisplate you should run. With foam tires you should use the 3mm but with rubber you should use the 2mm plate, it's easier to drive, provides more grip and you won't have any problems with tweak.
Also very nice to drive is when you put 45g lead on your bumber, totally different steering feeling....
Also very nice to drive is when you put 45g lead on your bumber, totally different steering feeling....
Tech Regular
iTrader: (4)
hmm i never thought of the weight on the front thing, any idea how that would work on asphalt? i may try it just for fun this weekend
19 Turn Spec Class Racing
Can any one recommend 48 pitchg spur/pinion choices for the Pro 4 that suits 19t spec class motors, running on tarmac with rubber tyres?
Originally Posted by Marcel
On carpet it depends on the tires which chassisplate you should run. With foam tires you should use the 3mm but with rubber you should use the 2mm plate, it's easier to drive, provides more grip and you won't have any problems with tweak.
Also very nice to drive is when you put 45g lead on your bumber, totally different steering feeling....
Also very nice to drive is when you put 45g lead on your bumber, totally different steering feeling....
Tech Apprentice
We raced allways with the stock upper deck with the "hara mod". With rubber tire this was the fastest combination. Know i'm using the new 2.25mm upper deck from the hara special, but makes now big difference...
Greetz Marcel
Greetz Marcel
Tech Apprentice
Hi,
here are some pics of my P4 ready for carpet racing.
here are some pics of my P4 ready for carpet racing.
Car's looking great Marcel.... must be a european!
Never noticed that the new upperdeck was that narrow.
Never noticed that the new upperdeck was that narrow.
Tech Regular
iTrader: (5)
I'm starting to build my hara pro4 and made a decision to use the spool. Is there anything special I should know about when putting that togehter? There aren't instructions for it but it seems rather simple just using the four screws and the new grease. Anything else?